N00024-19-R-5601.doc

Section B - Supplies or Services and Prices

CLIN Number 0001

Unit

Console Display and Peripheral Equipment

FFP

Water Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes C, D, I

FOB: Origin (Shipping Point)

PURCHASE REQUEST NUMBER: N0002418NR41254

PSC CD: 1220

NET AMT

CLIN Number 0002

Unit

Console Display and Peripheral Equipment

Air Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 0003

Unit

Console Display and Peripheral Equipment

Air Cooled Common Display System (CDS) Console

Shock Isolator 8Hz

See Notes C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 0004

Unit

Tactical Equivalent OJ-845(V)

See Notes E, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 0005

Unit

Display and Peripheral Equipment

See Notes F, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 0006

Unit

First Article Requirement

Water Cooled CDS Console (14-35 Hz)

Requires purchase of hardware under CLINs 0001, (1001, 2001, 3001, 4001, if the option is exercised after the base year).

See Notes: I, J

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 0007

Unit

First Article Requirement

Air Cooled CDS Console (14-35 Hz)

Requires purchase of hardware under CLINs 0002, (1002, 2002, 3002, 4002, if the option is exercised after the base year).

See Notes: I, J

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 0008

Unit

First Article Requirement

Air Cooled CDS Console (8 Hz)

Requires purchase of hardware under CLINs 0003, (1003, 2003, 3003, 4003, if the option is exercised after the base year).

See Notes: I, J

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 0009

Lot

Production Readiness Review (PRR)

See Notes: I, J

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 0010

Each

Country of Origin Study

See Notes: B, I, J

FOB: Origin (Shipping Point)

PSC CD: K012

NET AMT

CLIN Number 0100

Lot

Spares

See Notes G, I

FOB: Destination

NET AMT

CLIN Number 0200

Engineering Services

CPFF

See Notes H, I, K

FOB: Destination

ESTIMATED COST

FIXED FEE

TOTAL EST COST + FEE

CLIN Number 0300

ODC & Incidental Materials

COST

ODC & Incidental Materials in support of Engineering Services (CLIN 0200)

(Government Estimated Value: $125,000)

See Notes H, I

FOB: Destination

ESTIMATED COST

CLIN Number 0400

CDRLs (Exhibit A, B, and C)

NSP

See Note A

FOB: Destination

NET AMT

CLIN Number 1001

Unit

FFP

Water Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 1002

Unit

FFP

Air Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 1003

Unit

FFP

Air Cooled Common Display System (CDS) Console

Shock Isolator 8Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 1004

Unit

FFP

See Notes B, E, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 1005

Unit

FFP

See Notes B, F, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 1100

Lot

FFP

See Notes B, G, I

FOB: Destination

NET AMT

CLIN Number 1200

CPFF

See Notes B, H, I, K

FOB: Destination

NET AMT

CLIN Number 1300

COST

ODC & Incidental Materials in support of Engineering Services (CLIN 1200)

(Government Estimated Value: $125,000)

See Notes B, H, I

FOB: Destination

NET AMT

CLIN Number 2001

Unit

FFP

Water Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 2002

Unit

FFP

Air Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 2003

Unit

FFP

Air Cooled Common Display System (CDS) Console

Shock Isolator 8Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 2004

Unit

FFP

See Notes B, E, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 2005

Unit

FFP

See Notes B, F, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 2100

Lot

FFP

See Notes B, G, I

FOB: Destination

NET AMT

CLIN Number 2200

CPFF

See Notes B, H, I, K

FOB: Destination

NET AMT

CLIN Number 2300

COST

ODC & Incidental Materials in support of Engineering Services (CLIN 2200)

(Government Estimated Value: $125,000)

See Notes B, H, I

FOB: Destination

ESTIMATED COST

CLIN Number 3001

Unit

FFP

Water Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 3002

Unit

FFP

Air Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 3003

Unit

FFP

Air Cooled Common Display System (CDS) Console

Shock Isolator 8Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 3004

Unit

FFP

See Notes B, E, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 3005

Unit

FFP

See Notes B, F, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 3100

Lot

FFP

See Notes B, G, I

FOB: Destination

NET AMT

CLIN Number 3200

CPFF

See Notes B, H, I, K

FOB: Destination

NET AMT

CLIN Number 3300

COST

ODC & Incidental Materials in support of Engineering Services (CLIN 3200)

(Government Estimated Value: $125,000)

See Notes B, H, I

FOB: Destination

NET AMT

CLIN Number 4001

Unit

FFP

Water Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 4002

Unit

FFP

Air Cooled Common Display System (CDS) Console

Shock Isolator 14-35Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 4003

Unit

FFP

Air Cooled Common Display System (CDS) Console

Shock Isolator 8Hz

See Notes B, C, D, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 4004

Unit

FFP

See Notes B, E, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 4005

Unit

FFP

See Notes B, F, I

FOB: Origin (Shipping Point)

NET AMT

CLIN Number 4100

Lot

FFP

See Notes B, G, I

FOB: Destination

NET AMT

CLIN Number 4200

CPFF

See Notes B, H, I, K

FOB: Destination

NET AMT

CLIN Number 4300

COST

ODC & Incidental Materials in support of Engineering Services (CLIN 4200)

(Government Estimated Value: $125,000)

See Notes B, H, I

FOB: Destination

NET AMT

CLIN Number 5000

Provisioned Items Order (PIO)

See Notes I, L

FOB: Destination

NET AMT

NOTE A

NOTE A – Contract Data Requirements List (CDRLs) to be delivered under CLIN 0400 are Not Separately Priced.

NOTE B

NOTE B – Option item to which the option clause in Section I applies and which is to be supplied only if, and to the extent, said option is exercised.

NOTE C

NOTE C – The tables below establish stepladder pricing for base contract line items (CLINs) 0001-0003, and if Option CLINs are exercised; 1001-1003, 2001-2003, 3001-3003, and 4001-4003. The respective Section B amounts under each CLIN shall be established through unilateral modification in accordance with Section I clause 52.217-7 and the stepladder pricing in tables 1, 2 and 3 below. Once exercised, the Government retains the right to unilaterally increase the quantity procured under any of these line items as long as it occurs before the latest option exercise date stated under FAR 52.217-7. If this quantity increase occurs within a 60-day period of other quantities procured under any of these CLINs, then pricing for all hardware under these line items procured within this 60-day period shall be adjusted to the unit price from the stepladder pricing appropriate for the total quantity being procured, regardless of the configuration and individual quantity per CLIN being procured. The Government shall retain the unilateral right to amend the previously issued contract modifications at the final quantity price within any 60-day period. The Section B Firm Fixed Price (FFP) amount and the funding provided in each modification issued shall be unilaterally established utilizing the stepladder pricing detailed in the tables below and as found in Note D (Configuration/Options). For quantity increases not occurring within a 60-day period of when other quantities are exercised under the line item, the Government will use the unit pricing from the stepladder pricing applicable to the quantity of hardware being added and the pricing of previous quantities under said line item shall not change.

For funding and administrative purposes, at the time of option exercise and any quantity purchase increases, the Contracting Officer may unilaterally establish separately priced CLINs or subcontract line items (SLINs) for the items to be procured. The final unit price will be based on the total number of Console units, regardless of configuration, purchased within that 60-day timeframe. The Government retains the unilateral right to amend any previously issued modifications to adjust the final unit price procured during a given 60-day period.

Example: If a modification includes three consoles from CLIN 0001, two consoles from CLIN 0002, and two consoles from CLIN 0003 then each console will be priced at the unit prices listed in the row of the unit price table corresponding to a cumulative quantity of seven units (3 + 2 + 2 = 7). The Government retains the unilateral right to amend issued modifications to the final unit price procured during a given 60-day period.

Note C - Table 1

Water Cooled CDS (14-35Hz) - Console Stepladder Unit Price Table (Price Per Unit)

Note C - Table 2

Air Cooled CDS (14-35Hz) - Console Stepladder Unit Price Table (Price Per Unit)

Note C - Table 3

Air Cooled CDS (8Hz) - Console Stepladder Unit Price Table (Price Per Unit)

NOTE D

NOTE D- Stepladder pricing for configuration and HMI options for incorporation under CDP hardware base contract line items (CLINs) 0001-0003, and if Option CLINs are exercised 1001-1003, 2001-2003, 3001-3003, and 4001-4003 shall be established at contract award and detailed in the tables below. The Section B amounts in the tables below shall be established and funded through unilateral modification in accordance with Section I clause 52.217-7 and the stepladder pricing detailed in the tables below. During contract execution, the pricing detailed in the tables below will be combined with the pricing established in Note C of Section B to provide the fully integrated console price under CLINs 0001-0003, 1001-1003, 2001-2003, 3001-3003 and 4001-4003. The Government will detail the specific Configuration / HMI Option item description within the respective SLIN extended description in Section B at time of modification award, providing direction to the contractor for which Configuration/HMI Option to incorporate with the console variant being procured.

The Government may procure any selection of the items identified in the tables below. Furthermore, the Government retains the right to unilaterally increase the quantity procured for each of the specific configurations and HMI options identified in the tables below (base CLINs 0001-0003 and if options are exercised; 1001-1003, 2001-2003, 3001-3003 and 4001-4003) as long as it occurs before the latest option exercise date stated under Section I clause 52.217-7. If a quantity increase for a specific configuration and HMI option occurs within a 60-day period of other quantities procured for that speciifc configuration and HMI option, then pricing for the total quantity procured for that specific configuration and HMI option within this 60-day period shall be adjusted to the unit price from the stepladder pricing tables below for the total quantity procured of that item. Conversely, for any quantity increases of a specific configuration and HMI option not occurring within a 60-day period, the Government will utilize the unit pricing from the stepladder pricing tables below applicable to the quantity of each specific configuration and HMI option and the pricing of previous quantities procured of each specific configuration and HMI option shall not change.

For funding and administrative purposes, at the time of option exercise and quantity purchase increases, the Contracting Officer may unilaterally establish separately priced contract line items (CLINs) or subcontract line items (SLINs) to procure items under Note D. The Section B Firm Fixed Price (FFP) amount and the funding provided in each modification shall be unilaterally established based on the stepladder pricing in the tables below. Therefore, the final unit price of any specific item will be based on the total number of units procured for that item within that 60-day timeframe. The Government will retain the unilateral right to amend issued modifications at the final unit price.

Note D - Table 1

Configuration & HMI Options (to be incorporated under CLINS 0001 – 0003)

Note D - Table 2

Configuration & HMI Options (to be incorporated under CLINS 1001 – 1003)

Note D - Table 3

Configuration & HMI Options (to be incorporated under CLINS 2001 – 2003)

Note D - Table 4

Configuration & HMI Options (to be incorporated under CLINS 3001 – 3003)

Note D - Table 5

Configuration & HMI Options (to be incorporated under CLINS 4001 – 4003)

NOTE E

NOTE E – The table below establishes stepladder pricing for base CLIN 0004, and if Options are exercised; 1004, 2004, 3004 and 4004. The Section B amounts shall be established through unilateral modification in accordance with Section I clause 52.217-7 and the stepladder pricing in the table below. Furthermore, the Government retains the right to unilaterally increase the quantity procured under any of these line items after they have been initially exercised as long as it occurs before the latest option exercise date stated under FAR 52.217-7. If this quantity increase occurs within a 60-day period of other quantities procured under these line items, then pricing for all hardware under these line items procured within this 60-day period shall be adjusted to the unit price from the stepladder pricing appropriate for the total quantity being procured. For quantity increases not occurring within a 60-day period of when other quantities are procured under these line items, the Government will use unit pricing from the stepladder pricing applicable to the immediate quantity of hardware being procured and the pricing of previous quantities under said line items shall not change. For funding and administrative purposes, at the time of option exercise and quantity purchase increases, the Contracting Officer may unilaterally establish separately priced contract line items (CLINs) or subcontract line items (SLINs) for the items to be procured. The Section B Firm Fixed Price (FFP) amount and the funding provided in each modification shall be unilaterally established based on the stepladder pricing in the table below. The final unit price will be based on the total number of units procured within that 60-day timeframe. The Government retains the unilateral right to amend previously issued modifications to adjust unit pricing in accordance with the total quantity ordered within any 60-day period.

Note E - Table 1

NOTE F

NOTE F – The tables below establish stepladder pricing for base CLIN 0005, and if option CLINs are exercised; 1005, 2005, 3005 and 4005. The Section B amounts shall be established through unilateral modification in accordance with Section I clause 52.217-7 and the stepladder pricing in the tables below. The Government may procure a selection of the items identified in the tables below. Furthermore, the Government has the right to unilaterally increase the quantity procured for each of the specific hardware items identified in the tables (base CLIN 0005, and if option CLINS are exercised; 1005, 2005, 3005 and 4005) as long as it occurs before the latest option exercise date stated under Section I clause 52.217-7. If a quantity increase for a specific hardware item occurs within a 60-day period of other quantities procured for that item, then pricing for the total quantity procured for that specific hardware item within this 60-day period shall be adjusted to the unit price from the stepladder pricing tables below for the total quantity procured of that item. Conversely, for quantity increases of a specific hardware item not occurring within a 60-day period, the Government will utilize the unit pricing from the stepladder pricing tables below applicable to the quantity of each specific hardware item and the pricing of previous quantities procured of each hardware item shall not change. For funding and administrative purposes, at the time of option exercise and quantity purchase increases, the Contracting Officer may unilaterally establish separately priced contract line items (CLINs) or subcontract line items (SLINs). The Section B Firm Fixed Price (FFP) amount and the funding provided in each modification shall be unilaterally established based on the stepladder pricing in the tables below. Therefore, the final unit price of any specific item will be based on the total number of units procured for that item within that 60-day timeframe. The Government will retain the unilateral right to amend issued modifications at the final unit price.

Note F - Table 1

Note F - Table 2

Note F - Table 3

Note F - Table 4

Note F - Table 5

NOTE G

NOTE G – Stepladder pricing for Spares base CLIN 0100 and if option CLINs are exercised; 1100, 2100, 3100 and 4100 is as established in Attachment J-4. The Section B amounts shall be established through unilateral modification in accordance with Section I clause 52.217-7 and the stepladder pricing in Attachment J-4. The Government may procure a selection of the items identified in Attachment J-4. Furthermore, the Government has the right to unilaterally increase the quantity procured for each of specific spare item identified in Attachment J-4 (base CLIN 0100 and if option CLINs are exercised; 1100, 2100, 3100 and 4100) as long as it occurs before the latest option exercise date stated under Section I clause 52.217-7. If a quantity increase for a specific spare item occurs within a 60-day period of other quantities procured for that specific item, then pricing for the total quantity procured for that specific spare item within this 60-day period shall be adjusted to the unit price from the stepladder pricing table in Attachment J-4 for the total quantity procured of that item. Conversely, for quantity increases of a specific spare item not occurring within a 60-day period, the Government will utilize the unit pricing from the stepladder pricing table in Attachment J-4 applicable to the quantity of each specific spare item and the pricing of previous quantities procured of each spare item shall not change.

For funding and administrative purposes, at the time of option exercise and quantity purchase increases, the Contracting Officer may unilaterally establish separately priced contract line items (CLINs) or subcontract line items (SLINs). The Section B Firm Fixed Price (FFP) amount and the funding provided in each modification shall be unilaterally established based on the stepladder pricing in Attachment J-4. Therefore, the final unit price of any specific spare item will be based on the total number of units procured for that item within that 60-day timeframe. The Government will retain the unilateral right to amend issued modifications at the final unit price.

NOTE H

NOTE H – The quantity of labor hours is the estimtated order quantity. Labor hours for each task will be authorized via Technical Instruction (TI). The Cost Plus Fixed Fee (CPFF) amount provided in each modification shall be established unilaterally using the Composite Rate per Hour proposed in the table below. (Offeror to fill in)

Note H – Table 1

*The Offeror shall propose not less than zero (0) and no more than eight (8) percent for fixed fee.

The quantity of hours does not indicate that the Government will necessarily require this amount or any at all.

Other Direct Costs (COST ONLY) associated with performance of Engineering Services (CLINs 0200, 1200, 2200, 3200, 4200). The estimated value of the Other Directs Costs associated with performance of Engineering Services (CLINs 0200, 1200, 2200, 3200, 4200) is as follows:

Note H – Table 2

The estimated value of Other Direct Costs (ODCs) associated with engineering services (CLINs 0200, 1200, 2200, 3200, 4200) does not indicate that the Government will necessarily require this amount or any at all.

NOTE I

NOTE I – PERIOD OF PRICING AVAILABILITY

The Government may issue modifications against the listed CLINs within the periods of time established below. Periods established in this table are not to be confused with the delivery schedule, which shall be as specified in each modification, the individual modification periods (12 months), option exercise periods, or the contract’s total period of performance (60 months).

Note I – Table 1

NOTE J

NOTE J – Firm Fixed Pricing (FFP) for First Article Unit (FAU), Production Readiness Review (PRR) and Country of Origin Study shall be proposed in Section B.

NOTE K

NOTE K – ADMINISTRATION OF LEVEL OF EFFORT LINE ITEMS

(a) The total contract requirement (i.e., ceiling) for level of effort line items under this contract shall be expressed as a quantity of hours. This ceiling value shall be set forth in the clause under Section H of this contract entitled LEVEL OF EFFORT – ALTERNATE I.

(b) The Government will issue Technical Instructions (TIs) per the clause under Section H of this contract entitled NAVSEA 5252.242-9115 TECHNICAL INSTRUCTIONS. The Contractor shall not perform any effort under this item until and unless tasked by the Government via TI. The quantity of hours associated with each line item represents the estimated ceiling value in labor hours for that line item, and does not indicate that the Government will necessarily require or task this number of hours during contract performance, or any hours at all.

NOTE L

NOTE L: It is understood and agreed that the Government has no obligation under this contract to issue any orders hereunder. Orders will be placed in accordance with the terms and conditions of Section C clause C-217-H001 PROVISIONED ITEMS ORDERS—BASIC (NAVSEA). Funding will be provided with each order that is placed. The Government will apply the Attachment J-8, Contract Burdened Pricing Rates, fully-burdened rates to the direct labor and direct material bases to derive the total FFP for each order.

CLAUSES INCORPORATED BY FULL TEXT

B-227-H001 PROVISIONING TECHNICAL DOCUMENTATION – WITHHOLDING OF PAYMENT (NAVSEA) (OCT 2018)

(a) For the purpose of paragraph (c) of the "Progress Payments" clause of this contract, if included, the requirement that the Contractor develop and deliver Provisioning Technical Documentation (PTD) is considered to be a "material requirement of this contract," and Contractor failure to make adequate progress in the development of PTD, or to deliver acceptable PTD on a timely basis, may result in reduction or suspension of Progress Payments as provided in said paragraph.

(b) The PTD is considered to be a part of the "Technical Data" specified to be delivered under this contract for the purposes of the "Technical Data--Withholding of Payment" (DFARS 252.227-7030) clause. The terms and conditions of the clause entitled "Limitation On Withholding of Payments (FAR 52.232-9), if included in this contract, shall not apply to withholding of payment for failure to make timely delivery of the PTD or delivery of deficient PTD.

(End of text)

B-215-H002 REFUNDS (SPARES AND SUPPORT EQUIPMENT) (NAVSEA) (OCT 2018)

(a) In the event that the price of a spare part or item of support equipment delivered under this contract significantly exceeds its intrinsic value, the Contractor agrees to refund the difference. Refunds will not be made to recoup the amount of cost decreases that occur over time due to productivity gains (excluding economic purchase quantity considerations) or changes in market conditions.

(b) For purposes of this requirement, the intrinsic value of an item is defined as follows:

(1) If the item is one which is sold or is substantially similar or functionally equivalent to one that is sold in substantial quantities to the general public, intrinsic value is the established catalog or market price, plus the value of any unique requirements, including delivery terms, inspection, packaging, or labeling.

(2) If there is no comparable item sold in substantial quantities to the general public, intrinsic value is defined as the price an individual would expect to pay for the item based upon an economic purchase quantity as defined in FAR 52.207-4, plus the value of any unique requirements, including delivery terms, inspection, packaging or labeling.

(c) At any time up to two years after delivery of a spare part or item of support equipment, the Contracting Officer may notify the Contractor that based on all information available at the time of the notice, the price of the part or item apparently exceeds its intrinsic value.

(d) If notified in accordance with paragraph (c) above, the Contractor agrees to enter into good faith negotiations with the Government to determine if, and in what amount, the Government is entitled to a refund.

(e) If agreement pursuant to paragraph (d) above cannot be reached, and the Navy's return of the new or unused item to the Contractor is practical, the Navy, subject to the Contractor's agreement, may elect to return the item to the Contractor. Upon return of the item to its original point of Government acceptance, the Contractor shall refund in full the price paid. If no agreement pursuant to paragraph (d) above is reached, and return of the item by the Navy is impractical, the Contracting Officer may, with the approval of the Head of the Contracting Activity, issue a Contracting Officer's final decision on the matter, subject to Contractor appeal as provided in the "Disputes" clause (FAR 52.233-1).

(f) The Contractor shall make refunds, as required under this requirement, in accordance with instructions from the Contracting Officer.

(g) The Contractor shall not be liable for a refund if the Contractor advised the Contracting Officer in a timely manner that the price it would propose for a spare part or item of support equipment exceeded its intrinsic value, and with such advice, specified the estimated proposed price, the estimated intrinsic value and known alternative sources or item, if any, that can meet the requirement.

(h) This requirement does not apply to any spare parts or items of support equipment whose price is determined through adequate price competition. This requirement also does not apply to any spare part or item of support equipment if the Contractor submitted, and certified the currency, accuracy and completeness of, cost or pricing data applicable to the item.

(End of text)

B-231-H001 TRAVEL COSTS (NAVSEA) (OCT 2018)

(a) Except as otherwise provided herein, the Contractor shall be reimbursed for its actual travel costs in accordance with FAR 31.205-46. The travel costs to be reimbursed shall be those costs for which the Contractor has maintained appropriate documentation and which have been determined to be allowable, allocable, and reasonable by the Procuring Contracting Officer, Administrative Contracting Officer, or their duly authorized representative.

(b) Reimbursable travel costs include only that travel performed from the Contractor's facility to the worksite, in and around the worksite, and from the worksite to the Contractor's facility.

(c) Relocation costs and travel costs incidental to relocation are allowable to the extent provided in FAR 31.205-35; however, Procuring Contracting Officer approval shall be required prior to incurring relocation expenses and travel costs incidental to relocation.

(d) The Contractor shall not be reimbursed for the following daily local travel costs:

(i) travel at U.S. Military Installations where Government transportation is available,

(ii) travel performed for personal convenience/errands, including commuting to and from work, and

(iii) travel costs incurred in the replacement of personnel when such replacement is accomplished for the Contractor's or employee's convenience.

(End of text)

B-232-H005 PAYMENTS OF FEE(S) (LEVEL OF EFFORT)--ALTERNATE I (NAVSEA) (OCT 2018)

(a) For purposes of this contract, "fee" means "target fee" in cost-plus-incentive-fee type contracts, "base fee" in cost-plus-award-fee type contracts, or "fixed fee" in cost-plus-fixed-fee type contracts.

(b) The Government shall make payments to the Contractor, subject to and per the clause in this contract entitled "Fixed Fee" (FAR 52.216-8) or "Incentive Fee", (FAR 52.216-10), as applicable. Such payments shall be submitted by and payable to the Contractor pursuant to the clause of this contract entitled "Allowable Cost and Payment" (FAR 52.216-7), subject to the withholding terms and conditions of the "Fixed Fee" or "Incentive Fee" clause, as applicable. Fee paid per hour shall be based on total fee dollars divided by total hours to be provided. Total fee(s) paid to the Contractor shall not exceed the fee amount(s) set forth in this contract. In no event shall the Government be required to pay the Contractor any amount in excess of the funds obligated under this contract.

(End of text)

CLAUSES INCORPORATED BY FULL TEXT

B-232-H006 LIMITATION OF COST OR LIMITATION OF FUNDS CLARIFICATION (NAVSEA) (OCT 2018) The clause entitled "Limitation of Cost" (FAR 52.232-20) or "Limitation of Funds" (FAR 52.232-22), as appropriate, shall apply separately and independently to each separately identified estimated cost.

(End of text)

Section C - Descriptions and Specifications

Section C: Descriptions and Specification

CONTRACT LINE ITEM DESCRIPTION

C-1 LINE ITEM DESCRIPTIONS

The Console, Display, and Peripheral Equipment is comprised of CDS TI-16 Mod 1 Display Consoles Shipboard Display and Peripheral Equipment, and Tactical Equivalents, under CLINs 0001-0005 (if options are exercised 1001-1005, 2001-2005, 3001-3005, 4001-4005) – The Contractor shall manufacture, assemble, test, and deliver the Console, Display, and Peripheral Equipment in accordance with the applicable Technical Data Packages (Attachment J-2) and the requirements defined in the statement of work of this contract.

INCO, SPARES, REPAIRS-CLINs 0100 (if exercised, 1100, 2100, 3100, and 4100) – The Contractor shall test and deliver INCO/spares and repair parts. The INCO/spare and repair part descriptions and quantities shall be as established in each contract modification.

ENGINEERING SERVICES CLINs 0200 (if exercised, 1200, 2200, 3200, and 4200) – The Contractor Contractor shall provide engineering services (ES), conduct engineering studies, provide engineering analysis and trade-off studies, and/or support engineering changes as directed by the Government. The specific tasks shall be defined in each contract modification.

OTHER DIRECT COSTS (ODCs) CLIN 0300 (if exercised, 1300, 2300, 3300 and 4300) – The Contractor shall provide any travel, and/or any incidental material consumed effort necessary in the performance of the required Engineering Services. The specific ODC details shall be defined in each contract modification.

FIRST ARTICLE CLINs 0006-0008 – The Contractor shall support and complete first article requirements as defined in the Statement of Work.

PRR CLIN 0009 – The Contractor shall successfully support and complete a Production Readiness Review (PRR) as defined in the Statement of Work.

COUNTRY OF ORIGIN STUDY CLIN 0010 – The Contractor shall decompose the county of origin for all major electronic assemblies/subassemblies as defined in the Statement of Work.

DATA/CDRLs CLIN 0400 - The data to be furnished hereunder shall be prepared in accordance with the requirements of this contract and the Contract Data Requirements List (CDRL), DD Form 1423, Exhibit A, B and C. The item is Not Separately Priced (NSP).

PROVISIONED ITEMS ORDERS CLIN 5000 - Provisioned Items Orders will be placed in accordance with NOTE L and Section C clause C-217-H001 PROVISIONED ITEMS ORDERS—BASIC (NAVSEA). The supplies or services shall be identified in each PIO.

SECTION C-2 STATEMENT OF WORK

THE FOLLOWING STATEMENT OF WORK (SOW) IS APPLICABLE TO ALL LINE ITEMS UNLESS OTHERWISE SPECIFIED

1.0 SCOPE and Background

CDS is a set of watch station consoles designed to support the implementation of Open Architecture (OA) in Navy combat systems. The TI 16 MOD 1 CDS is the next evolution in the CDS family and shall consist of Water Cooled Variant A three-eyed horizontal display consoles with 14Hz - 35 Hz Shock isolators, Air Cooled Variant A three-eyed horizontal display consoles with 14Hz - 35 Hz Shock isolators and Air Cooled Variant A three-eyed horizontal display console with 8Hz Shock isolators. Shipboard Displays and Peripheral Equipment shall also be produced. A Tactical Equivalent (non-ruggedized) Console shall also be produced. In addition to the common CDS variant A configurations addressed above, there may be program specific requirements necessitating design, test, production and integration of additional hardware and/or software. These additional requirements shall be accomplished using the Engineering Services and Other Direct Costs (ODCs) CLINS of this contract.

CDS supports the Navy’s surface ship future combat systems, including those planned for AEGIS, Aircraft Carriers (CVNs), Amphibious Ships (LHDs, LHA-6 Class, LPDs, etc.), Fast Frigates (FFGs), Littoral Combat Ships (LCSs), Navy-Type/Navy-Owned (NT/NO) equipment installations on next generation United States Coast Guard (USCG) Cutters and other enterprise applications. The Navy’s TI 16 MOD 1 display and peripheral solutions includes Common Display System (CDS) consoles, Thin Client Displays (TCDs), Multi-Mission Displays (MMDs), Printers, and peripheral equipment.

CDS TI-16 Mod 1 provides solutions to address diminishing manufacturing supply and obsolescence issues. Additionally, the CDS TI 16 Mod 1 procurement incorporates shipboard display and peripheral components. TI 16 mitigates DMS impacts to the TI 12 AAU configuration, drives the AWS design toward the use of “common building blocks” thereby reducing the count of line repairable units (LRUs), incorporates IA requirements and system protection features into the initial design, and upgrades AWS processors and displays to allow the implementation of ACB 16 improvements.

1.1 Standard Console Configurations

The Contractor shall manufacture, test, and deliver TI-16 MOD 1 CDS Variant A Consoles with a standard console configuration of: three 24-inch displays, Keyboard, Speakers, Push to Talk Switch, Control Screen, 3U Display Server (w/10G Network Interface Card, Graphics Card, Sound Card, 1TB Solid State Disk Drive and Cisco Transceivers), CIM/Local Power Supply, VCMT cabling, CAC Reader, Illuminated Writing Surface mounted on Center Display and Chair with Rails. The anticipated add-on configurations are in the table below.

Variant 1 - Water-Cooled Console with 14/35Hz Shock Isolators

CLINS 0001, 1001, 2001, 3001 & 4001

OJ-845(V)9 CDS Consoles x11 VAB Panel w/ Tactile Cover (Center LHS), x11 VAB Panel w/ Tactile Cover (Far LHS), and Uninterruptible Power Supply.

Variant 2 - Air-Cooled Console with 14/35Hz Shock Isolators

CLINS 0002, 1002, 2002, 3002 & 4002

OJ-845A(V)7 CDS Consoles x11 VAB Panel w/ Tactile Cover (Center LHS), x11 VAB Panel (Far LHS)

OJ-845A(V)8 CDS Consoles x11 VAB Panel w/ Tactile Cover (Center LHS), x11 VAB Panel w/ Tactile Cover (Far LHS), Hand Controller (Far RHS), and additional 4-port NIC w/Cisco Transceivers.

OJ-845A(V)9 CDS Consoles x11 VAB Panel w/ Tactile Cover (Center LHS), x11 VAB Panel w/ Tactile Cover (Far LHS), and Uninterruptible Power Supply

Variant 3 - Air-Cooled Console with 8Hz Shock Isolators

CLINS 0003, 1003, 2003, 3003 & 4003

OJ-845B(V)7 CDS Consoles x11 VAB Panel w/ Tactile Cover (Center LHS), x11 VAB Panel w/ Tactile Cover (Far LHS), and Uninterruptible Power Supply.

OJ-845B(V)8 CDS Consoles x11 VAB Panel w/ Tactile Cover (Center LHS), x11 VAB Panel w/ Tactile Cover (Far LHS), Hand Controller (Far RHS), and Uninterruptible Power Supply.

2.0 APPLICABLE DOCUMENTS.

The following documents form part of the SOW to the extent specified herein. In the event of a conflict between the documents referenced herein and the contents of this SOW, the SOW shall be considered the superseding requirement. These documents are updated frequently; the Contractor shall refer to the latest approved version of these documents.

2.1 Government Documents

Program Executive Office, Integrated Warfare Systems

(PEO IWS) – Deputy Commander, Naval Sea Systems Command Research and System Engineering Warfare Systems Engineering and Human Systems Integration Directorate (NAVSEA 05H) Technical Review Manual (TRM) v2.0 18 Dec 2009

Program Executive Office, Integrated Warfare Systems

(PEO IWS) Instruction (INST) 5450.1 28 January 2012

Naval Sea Systems

Command Warfare Systems Engineering Directorate

(NAVSEA) Contracts Handbook 09 December 2009

Program Executive Office, Integrated Warfare Systems

(PEO IWS) 1.0 Configuration Management Plan (CMP) for the Technology Insertion (TI) Program 06 November 2018

Naval Sea Systems

Command Warfare Systems Engineering Directorate

(NAVSEA) Instruction 9078.22, Naval Ships Critical Safety Items (CSI) Program Technical Requirements 15 May 2008

Program Executive Office, Integrated Warfare Systems

(PEO IWS) Instruction (INST) 5450.1 01 July 2012

Naval Sea Systems

Command Warfare Systems Engineering Directorate

(…