N4008421T0012_Attachment 1 Specification_24Jun2021.pdf
PDF 60 KB Posted
- Solicitation number
- N4008421T0012
About this file
This solicitation document requests quotations for the procurement of three vehicles to be delivered to the 403rd Air Force Sustainment Brigade Logistics Readiness Center at Torii Station, Okinawa, Japan. The solicitation seeks one truck safety loader with a minimum 3.5 ton loading capacity, one truck self loader with a minimum 3.5 ton loading capacity and cab back crane, winch and backup camera, and one truck cargo wing van with a minimum 5 ton loading capacity. Offerors must meet all mandatory vehicle characteristics and technical requirements specified in the attachment for each item, including dimensions, payload capacity, engine displacement, transmission type, warranty coverage and delivery terms. Vehicles must be new models delivered within 120-180 calendar days, with final inspection and acceptance conducted by the 403rd AFSB LRC upon delivery.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
N4008421T0012 Attachment 1
28 June 2021
ATTACHMENT 1: SPECIFICATION –
MANDATORY CHARACTERISTICS For Each Item Being Purchased Under This Solicitation
Deviations from the MANDATORY CHARACTERISTICS are not allowed and the offeror’s quote for that Item No that deviates from the MANDATORY CHARACTERISTICS will be determined non-responsive and not eligible for award.
ITEM 0001, Truck Safety Loader
GENERAL DESCRIPTION
Truck, Safety Loader (slide bed system to carry vehicle), right hand drive, minimum 3.5 Ton loading capacity and air conditioner. Offerors Proposed Vehicle for Item 0001 meets the General Description provided. YES NO
All vehicles shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0001 will be the newest model and year at the time of delivery and ready for use. YES NO
Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standards, including, but not limited to, exhaust emission control requirement, in effect on the date of manufacture.
OFFEROR AGREES: YES NO
MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS
(1) Quantity One (1) each. OFFEROR AGREES: YES NO
(2) Minimum Dimensions (Metric/Inches).
Millimeter Inches OFFEROR’S PROPOSED
VEHICLE DIMENSIONS &
MAXIMUM PAYLOAD
*Offeror to fill in blanks below.
Overall Length of Bed
5,000 197 *___________mm
Overall Width of Bed
2,060 81 *___________mm
Overall Height 2,200 87 *___________mm
MAXIMUM
Payload
3,5000 Kg
7,716 lbs.
*___________Kg
(3) Exterior Color. Manufacturer's standard gloss white color. OFFEROR AGREES: YES NO
(4) Identification Markings and Registration Numbers. None OFFEROR AGREES: YES NO
(5) Rust proofing and Undercoatings. Manufacturer’s standard. OFFEROR AGREES: YES NO
(6) Engine Displacement. Manufacture’s Standard Engine Diesel or Gas engine driven. OFFEROR’S PROPOSED
VEHICLE ENGINE DISPLACEMENT MEETS THE MINIMUM. OFFEROR AGREES: YES NO
(7) Seat Belts. Shall be installed on all passenger seats and driver's seat. OFFEROR AGREES: YES NO
(8) Transmission. Automatic transmission. OFFEROR AGREES: YES NO
(9) Speedometer/Odometer. Manufacturer's standard (in kilometer). OFFEROR AGREES: YES NO
OTHER MISCELLANEOUS REQUIREMENTS
(1) Accessories NOTE: Shall be type installed on manufacturer's standard production model.
a. Floor Mats. Manufacturer’s standard. OFFEROR AGREES: YES NO
b. Triangle Reflector. OFFEROR AGREES: YES NO
(2) Modifications
Safety Loader Section: Shall have manufacturer’s standard system and related equipment.
OFFEROR AGREES: YES NO
(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. The following dealer(s) will provide the warranty work. OFFEROR AGREES: YES NO
a. For Torii Station area:
Name of Firm*:____________________________________________________
Address*: ________________________________________________________
Telephone No.*: ___________________________________________________
(*) to be inserted by the contractor.
(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at the time of vehicle(s) delivery. OFFEROR AGREES: YES NO
(4) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicle and one (1) set of technical (shop repair) manuals and parts catalogs to be furnished for consignee by Contractor at the time of vehicle(s) delivery. OFFEROR AGREES: YES NO
DELIVERY, INSPECTION, AND ACCEPTANCE
(1) Location. All transportation charges are borne by the contractor, One (1) each to the 403d AFSB Logistics Readiness Center Torii Station Okinawa, Japan (P.O.C is Joan Fernandez, Transportation Assistant, joan.m.fernandez2.civ@mail.mil). OFFEROR AGREES: YES NO
(2) Date. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after the delivery order is issued. OFFEROR AGREES: YES NO
(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.
mailto:joan.m.fernandez2.civ@mail.mil
ITEM 0002, Truck, Self Loader
GENERAL DESCRIPTION
Truck, Self Loader (deliver the construction equipment and forklift), right-hand drive, cab back crane, winch, back up camera with monitor and air conditioner. Offerors Proposed Vehicle for Item 0002 meets the General Description provided. YES NO
All vehicles shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0002 will be the newest model and year at the time of delivery and ready for use. YES NO
Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standards, including, but not limited to, exhaust emission control requirement, in effect on the date of manufacture.
OFFEROR AGREES: YES NO
MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS
MAXIMUM PAYLOAD
*Offeror to fill in blanks below.
Overall Length 7,700 303 *___________mm Overall Width 2,490 98 *___________mm Overall Height 3,100 122 *___________mm
Cargo Loading 4,600Kg 10,141.26lbs. *____________Kg
(5) Rust proofing and Undercoatings. Manufacturer’s standard. OFFEROR AGREES: YES NO
(6) Engine Displacement. Manufacturer’s standard minimum 5193 cc. OFFEROR’S PROPOSED VEHICLE
ENGINE DISPLACEMENT MEETS THE MINIMUM. OFFEROR AGREES: YES NO
(7) Automatic Ramps. Manufacturer’s standard design and length shall be installed rear of cargo bed.
OFFEROR AGREES: YES NO
(8) Folding Retractable Twist Lock (2x2). Shall be installed on cargo bed floor for ISO 20 feet container position.
OFFEROR AGREES: YES NO
(9) Cargo Bed Floor Hook. Minimum 8 pairs recessed D-Rings shall be installed on cargo bed floor.
OFFEROR AGREES: YES NO
(10) Rope Hook. Manufacturer’s standard quantities shall be installed side of cargo bed.
(11) Seat Belts. Shall be installed on all passenger seats and driver's seat. OFFEROR AGREES: YES NO
(12) Transmission. Automatic transmission. OFFEROR AGREES: YES NO
(13) Speedometer/Odometer. Manufacturer's standard (in kilometer). OFFEROR AGREES: YES NO
OTHER MISCELLANEOUS REQUIREMENTS
(2) Modifications
a. Cab back crane section: Minimum 2.9 ton lifting capacity, 4 steps boom, outriggers and remote controller.
b. Winch section: Minimum 3.0 ton towing capacity shall be installed middle/center of protector (Torii) and remote controller. OFFEROR AGREES: YES NO
(3) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. The following dealer(s) will provide the warranty work. OFFEROR AGREES: YES NO
a. For Torii Station area:
Name of Firm*: __________________________________________________________
Address*: _______________________________________________________________
Telephone No.*: __________________________________________________________
(*) to be inserted by the contractor.
(4) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at the time of vehicle(s) delivery. OFFEROR AGREES: YES NO
(5) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicle and one (1) set of technical (shop repair) manuals and parts catalogs to be furnished for consignee by Contractor at the time of vehicle(s) delivery. OFFEROR AGREES: YES NO
DELIVERY, INSPECTION, AND ACCEPTANCE
(1) Location. All transportation charges are borne by the contractor, One (1) each to the 403d AFSB Logistics Readiness Center Torii Station Okinawa, Japan P.O.C is Joan Fernandez, Transportation Assistant, E-mail:
joan.m.fernandez2.civ@mail.mil). OFFEROR AGREES: YES NO
(2) Date. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after the delivery order is issued. OFFEROR AGREES: YES NO
(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time
ITEM 0003, Truck Cargo, Wing Van
GENERAL DESCRIPTION
Truck, cargo, minimum 5 Ton loading capacity, Wing Type Van body with back up camera and air conditioner, right hand drive. Offerors Proposed Vehicle for Item 0003 meets the General Description provided. YES NO
All vehicles shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0003 will be the newest model and year at the time of delivery and ready for use. YES NO
Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standards, including, but not limited to, exhaust emission control requirement, in effect on the date of manufacture.
OFFEROR AGREES: YES NO
MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS
MAXIMUM PAYLOAD
*Offeror to fill in blanks below.
Cargo Bed Inside Length
6,200 244 *___________mm
Cargo Bed Inside Width
2,400 94 *___________mm
Cargo Bed Inside Height
2,300 91 *___________mm
(5) Rust proofing and Undercoatings. Manufacturer’s standard. OFFEROR AGREES: YES NO
(6) Engine Displacement. Minimum 240 PS diesel engine driven. OFFEROR’S PROPOSED VEHICLE ENGINE
DISPLACEMENT MEETS THE MINIMUM. OFFEROR AGREES: YES NO
(7) Seat Belts. Shall be installed on all passenger seats and driver's seat. OFFEROR AGREES: YES NO
(8) Transmission. Manufacturer's standard. OFFEROR AGREES: YES NO
(9) Speedometer/Odometer. Manufacturer's standard (in kilometer). OFFEROR AGREES: YES NO
OTHER MISCELLANEOUS REQUIREMENTS
(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. The following dealer(s) will provide the warranty work. The following dealer(s) will provide the warranty work.
OFFEROR AGREES: YES NO
a. For Torii Station area:
Name of Firm*:_____________________________________________
Address*:__________________________________________________
Telephone No.*:_____________________________________________
(*) to be inserted by the contractor.
(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at the time of vehicle(s) delivery. OFFEROR AGREES: YES NO
(4) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicle and one (1) set of technical (shop repair) manuals and parts catalogs to be furnished for consignee by Contractor at the time of vehicle(s) delivery. OFFEROR AGREES: YES NO
DELIVERY, INSPECTION, AND ACCEPTANCE
(1) Location. All transportation charges are borne by the contractor, One (1) each to the 403d AFSB Logistics Readiness Center Torii Station Okinawa, Japan (P.O.C is Joan Fernandez, Transportation Assistant, E-mail:
joan.m.fernandez2.civ@mail.mil). OFFEROR AGREES: YES NO
(2) Date. The vehicle shall be delivered at the delivery point specified above within 180 calendar days after the delivery order is issued. OFFEROR AGREES: YES NO
(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time
| ATTACHMENT 1: SPECIFICATION – |
| MANDATORY CHARACTERISTICS For Each Item Being Purchased Under This Solicitation |
| Deviations from the MANDATORY CHARACTERISTICS are not allowed and the offeror’s quote for that Item No that deviates from the MANDATORY CHARACTERISTICS will be determined non-responsive and not eligible for award. |
| ITEM 0001, Truck Safety Loader |
| GENERAL DESCRIPTION |
| a. For Torii Station area: |
| Name of Firm*:____________________________________________________ |
| Address*: ________________________________________________________ |
| Telephone No.*: ___________________________________________________ |
| ITEM 0002, Truck, Self Loader |
| GENERAL DESCRIPTION |
| a. For Torii Station area: |
| Name of Firm*: __________________________________________________________ |
| Address*: _______________________________________________________________ |
| Telephone No.*: __________________________________________________________ |
| ITEM 0003, Truck Cargo, Wing Van |
| GENERAL DESCRIPTION |
| a. For Torii Station area: |
| Name of Firm*:_____________________________________________ |
| Address*:__________________________________________________ |
| Telephone No.*:_____________________________________________ |
File details come from the government source that posted it. Updated .