N0025321Q0073 A0005.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to answ er vendor questions.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 17-Mar-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0025321Q0073

X 9B. DATED (SEE ITEM 11)

05-Mar-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

17-Mar-2021

CODE

NAVAL UNDERSEA WARFARE CENTER

ATTN: MURRAY LANCASTER

MURRAY.LANCASTER@NAVY.MIL

610 DOWELL ST, BLDG 206

KEYPORT WA 98345

N00253 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0025321Q0073

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been added by full text:

VENDOR QUESTIONS AND ANSWERS

I wanted to confirm with you that the cabinets and the drawings are expected to be picked up…not just the drawings themselves.

Yes, cabinets and drawings.

Also, do the quantities below represent the number of cabinets that would need to be picked up? Yes.

QUANTITY DESCRIPTION SIZE

54 DRAWING FLATFILE, LARGE 53.5"W x 42"D x 17"H

22 DRAWING FLATFILE, SMALL 40"W X 28"D X 17"H

78 DRAWING TUBEFILE 15"W X 43"D X 15"H

7 DRAWING FLATFILE, LARGE 47"W X 36"D X 16"H

4 DRAWING FLATFILE, SMALL 40"W X 28"D X 58H"

2 DRAWING FLATFILE, LARGE 45.5"W X 34"D X 17.5"H

2 DRAWING FLATFILE, LARGE 43"W X 33"D X 36"H

4 DRAWING FLATFILE, SMALL 40"W X 28"D X 40"H

6 DRAWING FLATFILE, MEDIUM 47.5"W X 36.5"D X 17"H

12 DRAWING FLATFILE, LARGE 54"W X 42.5"D X 15.5"H

11 DRAWING FLATFILE, MEDIUM 47"W X 28" D X 16"H

14 LETTER FILE CABINETS 15"W X 22"D X 52"H

For office space estimates, I am assuming that all of the cabinets labeled "Drawing Flatfile" can be stacked, at least 3 high? Are those labeled "Drawing Tubefile" also stackable, and if so, at least 3 high also?

Yes they can be stacked 3 high, some 4 high. The Drawing tubefiles we currently do not stack but they should be stackable, 2 – 3 high.

In Amendment #3, can you clarify the dimensions of "o. J size= 34 x 143HI"? Typo should read 34” x 143”

Where are all the cabinets located for pick up? On base? Ground floor for easy access? Do drivers/movers who will load and haul away the cabinets need special military base licensing or clearance?

All the cabinets are located at Keyport, WA on base, building 206. Ground floor. Drivers/Movers will need to request base access through the BAVR (Base Access Visitor Request website). Upon arrival at the Visitor Control Center, personnel will need to provide an I.D. card (i.e. drivers license) and proof of citizenship (enhanced drivers license, certified birth certificate, passport, or green card).

Could we visit the site location to see the actual size of the file cabinets to be relocated to our facility for further processing?

N0025321Q0073

If you google flat file cabinets you can get a pretty good idea, along with the above dimensions. A picture of a flatfile and a tubefile will be included as an attachment in betaSAM.

go

(End of Summary of Changes)