Atch(1j)_PWS_Section_J_Attachment_1502000_Kitchen_Exhaust_System_Part10.pdf

MARK: RV-1

PROJECT: OFFER 2634

DATE: 4/15/2016

T Sq.

B

G

A C

ACRU-XP

Upblast Centrifugal Exhaust Ventilator Roof Mounted/Belt Drive

STANDARD CONSTRUCTION FEATURES:

All aluminum housing - Backward inclined all aluminum wheel - Two piece top cap with stainless steel quick release latches - One piece bottom spinning - Welded curb cap corners - Birdscreen - Vibration isolators -

Lifting Lugs - Permanently lubricated ball bearing motors - Oil and heat resistant, static conducting belts - Adjustable pitch drives through 5 hp motor - Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow block housing, rated at 200,000 hours average life - All fans factory adjusted to specified fan RPM - Transit tested packaging. Standard motors ship factory installed.

Qty Catalog Number

Flow (M3/H)

SP

(Pa)

Fan

RPM

Power*

(HP) FEG

1 270RX11B 6700 563 1296 2.65 63

Performance (*Bhp includes 7% drive loss)

HP RPM Volts/Ph/Hz Enclosure FLA Mounted

5 1725 208/3/60 ODP -PE 16.7 No

Motor Information

1 2 3 4 5 6 7 8 LwA dBA Sones

80 90 93 81 77 75 74 70 87 75 26

Sound Data Inlet Sound Power by Octave Band v6.6.110.13221

Accessories:

Premium Efficiency Motor (Min. 89.5%)

DRIVES (1.5 SF) @ 1296 RPM

STD DISCONNECT NEMA1

BD-30 DAMPER

HINGED BASE KIT

A 28-1/2 B 49-1/4 C 35 G 3

T Sq. 36 Roof Open. Sq.* 31-1/2

Weight(lbs)*** Shipping 361 Unit 223 NOTE: Accessories may affect dimensions shown.

Dimensions (inches)

* Roof opening size for curbs supplied by Cook only.

***Includes fan, motor & accessories.

0.00

.600

1.20

1.80

2.40

3.00

0 2500 5000 7500 10000 12500 Flow (M3/H)

S P

P a

P o w e r (H P

Fan Curve

Fan Curve Legend

M3/H vs SP (1296)

MaxRPM( 1656)

MinRPM(750)

M3/H vs HP

Point of Operation

System Curve

Altitude (ft): 0 Temperature (F): 70

FLA based on NEC (2014) Table 430.250

ATTACHMENT J-1502000-06 - DRAWINGS FOR EXHAUST SYSTEMS

UNCLASSIFIED/FOR OFFICIAL USE ONLY

saito.shun.ja Rectangle saito.shun.ja Rectangle saito.shun.ja Typewritten Text

V-BELT

Manufacturer : Jason Industrial Co.

Part Number : A28 (4L300) Quantity : 2EA saito.shun.ja Typewritten Text

MARK: RV-2

DATE: 4/15/2016

T Sq.

B

G

A C

ACRU-HP

Upblast Centrifugal Exhaust Ventilator Roof Mounted/Belt Drive

STANDARD CONSTRUCTION FEATURES:

All aluminum housing - Backward inclined all aluminum wheel - Two piece top cap with stainless steel quick release latches - One piece bottom spinning - Welded curb cap corners - Birdscreen - Vibration isolators -

Lifting Lugs - Permanently lubricated ball bearing motors - Oil and heat resistant, static conducting belts - Adjustable pitch drives through 5 hp motor - Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow block housing, rated at 200,000 hours average life - All fans factory adjusted to specified fan RPM - Transit tested packaging. Standard motors ship factory installed.

Qty Catalog Number

Flow (M3/H)

SP

(Pa)

Fan

RPM

Power*

(HP) FEG

1 225RH10B 7511 547 1374 2.96 60

Performance (*Bhp includes 7% drive loss)

HP RPM Volts/Ph/Hz Enclosure FLA Mounted

3 1725 208/3/60 ODP -PE 10.6 Yes

Motor Information

1 2 3 4 5 6 7 8 LwA dBA Sones

81 93 98 82 77 75 73 69 91 79 32

Sound Data Inlet Sound Power by Octave Band v6.6.110.13221

Accessories:

Premium Efficiency Motor (Min. 89.5%)

DRIVES (1.5 SF) @ 1374 RPM

STD DISCONNECT NEMA1

BD-24 DAMPER

HINGED BASE KIT

A 25-15/16 B 45-1/4 C 35-1/2 G 3

T Sq. 30 Roof Open. Sq.* 25-1/2

Weight(lbs)*** Shipping 309 Unit 182 NOTE: Accessories may affect dimensions shown.

Dimensions (inches)

* Roof opening size for curbs supplied by Cook only.

***Includes fan, motor & accessories.

0.00

.600

1.20

1.80

2.40

3.00

0 3000 6000 9000 12000 15000 Flow (M3/H)

S P

P a

P o w e r (H P

Fan Curve

Fan Curve Legend

M3/H vs SP (1374)

MaxRPM( 1435)

MinRPM(750)

M3/H vs HP

Point of Operation

System Curve

Altitude (ft): 0 Temperature (F): 70

FLA based on NEC (2014) Table 430.250

ATTACHMENT J-1502000-06 - DRAWINGS FOR EXHAUST SYSTEMS

UNCLASSIFIED/FOR OFFICIAL USE ONLY

saito.shun.ja Rectangle saito.shun.ja Rectangle saito.shun.ja Typewritten Text

V-BELT

Manufacturer : Continental ContiTech Co.

Part Number : AX28 (Torque-Flex) Quantity : 1EA

MARK: RV-3

DATE: 4/15/2016

T Sq.

B

G

A C

ACRU-HP

Upblast Centrifugal Exhaust Ventilator Roof Mounted/Belt Drive

STANDARD CONSTRUCTION FEATURES:

All aluminum housing - Backward inclined all aluminum wheel - Two piece top cap with stainless steel quick release latches - One piece bottom spinning - Welded curb cap corners - Birdscreen - Vibration isolators -

Lifting Lugs - Permanently lubricated ball bearing motors - Oil and heat resistant, static conducting belts - Adjustable pitch drives through 5 hp motor - Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow block housing, rated at 200,000 hours average life - All fans factory adjusted to specified fan RPM - Transit tested packaging. Standard motors ship factory installed.

Qty Catalog Number

Flow (M3/H)

SP

(Pa)

Fan

RPM

Power*

(HP) FEG

1 210RH9B 4039 593 1394 1.90 60

Performance (*Bhp includes 7% drive loss)

HP RPM Volts/Ph/Hz Enclosure FLA Mounted

2 1725 208/3/60 ODP -PE 7.5 Yes

Motor Information

1 2 3 4 5 6 7 8 LwA dBA Sones

84 85 80 79 73 72 70 66 81 69 18.6

Sound Data Inlet Sound Power by Octave Band v6.6.110.13221

Accessories:

Premium Efficiency Motor (Min. 86.5%)

DRIVES (1.5 SF) @ 1394 RPM

STD DISCONNECT NEMA1

BD-24 DAMPER

HINGED BASE KIT

A 25-15/16 B 45-1/4 C 35-3/8 G 3

T Sq. 30 Roof Open. Sq.* 25-1/2

Weight(lbs)*** Shipping 306 Unit 179 NOTE: Accessories may affect dimensions shown.

Dimensions (inches)

* Roof opening size for curbs supplied by Cook only.

***Includes fan, motor & accessories.

0.00

.600

1.20

1.80

2.40

3.00

0 2500 5000 7500 10000 12500 Flow (M3/H)

S P

P a

P o w e r (H P

Fan Curve

Fan Curve Legend

M3/H vs SP (1394)

MaxRPM( 1626)

MinRPM(735)

M3/H vs HP

Point of Operation

System Curve

Altitude (ft): 0 Temperature (F): 70

FLA based on NEC (2014) Table 430.250

ATTACHMENT J-1502000-06 - DRAWINGS FOR EXHAUST SYSTEMS

UNCLASSIFIED/FOR OFFICIAL USE ONLY

saito.shun.ja Rectangle saito.shun.ja Rectangle saito.shun.ja Typewritten Text

V-BELT

Manufacturer : Jason Industrial Co.

Part Number : A25 (4L270) Quantity : 1EA

MARK: RV-4

DATE: 4/15/2016

T Sq.

B

G

A C

ACRU-XP

Upblast Centrifugal Exhaust Ventilator Roof Mounted/Belt Drive

STANDARD CONSTRUCTION FEATURES:

All aluminum housing - Backward inclined all aluminum wheel - Two piece top cap with stainless steel quick release latches - One piece bottom spinning - Welded curb cap corners - Birdscreen - Vibration isolators -

Lifting Lugs - Permanently lubricated ball bearing motors - Oil and heat resistant, static conducting belts - Adjustable pitch drives through 5 hp motor - Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow block housing, rated at 200,000 hours average life - All fans factory adjusted to specified fan RPM - Transit tested packaging. Standard motors ship factory installed.

Qty Catalog Number

Flow (M3/H)

SP

(Pa)

Fan

RPM

Power*

(HP) FEG

1 270RX11B 9299 575 1614 4.65 63

Performance (*Bhp includes 5% drive loss)

HP RPM Volts/Ph/Hz Enclosure FLA Mounted

5 1725 208/3/60 ODP -PE 16.7 No

Motor Information

1 2 3 4 5 6 7 8 LwA dBA Sones

82 90 101 89 84 81 79 77 94 83 41

Sound Data Inlet Sound Power by Octave Band v6.6.110.13221

Accessories:

Premium Efficiency Motor (Min. 89.5%)

DRIVES (1.5 SF) @ 1614 RPM

STD DISCONNECT NEMA1

BD-30 DAMPER

HINGED BASE KIT

A 28-1/2 B 49-1/4 C 35 G 3

T Sq. 36 Roof Open. Sq.* 31-1/2

Weight(lbs)*** Shipping 363 Unit 225 NOTE: Accessories may affect dimensions shown.

Dimensions (inches)

* Roof opening size for curbs supplied by Cook only.

***Includes fan, motor & accessories.

0.00

1.50

3.00

4.50

6.00

7.50

0 2500 5000 7500 10000 12500 Flow (M3/H)

S P

P a

P o w e r (H P

Fan Curve

Fan Curve Legend

M3/H vs SP (1614)

MaxRPM( 1656)

MinRPM(750)

M3/H vs HP

Point of Operation

System Curve

Altitude (ft): 0 Temperature (F): 70

FLA based on NEC (2014) Table 430.250

ATTACHMENT J-1502000-06 - DRAWINGS FOR EXHAUST SYSTEMS

UNCLASSIFIED/FOR OFFICIAL USE ONLY

saito.shun.ja Rectangle saito.shun.ja Rectangle saito.shun.ja Typewritten Text

V-BELT

Manufacturer : Bando Chemical Industries Co.

Part Number : A26 Quantity : 2EA

MARK: RV-5

DATE: 4/15/2016

T Sq.

B

G

A C

ACRU-XP

Upblast Centrifugal Exhaust Ventilator Roof Mounted/Belt Drive

STANDARD CONSTRUCTION FEATURES:

All aluminum housing - Backward inclined all aluminum wheel - Two piece top cap with stainless steel quick release latches - One piece bottom spinning - Welded curb cap corners - Birdscreen - Vibration isolators -

Lifting Lugs - Permanently lubricated ball bearing motors - Oil and heat resistant, static conducting belts - Adjustable pitch drives through 5 hp motor - Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow block housing, rated at 200,000 hours average life - All fans factory adjusted to specified fan RPM - Transit tested packaging. Standard motors ship factory installed.

Qty Catalog Number

Flow (M3/H)

SP

(Pa)

Fan

RPM

Power*

(HP) FEG

1 365RX11B 10835 575 883 3.98 67

Performance (*Bhp includes 6% drive loss)

HP RPM Volts/Ph/Hz Enclosure FLA Mounted

5 1725 208/3/60 ODP -PE 16.7 Yes

Motor Information

1 2 3 4 5 6 7 8 LwA dBA Sones

84 87 86 81 77 76 72 66 84 72 22

Sound Data Inlet Sound Power by Octave Band v6.6.110.13221

Accessories:

Premium Efficiency Motor (Min. 89.5%)

DRIVES (1.5 SF) @ 883 RPM

STD DISCONNECT NEMA1

BD-36 DAMPER

A 36-3/8 B 64-1/4 C 44-1/4 G 3

T Sq. 42 Roof Open. Sq.* 37-1/2

Weight(lbs)*** Shipping 484 Unit 275 NOTE: Accessories may affect dimensions shown.

Dimensions (inches)

* Roof opening size for curbs supplied by Cook only.

***Includes fan, motor & accessories.

0.00

1.00

2.00

3.00

4.00

5.00

0 5000 10000 15000 20000 25000 Flow (M3/H)

S P

P a

P o w e r (H P

Fan Curve

Fan Curve Legend

M3/H vs SP (883)

MaxRPM( 1132)

MinRPM(550)

M3/H vs HP

Point of Operation

System Curve

Altitude (ft): 0 Temperature (F): 70

FLA based on NEC (2014) Table 430.250

ATTACHMENT J-1502000-06 - DRAWINGS FOR EXHAUST SYSTEMS

UNCLASSIFIED/FOR OFFICIAL USE ONLY

saito.shun.ja Rectangle saito.shun.ja Rectangle saito.shun.ja Typewritten Text

V-BELT

Manufacturer : Jason Industrial Co.

Part Number : A35 (4L370)

MARK: RV-6

DATE: 4/15/2016

T Sq.

B

G

A C

ACRU-XP

Upblast Centrifugal Exhaust Ventilator Roof Mounted/Belt Drive

STANDARD CONSTRUCTION FEATURES:

All aluminum housing - Backward inclined all aluminum wheel - Two piece top cap with stainless steel quick release latches - One piece bottom spinning - Welded curb cap corners - Birdscreen - Vibration isolators -

Lifting Lugs - Permanently lubricated ball bearing motors - Oil and heat resistant, static conducting belts - Adjustable pitch drives through 5 hp motor - Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow block housing, rated at 200,000 hours average life - All fans factory adjusted to specified fan RPM - Transit tested packaging. Standard motors ship factory installed.

Qty Catalog Number

Flow (M3/H)

SP

(Pa)

Fan

RPM

Power*

(HP) FEG

1 270RX11B 8680 670 1572 4.48 63

Performance (*Bhp includes 5% drive loss)

HP RPM Volts/Ph/Hz Enclosure FLA Mounted

5 1725 208/3/60 ODP -PE 16.7 No

Motor Information

1 2 3 4 5 6 7 8 LwA dBA Sones

82 91 101 87 83 80 79 76 94 82 39

Sound Data Inlet Sound Power by Octave Band v6.6.110.13221

Accessories:

Premium Efficiency Motor (Min. 89.5%)

DRIVES (1.5 SF) @ 1572 RPM

STD DISCONNECT NEMA1

BD-30 DAMPER

HINGED BASE KIT

A 28-1/2 B 49-1/4 C 35 G 3

T Sq. 36 Roof Open. Sq.* 31-1/2

Weight(lbs)*** Shipping 363 Unit 225 NOTE: Accessories may affect dimensions shown.

Dimensions (inches)

* Roof opening size for curbs supplied by Cook only.

***Includes fan, motor & accessories.

0.00

1.00

2.00

3.00

4.00

5.00

0 2500 5000 7500 10000 12500 Flow (M3/H)

S P

P a

P o w e r (H P

Fan Curve

Fan Curve Legend

M3/H vs SP (1572)

MaxRPM( 1656)

MinRPM(750)

M3/H vs HP

Point of Operation

System Curve

Altitude (ft): 0 Temperature (F): 70

FLA based on NEC (2014) Table 430.250

ATTACHMENT J-1502000-06 - DRAWINGS FOR EXHAUST SYSTEMS

UNCLASSIFIED/FOR OFFICIAL USE ONLY

saito.shun.ja Rectangle saito.shun.ja Rectangle saito.shun.ja Typewritten Text

V-BELT

Manufacturer : Continental ContiTech Co.

Part Number : AX26 (Torque-Flex)

MARK: RV-7

DATE: 4/15/2016

T Sq.

B

G

A C

ACRU-HP

Upblast Centrifugal Exhaust Ventilator Roof Mounted/Belt Drive

STANDARD CONSTRUCTION FEATURES:

All aluminum housing - Backward inclined all aluminum wheel - Two piece top cap with stainless steel quick release latches - One piece bottom spinning - Welded curb cap corners - Birdscreen - Vibration isolators -

Lifting Lugs - Permanently lubricated ball bearing motors - Oil and heat resistant, static conducting belts - Adjustable pitch drives through 5 hp motor - Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow block housing, rated at 200,000 hours average life - All fans factory adjusted to specified fan RPM - Transit tested packaging. Standard motors ship factory installed.

Qty Catalog Number

Flow (M3/H)

SP

(Pa)

Fan

RPM

Power*

(HP) FEG

1 210RH10B 5421 539 1395 2.09 60

Performance (*Bhp includes 7% drive loss)

HP RPM Volts/Ph/Hz Enclosure FLA Mounted

3 1725 208/3/60 ODP -PE 10.6 Yes

Motor Information

1 2 3 4 5 6 7 8 LwA dBA Sones

82 84 82 80 74 73 71 67 82 70 19.2

Sound Data Inlet Sound Power by Octave Band v6.6.110.13221

Accessories:

Premium Efficiency Motor (Min. 89.5%)

DRIVES (1.5 SF) @ 1395 RPM

STD DISCONNECT NEMA1

BD-24 DAMPER

HINGED BASE KIT

A 25-15/16 B 45-1/4 C 35-3/8 G 3

T Sq. 30 Roof Open. Sq.* 25-1/2

Weight(lbs)*** Shipping 323 Unit 196 NOTE: Accessories may affect dimensions shown.

Dimensions (inches)

* Roof opening size for curbs supplied by Cook only.

***Includes fan, motor & accessories.

0.00

.600

1.20

1.80

2.40

3.00

0 2500 5000 7500 10000 12500 Flow (M3/H)

S P

P a

P o w e r (H P

Fan Curve

Fan Curve Legend

M3/H vs SP (1395)

MaxRPM( 1626)

MinRPM(735)

M3/H vs HP

Point of Operation

System Curve

Altitude (ft): 0 Temperature (F): 70

FLA based on NEC (2014) Table 430.250

ATTACHMENT J-1502000-06 - DRAWINGS FOR EXHAUST SYSTEMS

UNCLASSIFIED/FOR OFFICIAL USE ONLY

saito.shun.ja Rectangle saito.shun.ja Rectangle saito.shun.ja Typewritten Text

V-BELT

Manufacturer : Bando Chemical Industries Co.

Part Number : A25

UNCLASSIFIED/FOR OFFICIAL USE ONLY

ATTACHMENT J-1502000-06

DRAWINGS FOR EXHAUST SYSTEMS

Drawing Number 10

The Hangar E-Club

First Floor BK and Taco Bell

Second Floor Enlisted Club

(9 pages)

Building Number 1600

UNCLASSIFIED/FOR OFFICIAL USE ONLY

hirohiko.shiraki.ja Rectangle hirohiko.shiraki.ja Typewritten Text

BLDG#1600

UNCLASSIFIED/FOR OFFICIAL USE ONLY

hirohiko.shiraki.ja Rectangle hirohiko.shiraki.ja Rectangle hirohiko.shiraki.ja Rectangle hirohiko.shiraki.ja Rectangle hirohiko.shiraki.ja Rectangle

UNCLASSIFIED/FOR OFFICIAL USE ONLY

hirohiko.shiraki.ja Highlight hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line hirohiko.shiraki.ja Line saito.shun.ja Pencil saito.shun.ja Pencil hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Pencil hirohiko.shiraki.ja Pencil saito.shun.ja Pencil saito.shun.ja Pencil saito.shun.ja Pencil saito.shun.ja Pencil saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Typewritten Text

FROM FHD 1-1

saito.shun.ja Typewritten Text

FROM FHD 1-2

saito.shun.ja Typewritten Text

FROM FHD 1-3

saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line

UNCLASSIFIED/FOR OFFICIAL USE ONLY

hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Rectangle hirohiko.shiraki.ja Rectangle hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Rectangle saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line saito.shun.ja Line

Line

UNCLASSIFIED/FOR OFFICIAL USE ONLY

hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Oval hirohiko.shiraki.ja Oval

ATTACHMENT J-1502000-06 - DRAWINGS FOR EXHAUST SYSTEMS

saito.shun.ja Rectangle saito.shun.ja Rectangle

0121079 タイプライタ

UNCLASSIFIED/FOR OFFICIAL USE ONLY

0121079 直線

0121079 矢印 saito.shun.ja Rectangle saito.shun.ja Rectangle saito.shun.ja Typewritten Text

V-BELT SIZE : A-82

Drawing Number 11

Flight Line Dining Facility

(9 pages)

Building Number 6222