Attach_1_Appendix_G__Government_Furnished_Facilities_(2015-05-05).doc

N00019-15-R-0106 Appendix G 05 May 2015

Government Furnished Facilities

1. The Government agrees to provide the property and services listed in this document at the Base Site Operations:

a. Office space of at least 120 square feet. Office space can be added to and located within the work area. As a minimum, the office will have telephone line hookup (domestic and international), lighting, 110VAC electrical wall outlets, and environmental climate control. The contractor will be authorized to establish telephone service via the base communications office and shall be responsible for all related costs including monthly service and toll calls. Any significant deviations will be addressed during contract execution.

b. At least 480 square feet of space for maintenance and parts stowage. This area will have 110VAC outlets and 98 cubic feet of securable stowage. Area will be accessible to aircraft parking location by a hardened surface on which a tool bin or dolly can be rolled.

c. At least 200 square feet of securable space for support equipment.

d. A designated area for flammable storage.

e. Hangar space for major maintenance, which has 110VAC and 220VAC outlets.

f. Ramp parking with tie downs and grounding points.

g. Single point mail pickup and delivery. Base fire and security services will be made available.

h. Office Equipment/Furnishings: The Government makes no guarantee of the availability of the office equipment/furnishings such as desk, chairs, cabinets and shelving. When office equipment/furnishings are made available to the Contractor at the Base Site Operations, they are provided in an “as is” condition.

2. All Government Installation back shops, where Base Site Operations occur, may not be available for contractor use. The availability or authorization for use will depend on the Government Installation’s procedures in-place. Listed below are back shop support normally available, recognizing support will vary at each installation:

a. Non-Destructive Inspection Shop

b. PMEL access for calibrating torque wrenches

c. Engine shop

d. Electrical shop

e. Avionics shop

f. Battery shop

g. Aerospace Ground Support Equipment (GSE) shop

h. Parachute (Fabric) shop

i. Wash Rack

j. Fuel cell maintenance area

k. Welding and machine shop

l. Tire shop

m. Hydraulics shop

3. Flight line/maintenance support equipment will be provided on a scheduled basis. The Government will provide servicing for items listed below:

a. Fuel servicing truck with driver

b. De-icing vehicle with MIL-SPEC de-icing fluid