ATT_8_UAV_Group_1-4_DD_254.pdf

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

1. CLEARANCE AND SAFEGUARDING

a. FACILITY CLEARANCE REQUIRED

(The requirements of the DoD National Industrial Security Program Operating Manual b. LEVEL OF SAFEGUARDING REQUIRED apply to all security aspects of this effort.)

2. THIS SPECIFICATION IS FOR: (X and complete as applicable) 3. THIS SPECIFICATION IS: (X and complete as applicable)

a. PRIME CONTRACT NUMBER a. ORIGINAL (Complete date in all cases) DATE (YYYYMMDD)

b. SUBCONTRACT NUMBER b. REVISED (Supersedes all previous specs) Revision Number DATE (YYYYMMDD)

c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD) c. FINAL (Complete Item 5 in all cases) DATE (YYYYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? YES NO. If YES, complete the following:

Classified material received or generated under ________________________________ (preceding contract number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? YES NO. If YES, complete the following:

In response to the contractor's request dated retention of the identified classified material is authorized for the period of .

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

7. SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

8. ACTUAL PERFORMANCE

a. LOCATION b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

10.THIS CONTRACT WILL REQUIRE ACCESS TO: YES NO 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: YES NO

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER

CONTRACTOR'S FACILITY OR A GOVERNMENT ACTIVITY

b. RESTRICTED DATA b. RECEIVE CLASSIFIED DOCUMENTS ONLY

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION c. RECEIVE AND GENERATE CLASSIFIED MATERIAL

d. FORMERLY RESTRICTED DATA d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. INTELLIGENCE INFORMATION: e. PERFORM SERVICES ONLY

(1) SENSITIVE COMPARTMENT INFORMATION (SCI) f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO

RICO, U.S. POSSESSIONS AND TRUST TERRITORIES

(2) NON-SCI g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL

INFORMATION CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER

f. SPECIAL ACCESS INFORMATION h. REQUIRE A COMSEC ACCOUNT

g. NATO INFORMATION i. HAVE TEMPEST REQUIREMENTS

h. FOREIGN GOVERNMENT INFORMATION j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

i. LIMITED DISSEMINATION INFORMATION k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE

j. FOR OFFICIAL USE ONLY INFORMATION l. OTHER (Specify).

k. OTHER (Specify) initiator:amanda.merritt@imagine-one.com;wfState:distributed;wfType:email;workflowId:571b3fd22d8e144b8831991190d31ea9

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except a provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. government authority. Proposed public releases shall be submitted for approval prior to release Direct Through (Specify):

to the Directorate for Freedom of Information and Security Review, Office of the Assistant Security of Defense (Public Affairs)* for review.

*In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.

13. SECURITY GUIDANCE. The security classification guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to NISPOM requirements, are established for this contract. (If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements.

Provide a copy of the requirements to the cognizant security office. Use item 13 if additional space is needed.) YES NO

15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office. (If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspectors. Use item 13 if additional space is needed.) YES NO

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

a. TYPED NAME OF CERTIFYING OFFICIAL b. TITLE c. TELEPHONE (Include Area Code)

d. ADDRESS (Include Zip Code) 17. REQUIRED DISTRIBUTION

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

e. SIGNATURE e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHERS AS NECESSARY carol.graham Typewritten Text carol.graham Typewritten Text carol.graham Typewritten Text 10e (2) - Access to Intelligence information required for performance. Non-SCI Intelligence Information is not releasable to contractor employees who have not received a final security clearance at the appropriate level. Contractor shall comply with Naval Air Warfare Center Aircraft Division Scientific and Technical Intelligence Liaison Officer Memo of 03 MAR 09 (attached). Reviewed by: ______________________________________________ Senior Intelligence Officer, Stephen Hendricks carol.graham Typewritten Text carol.graham Typewritten Text

SUPPLEMENTAL SHEET FOR

Blank Page

COR: Cynthia Henderson, cynthia.henderson@navy.mil a TYPED NAME OF CERTIFYING OFFICIAL: David G. Ince Sr FOR:

Karen L. Abell

Submit ALL Public Releases to: Program Executive Office (Unmanned Aviation and Strike Weapons), PMA 266/PMA263, 22707 Cedar Point Road, Building 3261 Patuxent River, Maryland 20670. NAVAIR FORM 5720/1 must be completed and attached NAVAIR FORM 5720/1 must be completed and attached Text2:

Technical papers, briefings, presentations, either classified or unclassified to be presented at classified symposia shall be submitted for approval prior to presentation.

Determination of need-to-know in connection with a classified visit is the responsibility of the individual/host who will disclose the classified information.

Block 2.c: PMT PID# N00421-16-RFP-511000-D-0171

Block 10.a: Classified COMSEC material is not releasable to contractor employees who have not received a final security clearance at the appropriate level. Cryptologic keying materials and Controlled Cryptographic Items (CCI) are controlled by Department of the Navy, NISPOM, and National Security Agency (NSA) guidelines. The contractor shall be guided by NSA/CSS Policy Manual 3-16 in the control and protection of COMSEC material/information at their facilities. When access is required at Government facilities, contractor personnel will adhere to COMSEC rules and regulations as mandated by DoD 5520.22-M, EKMS 1 (series) and Command policy and procedures. Written concurrence of the Technical Point of Contact/Contracting Officer Representative/Contracting Officer Security Representative (as applicable) is required prior to subcontracting.

Block 10.j: For Official Use Only information generated and/or provided under this contract shall be marked and safeguarded as specified in DoDM 5200.01 (DoD Information Security Program: Controlled Unclassified Information (CUI)) Vol. 4 (enclosure 3 pages 11-18) available at http://www.dtic.mil/whs/directives/corres/pdf/520001_vol4.pdf and DoD 5400.7-R, Freedom of Information Program Chapter 3 (pages 31-42) available at http://www.dtic.mil/whs/directives/corres/pdf/540007r.pdf

Block 11.a: All classified information/material shall be provided by the contractor facility or Government Contracting Activity (GCA) and safeguarded at the approved actual performance site.

Block 11.g: The contractor is authorized to use DTIC and shall prepare and process DD Form 1540, DD Form 2345, and/or DD Form 55 through the COSR, prior to requesting these services.

Text3: 47561 Ranch Road Patuxent River, MD 20670

Block 11.j The Contractor shall develop, implement, and maintain an OPSEC program to protect controlled unclassified and classified activities, information, equipment, and material used or developed by the Contractor and any Subcontractor during performance of the contract. The Contractor shall be responsible for the Subcontractor implementation of the OPSEC requirements. The OPSEC program shall at a minimum include:

1. Assignment of responsibility for OPSEC direction and implementation.

2. Issuance of procedures and planning guidance for the use of OPSEC techniques to identify vulnerabilities and apply applicable countermeasures.

3. Establishment of OPSEC education and awareness training program meeting DOD requirements.

4. Provisions for management, annual review, and evaluation of OPSEC programs.

5. Flow down of OPSEC requirements to subcontractors when applicable.

The Contractor shall maintain an effective OPSEC program that implements countermeasures to protect critical information (CI) and other sensitive unclassified information and activities, especially those activities or information which could compromise classified information or operations, or degrade the planning and execution of military operations performed or supported by the contractor in support of the mission. While performing aboard NAVAIR or NAVAIR sites, the contractor shall comply with the provisions of OPNAVINST 3432.1A, the local Command/Facility OPSEC policies, as well as any procedures identified in Program-Specific Operations Security Plans, and Program Protection Plans (PPP) as applicable. While performing at contractor facilities, a facility-level OPSEC program shall be utilized to ensure proper safeguarding of all controlled unclassified and classified information developed in performance of this contract.

The following Security Classification Guide(s) apply to classified performance on this contract. Subsequent updates shall be provided by the Technical Point of Contact/Contracting Officer Representative/Contracting Officer Security Representative (as applicable) as Government Furnished Information (GFI) and shall be executed by the Contractor without obligation to modify this DD Form 254.

-SCG ID# 02-307 MQ-8 Fire Scout dated 9 Dec 2015 (and subsequent revisions) -U.S. Army Family of Small Unmanned Aircraft Systems (SUAS), dated 30 Sept 2010 (and any subsequent revisions).

-SCG ID#02-277.2, Small Tactical Unmanned Aircraft System (STUAS) RQ-21A dated 6 Sept 2016 (and any subsequent revisions).

-U.S. Army Shadow 200 Tactical Unmanned Aircraft system (UAS) dated 17 May 2011 (and any subsequent revisions) -Anti-Tamper Security Classification Guide, dated 17 March 2010 including Change 1 & 2 (or subsequent revisions)