J-1700000-03 Historial Data Cranes.xlsx

XLSX spreadsheet 30 KB Posted Jan 7, 2020

Attached to: NSA Patuxent River Facilties Support Services (PAX FSS)
Solicitation number: N40080
Issued by: Department of the Navy Naval Facilities Engineering Command

About this file

Written by GovTribe AI · Dec 27, 2023

This pre-solicitation notice announces an upcoming solicitation for facilities support services at Naval Support Activity Patuxent River locations. The single-award IDIQ contract will have a one-year base period and four one-year option periods, not to exceed 66 months total. Services include custodial, pest control, grounds maintenance, landscaping, pavement clearance, transportation, and material handling. The incumbent contractor is Diversified Service Contracting, Inc. under an $71M contract. The NAICS code is 561720 with a $19.5M size standard. The solicitation will utilize FAR Part 15 procedures and a tradeoff source selection method. The RFP is targeted for release on 30 January 2020 with proposals due 20 February 2020. This procurement will be set aside for 8(a) certified small businesses. Interested contractors must register in SAM and monitor the beta.SAM website for solicitation amendments.

The pre-solicitation notice provides details on an upcoming solicitation for facilities support services at Naval Support Activity Patuxent River locations. Services will include custodial, pest control, grounds maintenance, and transportation/material handling. The single-award IDIQ contract is estimated at $71M with a base period of one year and four one-year options not to exceed 66 months total. The solicitation process and award will be restricted to certified 8(a) small businesses. The final RFP is scheduled for January 2020 with proposals due the following month.

View the file

Other files

File	Type	Posted
JB-1_FTE_SHEET_PAX FSS.xlsx	XLSX spreadsheet	Jan 7, 2020
J-0200000-02 CBA 2012-5371.PDF	PDF	Jan 7, 2020
J-1503020-04 Frequencies for MWR.pdf	PDF	Jan 7, 2020
J-0200000-02 WD 2015-4281 Revision 11.pdf	PDF	Jan 7, 2020
J-1503010-06 NAS PAX Webster Field Map.PDF	PDF	Jan 7, 2020
J-1503060-07 PAX Sidewalk Maps.pdf	PDF	Jan 7, 2020
J-1503050-08 Prestige and Improved Inventory MRS.xlsx	XLSX spreadsheet	Jan 7, 2020
J-1700000-01 Fleet Inventory Final.xlsx	XLSX spreadsheet	Jan 7, 2020
J-0200000-05-04 Crane and Rigging Gear Near Miss Form.pdf	PDF	Jan 7, 2020
J-1503060-08 PAX Airfield Sweeping Map.pdf	PDF	Jan 7, 2020
J-1503020-04 Frequencies for NAWC.pdf	PDF	Jan 7, 2020
J-1503060-06 Snow Removal Site Maps.pdf	PDF	Jan 7, 2020
J-1503010-06 NAS Patuxent River Map.PDF	PDF	Jan 7, 2020
J-1503020-04 Frequencies for NDW Solomons.pdf	PDF	Jan 7, 2020
J-0200000-02 CBA for Local Lodge 4.pdf	PDF	Jan 7, 2020
J-1503010-05 Custodial Inventory.xlsx	XLSX spreadsheet	Jan 7, 2020
N40080-20-D-0001 Inquiry Form.xls	XLS spreadsheet	Jan 7, 2020
J-1503050-08 Prestige and Improved Inventory.xlsx	XLSX spreadsheet	Jan 7, 2020
J-1503020-14 Fence Maps.pdf	PDF	Jan 7, 2020
J-1503020-04 Sustained Services.pdf	PDF	Jan 7, 2020
J-0200000-09_ELINS_PAX_FSS.xlsx	XLSX spreadsheet	Jan 7, 2020
J-1503010-06 NAS PAX Solomon's Island Map.PDF	PDF	Jan 7, 2020
J-0200000-02 CBA 2012-5372.pdf	PDF	Jan 7, 2020
J-1503020-04 Frequencies for NDW.pdf	PDF	Jan 7, 2020
J-0200000-02 WD 2015-4279 Revision 6.pdf	PDF	Jan 7, 2020
J-1503020-04 Frequencies for NAVFAC.pdf	PDF	Jan 7, 2020
J-1503050-07 Site Maps for Grounds Maintenance.pdf	PDF	Jan 7, 2020
J-1503050-09 BASH Areas.pdf	PDF	Jan 7, 2020
J-0200000-05-03 Crane and Rigging Gear Accident Report Form.pdf	PDF	Jan 7, 2020
PAX FSS N40080-20-R-0001 DRAFT Solicitation.pdf	PDF	Jan 7, 2020
J-1503060-04 PAX Sidewalk Inventory.XLSX	XLSX spreadsheet	Jan 7, 2020
J-1503060-03 Pavement Clearing Inventory.xlsx	XLSX spreadsheet	Jan 7, 2020
J-1503020-04 Frequencies for DECA.pdf	PDF	Jan 7, 2020
J-0200000-05-01 Crane Checklist Form.pdf	PDF	Jan 7, 2020
J-1503020-12 Historial Data Pest Control Service Calls.pdf	PDF	Jan 7, 2020

Show all 35

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

2017-2018

	Lift Ticket No.	Date Received from PW	Locataion	Building or Area	NAWC/NDW	Date Requested	Time Requested	# Days Advance Notice	Description	Type of Crane Used
	1	8/21/17	PAX	EMP 2100	NAWC	11/21/17	8:30 AM	93	EMP Site Manlift Day 1	65T
	2	8/21/17	PAX	EMP 2100	NAWC	11/22/17	8:30 AM	94	Emp Site Manlift Day 2 (backup for rain)	65T
	3	10/6/17	PAX	VQ4	NDW	10/19/17	8:00 AM	14	Lifting a 32,000 pound mobile armory off a flat bed truck, placing it adjacent to BLDG 2199, then shimming the
armory to level it and anchoring it to the ground	55T
	4	11/7/17	PAX	FARM	NAWC	11/20/17	7:00 AM	14	This is a single crane lift request for the lifting and placement of probing gear on top of the heavy positioner on Bldg 2193. The crane is to place a large metal bracket, a small 53230 positioner, and a lattice tower stacked on top of the heavy positioner. Weight of the heaviest item is 1750lbs	55T
	5	11/7/17	PAX	FARM	NAWC	11/20/17	7:00 AM	14	This is a single crane lift request for the lifting and placement of a 40’ metal tower. On the tower there currently exists a cabinet and small antenna; both of those items must be removed first. Then the tower is to be lifted off of its existing trailer and placed on a concrete pad. The concrete pad has 4 metal plate, the tower must be held in place while the tower is welded to the plates	55T
	6	11/7/17	PAX	FARM	NAWC	11/27/17	7:00 AM	21	This is a single crane lift of a test article installed on the FARM F-18 model. The test article is located in the centerline position on the model. The request is to remove the test article and place in a provided stand on the ground.	55T
	7	11/7/17	PAX	FARM	NAWC	11/27/17	7:00 AM	21	This is a single crane lift of a test article installed on the FARM F-18 model. The test article is located in the centerline position on the model. The request is to remove the test article and place in a provided stand on the ground.	55T
	8	11/7/17	Webster	8271	NAWC	11/28/17	8:00 AM	22	AN/SPN-43C antenna pedestal needs to be lifted from a 23 foot tower to the ground and replaced with a different pedestal to the 23 foot tower.	55T
	9	11/7/17	Webster	8165	NAWC	11/30/17	8:00 AM	24	We need to remove DDG118 antennas (6 total) from the roof of 8165 and install DDG119 antennas (6 total).	55T
	10	11/7/17	PAX	FARM	NAWC	11/30/17	8:00 AM	24	This is a single crane lift of a test article installed on the FARM F-18 model. The test article is located in the centerline position on the model. The request is to remove the test article and place in a provided stand on the ground.	55T
	11	11/30/17	PAX	FARM	NAWC	12/1/17	8:00 AM	2	This is a single crane lift of a test article installed on the FARM F-18 model. The test article is located in the centerline position on the model. The request is to remove the test article and place in a provided stand on the ground.	55T
	12	12/4/17	PAX	2641 (SAIL)	NAWC	12/14/17	8:00 AM	11	Items from the 64' Platform need to be lifted and placed on the ground.	55T
	13	12/5/17	PAX	FARM	NAWC	12/19/17	8:00 AM	15	This is a single crane lift request for the removal and then the re-install of a test device approximately the same size as an aircraft fuel cell. The effort is to remove the device from the F-18 model, some work needs to be done on the test device, then re-install the test device. The amount of time required for the work is approximately 1 hour. Device is to be mounted on the centerline station of the FARM F-18 model.	55T
	14	12/18/17	Webster	8271	NAWC	12/28/17	8:00 AM	11	AN/SPN antenna pedestal needs to lifted from a 23ft tower to the ground and replaced with a different pedestal to the 23ft. tower	55T
	15	1/2/18	Webster	8054	NAWC	1/16/18	1:00 PM	15	The 1500 lb., 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be put up onto tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.T	55T
	16	1/12/18	PAX	FARM (3200)	NAWC	1/19/18	8:00 AM	8	This is a single crane lift request for the installation of two devices in the Bldg 3200 chamber. The first device is a model tower base, the second device is a model tower shaft. Both devices need to be mounted onto a positioner located inside the chamber area. A large exterior door can be opened to gain access	55T
	17	1/12/18	PAX	FARM (2197)	NAWC	1/23/18	8:00 AM	12	This is a single crane lift request for the removal and then the re-install of a test device approximately the same size as an aircraft fuel cell. The effort is to remove the device from the F-18 model, some work needs to be done on the test device, then re-install the test device. The amount of time required for the work is approximately 1 hour. Device is to be mounted on the centerline station of the FARM F-18 model.	55T
	18	1/16/18	PAX	1630 ATR	NAWC	2/5/18	8:00 AM	21	lifting off equipment cabinets from pedestal 6 on the lower radar deck	55T
	19	1/16/18	PAX	1630 ATR	NAWC	2/27/18	8:00 AM	43	lifting equipment cabinets back onto the pedestal three weeks later	55T
	20	1/18/18	Webster	8054	NAWC	1/23/18	1:00 PM	6	The 1500 lb., 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be put up onto tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	21	1/18/18	Webster	8054	NAWC	1/29/18	8:00 AM	12	The 1500 lb., 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be put up onto tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	22	1/8/18	Webster	8054	NAWC	1/17/18	1:00 PM	10	This is a single crane lift request for the removal and then the re-install of a test device approximately the same size as an aircraft fuel cell. The effort is to remove the device from the F-18 model, some work needs to be done on the test device, then re-install the test device. The amount of time required for the work is approximately 1 hour. Device is to be mounted on the centerline station of the FARM F-18 model.	55T
	23	1/22/18	PAX	FARM (2197)	NAWC	1/30/18	8:00 AM	9	This is a single crane lift request for the removal and then the re-install of a test device approximately the same size as an aircraft fuel cell. The effort is to remove the device from the F-18 model, some work needs to be done on the test device, then re-install the test device. The amount of time required for the work is approximately 1 hour. Device is to be mounted on the centerline station of the FARM F-18 model.	55T
	24	1/24/18	PAX	2122	NAWC	1/31/18	8:00 AM	8	The 861lb Radar Set Group OY-80(V)3/SPN-46(V) (quantity 1) that are bolted to the tower platforms will be taken down and new antennas lifted into their place. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	25	1/16/18	PAX	1630 ATR	NAWC	2/5/18	8:00 AM	21	lifting off equipment cabinets from pedestal 6 on the lower radar deck	55T
	26	2/20/18	Webster	8054	NAWC	3/5/18	1:00 PM	14	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be put up onto tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	27	2/22/18	PAX	2122	NAWC	3/7/18	8:00 AM	14	The 861lb Radar Set Group OY-80(V)3/SPN-46(V) (quantity 1) that are bolted to the tower platforms will be taken down and new antennas lifted into their place. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	28	2/26/18	Webster	8054	NAWC	3/9/18	8:00 AM	12	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be taken down from the tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	29	2/27/18	PAX	FARM 2197	NAWC	3/7/18	9:00 AM	9	This is a single crane lift request for the removal and then the re-install of a test device approximately the same size as an aircraft fuel cell. The effort is to remove the device from the F-18 model, some work needs to be done on the test device, then re-install the test device. The amount of time required for the work is approximately 1 hour. Device is to be mounted on the centerline station of the FARM F-18 model.	55T
	30	3/1/18	Webster	8054	NAWC	3/13/18	1:00 PM	13	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be put up onto tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	31	3/5/18	Webster	8054	NAWC	3/19/18	8:00 AM	15	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be put up onto tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	32	3/6/18	Webster	8271	NAWC	3/27/18	8:00 AM	22	AN/SPN-43C antenna pedestal needs to be lifted from a 23 foot tower to the ground and replaced with a different pedestal to the 23 foot tower.	55T
	33	3/5/18	PAX	EMP 2100	NAWC	4/17/18	8:00 AM	44	EMP Site Manlift Day 1	65T
	34	3/5/18	PAX	EMP 2100	NAWC	4/18/18	8:00 AM	45	Emp Site Manlift Day 2 (backup for rain)	65T
	35	3/6/18	PAX	FARM 2197	NAWC	3/9/18	9:00 AM	4	This is a single crane lift request for the removal and then the re-install of a test device approximately the same size as an aircraft fuel cell. The effort is to remove the device from the F-18 model, some work needs to be done on the test device, then re-install the test device. The amount of time required for the work is approximately 1 hour. Device is to be mounted on the centerline station of the FARM F-18 model.	55T
	36	3/13/18	Webster	8054	NAWC	3/28/18	1:00 PM	16	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	37	3/13/18	Webster	8054	NAWC	3/30/18	1:00 PM	18	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	38	3/27/18	Webster	8054	NAWC	4/9/18	8:00 AM	14	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	39	3/28/18	Webster	8054	NAWC	3/30/18	1:00 PM	3	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	40	3/27/18	PAX	2197 (FARM)	NAWC	4/3/18	8:00 AM	8	This is a single crane lift request for the removal of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model.	55T
	41	3/27/18	PAX	2197 (FARM)	NAWC	4/6/18	8:00 AM	11	This is a single crane lift request for the installation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model.	55T
	42/44	3/30/18	PAX	2122	NAWC	4/9/18	7:00 AM	11	The 861lb Radar Set Group OY-80(V)3/SPN-46(V) (quantity 1) that are bolted to the tower platforms will be taken down and new antennas lifted into their place. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC	55T
	43	3/28/18	Webster	8054	NAWC	3/30/18	1:00 PM	3	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	44	3/30/18	PAX	2122	NAWC	4/13/18	7:00 AM	15	The 861lb Radar Set Group OY-80(V)3/SPN-46(V) (quantity 1) that are bolted to the tower platforms will be taken down and new antennas lifted into their place. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC	55T
	45	4/9/18	Webster	8054	NAWC	4/13/18	1:00 PM	5	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
	46	4/9/18	PAX	2197 (FARM)	NAWC	4/17/18	8:00 AM	9	This is a single crane lift request for the installation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model.	55T
	47	4/9/18	PAX	2193 (FARM)	NAWC	4/17/18	8:00 AM	9	This request is for two efforts. First effort is the moving of a large ground plane to a trailer located in the field at Bldg 2193. Second effort is to install a lattice towers on the top of the upper positioner located at Bldg 2193	55T
	48	4/9/18	PAX	2197 (FARM)	NAWC	4/25/18	8:00 AM	17	This is a single crane lift request for the installation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model.	Cancelled - Charged Lift
	49	4/10/18	PAX	Hangar 144	NAWC	4/30/18	1:00 PM	21	Three block approximately 32" high will be strategically positioned in the hangar to match the F-35B landing gear. The F-35B will then be hoisted and positioned on the blocks.	65T
	50	4/9/18	PAX	2197(Farm)	NAWC	5/2/18	8:00 AM	24	This is a single crane lift request for the installation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model.	Cancelled - Charged Lift
	51	4/9/18	PAX	2197(Farm)	NAWC	5/10/18	8:00 AM	32	This is a single crane lift request for the installation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model.	55T
	52	4/9/18	PAX	2197(Farm)	NAWC	5/15/18	8:00 AM	37	This request is for crane service at the FARM for the purpose of removing the F-18E model from the Bldg 2197 tower, moving the model mounting bracket to the bottom side of the model, then installing the model right side up on the Bldg 2197 tower. Removal of the F-18E model, setting it in the stands, and moving the bracket to the bottom side of the model can be done by a single crane. The flipping and installation of the model will require two cranes.	65T
	53									55T
	54	4/9/18	PAX	2197(Farm)	NAWC	5/29/18	8:00 AM	51	This request is for crane service at the FARM for the purpose of removing the F-18E model from the Bldg 2197 tower, moving the model mounting bracket to the top side of the model, then installing the model upside down on the Bldg 2197 tower.

Removal of the F-18E model, setting it in the stands, and moving the bracket to the top side of the model can be done by a single crane. The flipping and installation of the model will require two cranes.

Cancelled - Charged Lift
55							1		Cancelled - Charged Lift
56	4/13/18	Webster	8054	NAWC	4/16/18	8:00 AM	4	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
57	4/17/18	Webster	8054	NAWC	4/23/18	8:00 AM	7	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
58	4/17/18	Webster	8054	NAWC	4/30/18	1:00 PM	14	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be put up onto tower 8054. The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
59	5/10/18	PAX	2197 (FARM)	NAWC	5/24/18	8:00 AM	15	This is a single crane lift request for the installation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model.	55T
60	4/26/18	Webster	8054	NAWC	5/4/18	1:00 PM	9	he 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be taken off of tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
61	4/26/18	Pax	1461	NAWC	5/9/18	9:00 AM	14	LIFT 32K Equipment off of Truck and set by the Bay	65T
62	4/27/18	PAX	Hangar 144	NAWC	5/14/18	1:00 PM	18	Three block approximately 32" high will be strategically positioned in the hangar to match the F-35B landing gear. The F-35B will then be hoisted and positioned on the blocks.	65T
63	5/1/18	PAX	2197(Farm)	NAWC	5/10/18	8:00 AM	10	This is a single crane lift request for the installation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model.	55T
64	5/4/18	Webster	8054	NAWC	5/7/18	1:00 PM	4	he 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be taken off of tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
65	5/9/18	PAX	Hangar 144	NAWC	5/21/18	1:00 PM	13	Three block approximately 32" high will be strategically positioned in the hangar to match the F-35B landing gear. The F-35B will then be hoisted and positioned on the blocks.	65T
66	5/15/18	Webster	8054	NAWC	5/16/18	1:00 PM	2	Requested date of lift: 05/16/18 or soonest availability thereafter Requested time of lift: 1300 Customer POC for lift: Pat Murphy; John Davis Customer POC for lift phone number: 301-995-6903; 301-995-8108 Number of days required: 1 Lift height (feet): 56 Lift weight (pounds): 1500/300 Lift location: Tower 8054 Overhead obstruction: no Detailed description of lift: The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be taken off of tower 8054. The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high will be installed on tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
67	5/15/18	Webster	8165	NAWC	6/12/18	8:00 AM	29	We need to remove DDG120 antennas (6 total) from the roof of 8165 and install DDG121 antennas (4 total).	55T
68	5/18/18	Webster	8054	NAWC	5/24/18	1:00 PM	7	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
69	5/21/18	PAX	FARM(2197)	NAWC	6/12/18	8:00 AM	23	This is a single crane lift request for the removal and reinstallation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model. Once the device is removed from the F-18 model work must be done to reconfigure it, should take 2 hours or less. Then the reconfigured test device needs to be reinstalled in the same location on the F-18 model.	55T
70	5/22/18	Webster	8131	NAWC	5/25/18	8:00 AM	4	Lift AN/SPN-50 antenna group from ground level and mount on top of the 35 foot tower	55T
71	5/29/18	Webster	8054	NAWC	6/5/18	1:00 PM	8	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.
55T
72	6/4/18	Webster	8054	NAWC	6/7/18	1:00 PM	4	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.
55T
73	6/5/18	PAX	1461	NAWC	6/20/18	1:00 PM	16	Crane shall lift load off a lowboy trailer parked adjacent to side of building using {4) lift points on top of chamber and (2) on backside. Staging of crane shall be in driveway at overhead door#lO. Previous lift used slings combined fro lift with two being longer then other slings due to side lift points. 2) Load lift to 30 feet and booom toward building about 30 feet and place chamber on tank skates on metal road plates near door #10. Chamber to face toward building for forklift to pick load using support braces installed by manufacture.	65T
74	6/6/18	Webster	8054	NAWC	6/14/18	1:00 PM	9	The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
75	6/8/18	PAX	144	NAWC	6/22/18	1:00 PM	15	The F-35 aircraft is currently sitting on 32" high blocks and will need to be placed back on the floor.	65T
76	6/11/18	Webster	8271	NAWC	6/14/18	8:00 AM	4	lift an AN/SPN-43C Antenna reflector from the 23-foot tower to the ground and lift an Antenna reflector from the ground to the 23-foot tower. The tower location is between buildings 8271 and 8144 on Webster Field. 43C Antenna reflector is 5 ft. by 7 ft. and weighs 350 Lbs	55T
77	6/14/18	PAX	2197	NAWC	6/26/18	8:00 AM	13	This is a single crane lift request for the removal and reinstallation of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model. Once the device is removed from the F-18 model work must be done to reconfigure it, should take 2 hours or less. Then the reconfigured test device needs to be reinstalled in the same location on the F-18 model.	55T
78	6/15/18	PAX	144	NAWC	6/28/18	1:00 PM	14	The F-35 aircraft is currently sitting on 32" high blocks and will need to be placed back on the floor.	65T
79	6/18/18	Webster	8054	NAWC	7/2/18	1:00 PM	15	300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high will be installed on tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
80	6/15/18	PAX	2197 (FARM)	NAWC	7/10/18	8:00 AM	26	This is a single crane lift request for the removal and reinstallation of test devices approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model. Task is to remove one pod and install a similar pod on the centerline of the F-18 model	55T
81	6/15/18	Webster	8054	NAWC	6/25/18	8:00 AM	11	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be taken off of tower 8054. The 300 lb SPN-43 with feed on it is 120 inches wide by 72 inches high will be installed on tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
82	6/21/18	Webster	8271	NAWC	7/17/18	8:00 AM	27	Tower located between 8271 and 8144 Overhead obstruction: No Detailed description

of lift: AN/SPN-43C antenna pedestal needs to be lifted from a 23 foot tower to the ground and replaced with a different pedestal to the 23 foot tower.

	55T
	83	7/9/18	PAX	FARM 2197	NAWC	7/17/18	8:00 AM	9	This is a single crane lift request for the removal and reinstallation of test devices approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model. Task is to remove one pod and install a similar pod on the centerline of the F-18 model.	55T
	84	7/13/18	PAX	FARM 2197	NAWC	7/24/18	8:00 AM	12	This is a single crane lift request for the removal and reinstallation of test devices approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model. Task is to remove one pod and install a similar pod on the centerline of the F-18 model.	55T
	85	7/13/18	Webster	8054	NAWC	7/25/18	1:00 PM	13	: Tower 8054 Overhead obstruction: no Detailed description of lift: The 150 lb SPN-46 with feed on it and will be removed from the tower 8054. The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be installed on the tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower	Cancelled - Charged Lift
	86	7/19/18	PAX	1591	NAWC	8/14/18	8:00 AM	27	Replace old Antenna Pedestal, replace with new	55T
	87	7/19/18	PAX	101	NAWC	8/15/18	8:00 AM	28	Replace old Antenna Pedestal, replace with new	55T
	88	7/19/18	PAX	101	NAWC	8/15/18	8:00 AM	28	Replace old Antenna Pedestal, replace with new	55T
	89	7/27/18	PAX	FARM 2197	NAWC	8/1/18	8:00 AM	6	This is a single crane lift request for the removal of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model. The request is to have the crane lift the device, the FARM crew will spin it 180 degrees, then reinstall in the same location on the F-18 model	55T
	90	8/1/18	PAX	2905A	NAWC	8/13/18	1:00 PM	13	Three block approximately 32" high will be strategically positioned in the hangar to match the MQ-4C Triton landing gear. The MQ-4C Triton will then be hoisted and positioned on the blocks.	65T
	91	8/1/18	PAX	FARM 2197	NAWC	8/7/18	8:00 AM	7	This is a single crane lift request for the removal of a test device approximately the same size as an aircraft fuel cell. Device is currently mounted on the centerline station of the FARM F-18 model	55T
	92	8/2/18	Pax	2187	NAWC	8/7/18	8:00 AM	6	Move Connex box off of ramp to building 90 deg to the grass area next to ramp.	55T
	93	8/8/18	PAX	1591	NAWC	8/21/18	8:00 AM	14	Replace old Antenna Pedestal, replace with new	55T
	94	8/8/18	PAX	101	NAWC	8/22/18	8:00 AM	15	Replace old Antenna Pedestal, replace with new	55T
	95	8/9/18	PAX	2905A	NAWC	8/15/18	1:00 PM	7	Three block approximately 32" high will be strategically positioned in the hangar to match the MQ-4C Triton landing gear. The MQ-4C Triton will then be hoisted and positioned on the blocks.	65T
	96	8/10/18	Webster	8165	NAWC	9/5/18	8:00 AM	27	We need to remove OE570 antennas (2 total) from the roof of 8165 and install OE570 antennas (2 total). 4 of the antennas are pedestal style (approx. 650lbs)	55T
	97	8/14/18	Webster	8054	NAWC	8/27/18	1:00 PM	14	: Tower 8054 Overhead obstruction: no Detailed description of lift: The 150 lb SPN-46 with feed on it and will be removed from the tower 8054. The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be installed on the tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower	55T
	98	8/14/18	PAX	1370	NAWC	8/24/18	10:00 AM	11	Install a Flag Pole at Quaterdeck	55T
	99	8/20/18	PAX	FARM 2197	NAWC	9/4/18	8:00 AM	16	This is a single crane lift request for work at two locations, same building. First, the removal of a lattice tower, a medium size positioner, and a large mounting fixture from the rooftop of building 2193. Second Lift, at the 1500’ TX pad for building 2193 install a squint unit on top of the tower.	55T
	100	8/20/18	PAX	FARM 2197	NAWC	9/4/18	8:00 AM	16	This is a single crane lift request for work at two locations, same building. First, the removal of a lattice tower, a medium size positioner, and a large mounting fixture from the rooftop of building 2193. Second, at the 1500’ TX pad for building 2193 install a squint unit on top of the tower.	55T
	101	8/21/18	PAX	FARM 2197	NAWC	9/18/18	8:00 AM	29	This is a lift and flip effort to remove the F-18 model from the bldg 2197 tower and place it on the ground. In placing the model on the ground the model’s lower wheel assembly and forward wheel assembly must be installed (the model will not go back on the stands).	55T
	102	8/21/18	PAX	FARM 2197	NAWC	9/18/18	8:00 AM	29	This is a lift and flip effort to remove the F-18 model from the bldg 2197 tower and place it on the ground. In placing the model on the ground the model’s lower wheel assembly and forward wheel assembly must be installed (the model will not go back on the stands).	55T
	103	8/21/18	PAX	FARM 2197	NAWC	9/18/18	8:00 AM	29	Move Items from FARM to DRMO Off Load	55T
	104	8/28/18	Webster	8054	NAWC	9/4/18	1:00 PM	8	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be installed on the tower	55T
	105	8/21/18	PAX	FARM 2197	NAWC	9/18/18	8:00 AM	29	This is a lift and flip effort to remove the F-18 model from the bldg 2197 tower and place it on the ground. In placing the model on the ground the model’s lower wheel assembly and forward wheel assembly must be installed (the model will not go back on the stands).	65T
	106	8/21/18	PAX	FARM 2197	NAWC	9/18/18	8:00 AM	29	This is a lift and flip effort to remove the F-18 model from the bldg 2197 tower and place it on the ground. In placing the model on the ground the model’s lower wheel assembly and forward wheel assembly must be installed (the model will not go back on the stands).	55T
	107	8/21/18	PAX	FARM 2197	NAWC	9/18/18	8:00 AM	29	Move Items from FARM to DRMO Off Load	55T
	108	8/31/18	PAX	FARM 2197	NAWC	9/18/18	8:00 AM	19	This is a single crane lift request for work at two locations, same building. First, the removal of a lattice tower, a medium size positioner, and a large mounting fixture from the rooftop of building 2193. Second, at the 1500’ TX pad for building 2193 install a squint unit on top of the tower.	55T
	109	8/31/18	PAX	FARM 2197	NAWC	9/18/18	8:00 AM	19	Second, at the 1500’ TX pad for building 2193 install a squint unit on top of the tower.	55T
	110	9/14/18	PAX	2905	NAWC	9/24/18	8:00 AM	11	Remove the MQ-4C Triton from the 32" high isolation blocks.	65T
	111	9/14/18	PAX	Emory Rd	NAWC	9/26/18	7:30 AM	13	Each trailer will need to be lifted by crane onto a low boy trailer supplied by DLA transportation from Fort Meade	65T
	112	9/16/18	PAX	FARM 2197	NAWC	9/24/18	8:00 AM	9	This is three efforts, same building. The first effort is to move the F-18C model from the 2194 1000’ pad location and move it and the model stands to the parking area in front of Bldg 3199, at the FARM. The F-18C model is currently on stands. To move the model a flatbed truck is needed and one crane. The crane lifts the model, the stands are forklifted onto the flatbed, and the model is then placed on the stands, strapped down, and moved.	55T
	113	9/16/18	PAX	FARM 2197	NAWC	9/24/18	8:00 AM	9	The second effort is to lift a short tower from the cart at bldg. 2194, place it on the flatbed, and transport it to the 2194 1000’ pad. Once at the 2194 1000’ pad the crane needs to place the tower in a spot, FARM personnel mark the pad. The crane then lifts and swings the tower away enough to allow the FARM crew to drill holes, then the tower is placed on the pad and bolted down. Last item is the installation of a small positioner onto the top of the short tower. The third effort, which can be done at the same time the short tower is removed from the cart, is to install a 53230 positioner onto the rooftop of bldg. 2194.	55T
	114	9/19/18	Webster	8054	NAWC	9/25/18	1:00 PM	7	Detailed description of lift: The 150 lb SPN-46 with feed on it and will be removed from the tower 8054. The 300 lb
SPN-43 with feed on it is 120 inches wide by 72 inches high will be installed on tower 8054	55T
	115	9/25/18	Webster	8054	NAWC	9/28/18	1:00 PM	4	request a lift at the range for Friday 9/28 at 1300 or the next available lift, to remove a SPN-43 and install a SPN-46.	55T

Lift Ticket No.	Date Received from PW	Locataion	Building or Area	NAWC/NDW	Date Requested	Time Requested	# Days Advance Notice	Description	Type of Crane Used
1	10/4/18	Webster	8054	NAWC	10/15/18	10:00 AM	12	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be installed on the tower 8054.	55T
2	10/12/18	Webster	8054	NAWC	10/19/18	8:00 AM	8	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be installed on the tower 8054. All personnel working rigging aloft shall have required fall protection, an anchor point provided by a trained competent person is provided for fall prevention on the tower. Base air operations must be informed of lift activity and no lifting to be done until cleared through ATC.	55T
3	10/12/18	Webster	8054	NAWC	10/22/18	1:00 PM	11	The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be installed on the tower 8054.	55T
4	10/12/18	Webster	8165	NAWC	11/7/18	8:00 AM	27	1 Lift height (feet): 40 Lift weight (pounds): Up to 650 lbs Lift locations (specify if multiple sites): 8165 Overhead obstruction: None Detailed description of lift: We need to remove OE570 antennas (2 total) from the roof of 8165 and install OE570 antennas (2 total). Remove and install 4 EHF antennas.	55T
5	10/12/18	Webster	8165	NAWC	11/8/18	8:00 AM	28	1 Lift height (feet): 40 Lift weight (pounds): Up to 650 lbs Lift locations (specify if multiple sites): 8165 Overhead obstruction: None Detailed description of lift: We need to remove OE570 antennas (2 total) from the roof of 8165 and install OE570 antennas (2 total). Remove and install 4 EHF antennas. _RAIN DATE	55T
6	10/19/18	Webster	8054	NAWC	10/26/18	1:00 AM	8	The 150 lb SPN-46 with feed on it and will be removed from the tower 8054. The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be installed on the tower 8054.	55T
7	10/19/18	Webster	8271	NAWC	11/14/18	8:00 AM	27	AN/SPN-43C antenna pedestal needs to be lifted from a 23 foot tower to the ground and replaced with a different pedestal to the 23 foot tower.	55T
8	10/23/18	PAX	2100 (EMP)	NAWC	12/4/18	8:30 AM	43	EMP Tower MX (DAY 1)	65T
9	10/24/18	PAX	2100 (EMP)	NAWC	12/5/18	8:30 AM	43	EMP Tower MX (DAY 2)	65T
10	10/30/18	PAX	1703 (ATR)	NAWC	11/6/18	9:00 AM	8	Antenna twin-tower structure needs repaired, therefore the lift is as follows: 1. Remove horizontal HF antenna and set on the ground. 2. Lay down center mast of antenna.3. Lay down first twin-tower. 4. Lay down second twin-tower.	65T
11	10/30/18	PAX	1703 (ATR)	NAWC	11/8/18	9:00 AM	10	Antenna twin-tower structure needs repaired, therefore the lift is as follows: 1. Remove horizontal HF antenna and set on the ground. 2. Lay down center mast of antenna.3. Lay down first twin-tower. 4. Lay down second twin-tower.	65T
12	11/5/18	PAX	1703 (ATR)	NAWC	11/19/18	8:00 AM	15	On second lift day: 5. Erect first twin-tower. 6. Erect second twin-tower.7. Erect antenna mast. 8. Lift HF antenna and place on top of antenna mast.	65T
13	11/7/18	Webster	8054	NAWC	11/14/18	10:00 AM	8	Remove SPN-46 and Install SPN-43	55T
14	10/24/18	PAX	2100 (EMP)	NAWC	12/6/18	8:30 AM	44	BACKUP DATE EMP SITE (CUSTOMER IS AWARE OF CHARGEABLE DATE) Coincides with Lift #8 and #9	65T
15	11/13/18	Webster	8054	NAWC	11/20/18	1:00 PM	8	The 150 lb SPN-46 with feed on it and will be removed from the tower 8054. The 1500 lb, 12 foot diameter, OE-120 antenna that is bolted to the tower positioner will be installed on the tower 8054.	55T
16	11/13/18	PAX	FARM	NAWC	11/28/18	8:00 AM	16	This effort is to install a small positioner on top of a short tower.	55T
17	11/13/18	PAX	FARM	NAWC	11/28/18	8:00 AM	16	This is for two efforts at Bldg 2193. First effort is to remove the top portion of the tower and place it on the ground. The tower will need to be cut once the crane is attached to it. The second effort is to place a plate on top of the positioner at Bldg 2193.	55T

Summary

Counts	2017-2018	2018	Total
55T	93	11	104
65T	17	6	23
Cancelled - Charged Lift	5	0	5
Totals	115	17	132

File details come from the government source that posted it. Updated Jan 7, 2020.