N3904027Q1002 Attachment 2 A001 - Unit Specification Checklist.pdf

This document is a Unit Specification for procurement of a single Telehandler (Unit 1) that must meet detailed equipment requirements.

The telehandler must be an internal combustion-powered machine no older than 5 years, with a minimum capacity of 4,000 pounds on stabilizers/outriggers at 35 feet elevation and 25 feet horizontal reach. The machine shall not exceed 22 feet in stowed length (carriage to rear) and 13 feet in width with stabilizers deployed. Forks must have a maximum width of 6 inches and thickness of 2.5 inches, with a minimum length of 48 inches (60 inches preferred). The unit requires foam-filled, solid pneumatic, shaped solid, or equivalent tires that do not require air and can sustain puncture without loss of integrity. The enclosed cab must include heat, air conditioning, and an operator cooling fan. Preferred features include a hydraulic side-shift carriage and hydraulic fork positioners. The telehandler must be equipped with integral lifting attachment points for crane lifting using a standard 4-legged sling with provided lifting instructions, front and rear working lights, an audible backup alarm, a manufacturer's capacity load chart showing safe working loads throughout the boom reach arc (including operations with and without stabilizers deployed), clearly marked operator controls, and an operator's manual housed in the machine. A compliance checklist with "Yes" and "No" columns is provided for evaluation purposes.