Moore_Park_Tennis_Courts_Upgrades_-_Bid_Drawings_(12.20.25).pdf
PDF 7 MB Posted
- Attached to
- Moore Park Tennis Courts Improvements
- Solicitation number
- 2025-IFB-302
- Issued by
- Allegheny County, Pennsylvania
About this file
These are bid drawings for the Moore Park Tennis Courts Improvements project prepared by the City of Pittsburgh Bureau of Facilities, Department of Public Works, located at 1801 Pioneer Avenue, Pittsburgh, Pennsylvania 15226 (Project No. 2025-88509, dated October 28, 2025). The project scope includes improvements to three existing tennis courts with a base bid requiring demolition of existing asphalt, removal and reinstallation of existing benches and concrete pads, repaving with asphalt per specification, removal and reinstallation of an existing large bleacher structure, furnishing and installation of three sets of tennis posts and nets, and resurfacing and striping of all three courts in two colors using existing layouts with SportMaster Sport Surfaces products in light green and light blue. Four add-alternate items are available for bidders to price: repair or replacement of sub-base materials as needed, furnishing and installation of four city player benches, furnishing and installation of a large aluminum bleacher, and furnishing and installation of trash and recycling receptacles. The contractor is responsible for site visits and evaluation of sub-base conditions prior to bidding, protection of all on-site trees to the dripline or minimum one foot per inch of tree diameter, removal and disposal of all demolition materials, repair of any construction-related damage to existing court facilities and walkways, and reseeding and maintenance of all disturbed areas until grass establishment is complete.
The drawings provide detailed construction specifications including asphalt resurfacing layers (1.5 inch minimum wearing course of PennDOT Superpave 9.5mm, 1.5 to 2 inches of leveling/binder course PennDOT Superpave 19mm, and 6 inches minimum compacted PennDOT 2A base course), concrete bench pads measuring 8 feet by 2.5 feet, concrete receptacle pads measuring 5 feet by 2.5 feet, and specific requirements for trash and recycling receptacles (Victor Stanley Model SD-42 with S-2A dome lids in black for litter and blue for recycling, 36-gallon capacity). Player benches are detailed as Model DMTS 7.5 x 2 units secured to concrete pads with 12-inch diameter anchor bolts. All metal components must meet specifications including steel shot-blasting, etching, phosphatizing, and powder coating with 8-10 mil thickness. The contractor must visit the site to evaluate existing sub-base conditions and provide bids accordingly, with all pricing terms, specific award dates, and contract durations to be determined through the formal bidding process.
View the file
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
L-1
NEW TENNIS COURT LAYOUT USING EXISTING COURT DIMENSIONS
SCALE: 1" = 20' (printed on 11"x17" paper)
Bleachers Court 1
ProposedTrash/RecyclingLocation
Court 2
Court 3
Proposed Bench/PadLocation (Typical)
Proposed Bench/PadLocation (Typical)
M O
O R
E
TE
N N
IS
C
O U
R
TS
IM
PR
O
VE
M
EN
T
City of Pittsburgh
Bureau of Facilities
Department of Public Works
P io ne er
A ve
Pi tts bu rg h, P A
2025-88509
DATE: 10/28/25
Site Plan
L-1 1 4
SCALE
NORTH
BASE BID SCOPE OF WORK
COURTS 1 to 3:
1. Existing fence to remain. Vendor is responsible to remove and store fencing as needed to allow machinery access to courts, and reinstall after completion.
2. Demolish existing asphalt and remove existing benches including concrete pads and footers.
3. Repave asphalt per detail.
4. Remove large bleacher and reinstall.
5. Furnish and install set of tennis posts and Nets (3) per attachment specs.
6. Resurface (2 colors) and stripe tennis courts per existing layout.
ADD ALTERNATES
Add-alt 1: Repair / replace sub-base as needed, per detail.
Add-alt 2: Furnish and install city player benches (4) per detail. See plans for locations and dimensions.
Add-alt 3: Furnish and install large aluminum bleacher.
Per detail.
Add-alt 4: Furnish and install trash/recycling receptacles per detail. Location shown on site plan.
NOTES:
Contractor responsible for visiting the site and evaluating sub-base prior to bid.
Repave and resurface color coating on all tennis courts per existing layout.
Use SportMaster Sport Surfaces products in light green and light blue. See attachments for reference.
All trees on site MUST BE PROTECTED. Contractor will be liable for any damages to trees. Tree protection should be installed to the edge of the dripline of the tree. If that can't be maintained, the next fallback position is a radius equal to 1 ft for every inch in tree diameter.
Contractor to haul and dispose of all stripped and unusable materials.
Contractor to repair any damages to existing courts, walkways, or other park features that may occur during construction.
Contractor shall reseed all disturbed areas and provide maintenance until the grass is fully established
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Sheet No.
AutoCAD SHX Text of
L-2
NEW TENNIS COURT LAYOUT USING EXISTING COURT DIMENSIONS
SCALE: 1" = 20' (printed on 11"x17" paper)
CONCRETE RECEPTACLES PAD,
5' X 2.5'
CONCRETE BENCH PAD,8' X 2.5'
CONCRETE BENCH PAD,8' X 2.5'
+/- 11"
54'
+/- 173
120'
12'
12' 36'
15' 36'
15' 36'
+/- 11'
21'
78'
21'
M O
O R
E
TE
N N
IS
C
O U
R
TS
IM
PR
O
VE
M
EN
T
City of Pittsburgh
Bureau of Facilities
Department of Public Works
P io ne er
A ve
Pi tts bu rg h, P A
2025-88509
DATE: 10/28/25
Layout Plan
L-2 2 4
SCALE
NORTH
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Sheet No.
STRIP EXISTING
LAYER(S) OF
BITUMINOUS PAVING
EXISTING SUBBASE
TO REMAIN (WHERE
APPLICABLE)
EXISTING SUBGRADE
EXISTING SURFACE
LIQUID APPLIED ACRYLIC SURFACE SYSTEM
(CUSHIONED OR NON-CUSHIONED)
1-1/2" MIN. WEARING COURSE, PENNDOT
SUPERPAVE 9.5mm OR APPROVED EQUAL
1-1/2" - 2" MIN. LEVELING / BINDER COURSE,
PENNDOT SUPERPAVE 19mm OR APPROVED EQUAL
6" MIN. COMPACTED PENNDOT 2A BASE COURSE -
RESTORATION DEPTH SHALL VARY. FURNISH AND
INSTALL SUBBASE AGGREGATE AS FIELD REQUIRED
FOR GRADING AND COMPACTION PURPOSES, TO
ACHIEVE PROPER ELEVATIONS, AND/OR REPLACE
EXISTING SUBBASE MATERIAL INADVERTENTLY
REMOVED DUE TO ADHERENCE TO BINDER. ROLL
AND COMPACT SUBBASE THOROUGHLY.
PROPOSED SURFACE
UNDISTURBED
SUBGRADE
CD-1
STRIPPING AND RESURFACING BITUMINOUS TENNIS COURT
N.T.S.
TACK
COATS
NOTES:
1. ALL FABRICATED METAL COMPONENTS ARE STEEL SHOTBLASTED, ETCHED, PHOSPHATIZED, PREHEATED, AND
ELECTROSTATICALLY POWDER-COATED WITH T.G.I.C. POLYESTER POWDER COATINGS. PRODUCTS ARE FULLY CLEANED AND PRETREATED, PREHEATED AND COATED WHILE HOT TO FILL CREVICES AND BUILD FILM COATING.
COATED PARTS ARE THEN FULLY CURED TO COATING MANUFACTURER'S SPECIFICATIONS. THE THICKNESS OF
THE RESULTING FINISH AVERAGES 8-10 MILS (200-250 MICRONS).
2. PLASTIC INNER LINERS ARE MOLDED ON TOOLING DESIGNED FOR AND OWNED BY VICTOR STANLEY, INC.
3. PRODUCT MUST BE PERMANENTLY AFFIXED TO THE GROUND.
4. ANCHOR BOLT NOT PROVIDED BY VICTOR STANLEY, INC.
LIDS: S-2A DOME LID, WITH DECALS FOR RECYCLING CAN
SECURITY: MOUNT LID WITH 3 IN-LINE ANCHOR HOLES
AND BOTTOM PLATE COVER.
LITTER RECEPTACLE: MODEL SD-42, WITH S-2A DOME LID, COLOR BLACK, AS SUPPLIED BY VICTOR STANLEY, P.O.
DRAWER 330, DUNKIRK, MD 20754 USA, 1.800.368.2573 OR APPROVED EQUIVALENT.
RECYCLING RECEPTACLE: MODEL SD-42, WITH S-2A DOME LID AND RECYCLING DECALS, COLOR BLUE, AS SUPPLIED BY VICTOR STANLEY, P.O. DRAWER 330, DUNKIRK, MD 20754 USA, 1.800.368.2573 OR APPROVED EQUIVALENT.
Ø 28"
41-3/4"
38-5/8"
19"
36-GALLON CAPACITY HIGH
DENSITY PLASTIC LINER
(WEIGHT NOT TO EXCEED 6 LBS.)
SITS ON 3/8" x 3" SUPPORT BARS
(4) LEVELING FEET WITH 3/8" DIAMETER
THREADED STEEL SHAFT
5/8" SOLID
STEEL TOP
RING(42) 3/8" X 1"
VERTICAL
STEEL BARS
1/4" X 2-1/2"
HORIZONTAL
SOLID STEEL
BAND
3/4" SQUARE ANCHOR BOLT HOLES MOUNT
TO CONCRETE WITH TAMPER-PROOF BOLTS
PER MANUFACTURER'S RECOMMENDATIONS
ALT. # 6 TRASH AND RECYCLING RECEPTACLES
N.T.S.
CD.1
ALT. # 6 RECYCLING RECEPTACLES DOME TOP LID DECAL
N.T.S.
CD.1
M O
O R
E
TE
N N
IS
C
O U
R
TS
IM
PR
O
VE
M
EN
TS
City of Pittsburgh
Bureau of Facilities
Department of Public Works
P io ne er
A ve
Pi tts bu rg h, P A
2025-88509
DATE: 10/28/2025
Construction Details
CD.1
3 4
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Sheet No.
ALT. # 2 - PLAYER BENCH. MODEL DMTS 7.5 x 2 N.T.S.
CD.2
ATTACH BENCH TO
CONCRETE WITH 12" DIA. X
4" LONG ANCHOR BOLTS,
TYP. PAINT BOLT HEAD
TO MATCH BENCH
ADJACENT
SURFACE
CONCRETE PAVING,
BROOM FINISH.
COMPACTED
SUBGRADE
CONCRETE BENCH PAD
N.T.S.
6' TYP. 2.5' TYP.
CD-2
M O
O R
E
TE
N N
IS
C
O U
R
TS
IM
PR
O
VE
M
EN
TS
City of Pittsburgh
Bureau of Facilities
Department of Public Works
P io ne er
A ve
Pi tts bu rg h, P A
2025-88509
DATE: 10/28/25
CONSTRUCTION
DETAILS
CD.2
4 4
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Sheet No.
| Sheets and Views |
| L-1 |
| GE12.04.25 1.pdf |
| Sheets and Views |
| L-2 |
| GE 12.02.25 Rev2.pdf |
| Sheets and Views |
| L-1 |
| GE 12.02.25 Rev2 B.pdf |
| Sheets and Views |
| L-2 |
| GE 12.02.25 Rev2 C.pdf |
| Sheets and Views |
| CD.01 |
| GE 12.02.25 Rev2 D.pdf |
| Sheets and Views |
| CD.02 |
File details come from the government source that posted it. Updated .