MSP Freezer Door RFQ Specs.docx

This is a Request for Quotation specifications document for the Maine State Prison's replacement of a walk-in freezer door. The project involves the procurement and installation of an American Panel raised casing freezer door unit at the facility's kitchen location. The vendor selected will be responsible for ordering, delivering, and installing the replacement freezer door, as well as removing and properly disposing of the existing door. The freezer door specifications include a 36-inch opening width and 77-inch opening height, with an exterior frame measuring 50 inches wide by 84.25 inches tall. The door features FRP full perimeter framing, 4-inch foamed-in-place urethane construction, metal-faced plywood interior casting, double threshold wiper gasket, frame and threshold heater, brushed hardware, cam lift hinges, hydraulic door closer, magnetic gasket, and stainless steel trim. The unit is configured as an indoor, floorless freezer with left-hand hinge orientation and includes a deadbolt handle with padlock provision and inside release mechanism. Interior and exterior finishes are specified as 22-gauge stainless steel, with 1/8-inch diamond treadplate kickplates measuring 34 inches in height on the interior and 36 inches on the exterior.

Vendors submitting proposals must include manufacturer's warranty information as part of their response. The facility provides a loading dock for vendor use, with convenient access to the kitchen installation location via a flat route without intervening stairways, facilitating straightforward delivery and installation logistics.