Drawings_12.4.25.pdf
PDF 7 MB Posted
- Attached to
- Moore Park Tennis Courts Improvements
- Solicitation number
- 2025-IFB-302
- Issued by
- Allegheny County, Pennsylvania
About this file
This is a construction drawing document for the Moore Park Tennis Courts Improvements project prepared by the City of Pittsburgh Bureau of Facilities, Department of Public Works, located at 1801 Pioneer Avenue, Pittsburgh, PA 15226 (Project No. 2025-88509). The project encompasses resurfacing and improvements to three existing tennis courts with a base bid scope that includes demolition of existing asphalt, removal of existing benches and concrete pads, asphalt repaving, removal and reinstallation of a large bleacher structure, furnishing and installation of three sets of tennis posts and nets, and resurfacing and striping of all three courts using SportMaster Sport Surfaces products in light green and light blue per the existing court layout. The drawings indicate a site plan at a scale of 1" = 20' (printed on 11"x17" paper) showing court locations, proposed trash/recycling receptacle placement, and bench pad locations, along with detailed construction specifications for bituminous paving layers and finishes.
Four add-alternate options are available to the bidding vendors: Add-Alternate 1 for sub-base repair or replacement as needed; Add-Alternate 2 for furnishing and installing four city player benches (Model DMTS 7.5 x 2) on concrete pads measuring 8' x 2.5'; Add-Alternate 3 for furnishing and installing a large aluminum bleacher; and Add-Alternate 4 for furnishing and installing trash and recycling receptacles (Victor Stanley Model SD-42 with S-2A dome lids in black and blue). The contractor is required to visit the site and evaluate the sub-base prior to bidding, is responsible for protecting all trees on site with protection extending to the dripline or a radius of 1 foot per inch of tree diameter, and must repair any construction-related damages to existing courts, walkways, and park features while reseeding and maintaining all disturbed areas until grass is fully established. The contractor is also responsible for removing and storing existing fencing as needed for machinery access and reinstalling it upon completion, and for hauling and disposing of all stripped and unusable materials.
View the file
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
L-1
NEW TENNIS COURT LAYOUT USING EXISTING COURT DIMENSIONS
SCALE: 1" = 20' (printed on 11"x17" paper)
Bleachers Court 1
ProposedTrash/RecyclingLocation
Court 2
Court 3
Proposed Bench/PadLocation (Typical)
Proposed Bench/PadLocation (Typical)
M O
O R
E
TE
N N
IS
C
O U
R
TS
IM
PR
O
VE
M
EN
T
City of Pittsburgh
Bureau of Facilities
Department of Public Works
P io ne er
A ve
Pi tts bu rg h, P A
2025-88509
DATE: 10/28/25
Site Plan
L-1 1 4
SCALE
NORTH
BASE BID SCOPE OF WORK
COURTS 1 to 3:
1. Existing fence to remain. Vendor is responsible to remove and store fencing as needed to allow machinery access to courts, and reinstall after completion.
2. Demolish existing asphalt and remove existing benches including concrete pads and footers.
3. Repave asphalt per detail.
4. Remove large bleacher and reinstall.
5. Furnish and install set of tennis posts and Nets (3) per attachment specs.
6. Resurface (2 colors) and stripe tennis courts per existing layout.
ADD ALTERNATES
Add-alt 1: Repair / replace sub-base as needed, per detail.
Add-alt 2: Furnish and install city player benches (4) per detail. See plans for locations and dimensions.
Add-alt 3: Furnish and install large aluminum bleacher.
Per detail.
Add-alt 4: Furnish and install trash/recycling receptacles per detail. Location shown on site plan.
NOTES:
Contractor responsible for visiting the site and evaluating sub-base prior to bid.
Repave and resurface color coating on all tennis courts per existing layout.
Use SportMaster Sport Surfaces products in light green and light blue. See attachments for reference.
All trees on site MUST BE PROTECTED. Contractor will be liable for any damages to trees. Tree protection should be installed to the edge of the dripline of the tree. If that can't be maintained, the next fallback position is a radius equal to 1 ft for every inch in tree diameter.
Contractor to haul and dispose of all stripped and unusable materials.
Contractor to repair any damages to existing courts, walkways, or other park features that may occur during construction.
Contractor shall reseed all disturbed areas and provide maintenance until the grass is fully established
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Sheet No.
AutoCAD SHX Text of
L-2
NEW TENNIS COURT LAYOUT USING EXISTING COURT DIMENSIONS
SCALE: 1" = 20' (printed on 11"x17" paper)
CONCRETE RECEPTACLES PAD,
5' X 2.5'
CONCRETE BENCH PAD,8' X 2.5'
CONCRETE BENCH PAD,8' X 2.5'
+/- 11"
54'
+/- 173
120'
12'
12' 36'
15' 36'
15' 36'
+/- 11'
21'
78'
21'
M O
O R
E
TE
N N
IS
C
O U
R
TS
IM
PR
O
VE
M
EN
T
City of Pittsburgh
Bureau of Facilities
Department of Public Works
P io ne er
A ve
Pi tts bu rg h, P A
2025-88509
DATE: 10/28/25
Layout Plan
L-2 2 4
SCALE
NORTH
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Sheet No.
STRIP EXISTING
LAYER(S) OF
BITUMINOUS PAVING
EXISTING SUBBASE
TO REMAIN (WHERE
APPLICABLE)
EXISTING SUBGRADE
EXISTING SURFACE
LIQUID APPLIED ACRYLIC SURFACE SYSTEM
(CUSHIONED OR NON-CUSHIONED)
1-1/2" MIN. WEARING COURSE, PENNDOT
SUPERPAVE 9.5mm OR APPROVED EQUAL
1-1/2" - 2" MIN. LEVELING / BINDER COURSE,
PENNDOT SUPERPAVE 19mm OR APPROVED EQUAL
6" MIN. COMPACTED PENNDOT 2A BASE COURSE -
RESTORATION DEPTH SHALL VARY. FURNISH AND
INSTALL SUBBASE AGGREGATE AS FIELD REQUIRED
FOR GRADING AND COMPACTION PURPOSES, TO
ACHIEVE PROPER ELEVATIONS, AND/OR REPLACE
EXISTING SUBBASE MATERIAL INADVERTENTLY
REMOVED DUE TO ADHERENCE TO BINDER. ROLL
AND COMPACT SUBBASE THOROUGHLY.
PROPOSED SURFACE
UNDISTURBED
SUBGRADE
CD-1
STRIPPING AND RESURFACING BITUMINOUS TENNIS COURT
N.T.S.
TACK
COATS
NOTES:
1. ALL FABRICATED METAL COMPONENTS ARE STEEL SHOTBLASTED, ETCHED, PHOSPHATIZED, PREHEATED, AND
ELECTROSTATICALLY POWDER-COATED WITH T.G.I.C. POLYESTER POWDER COATINGS. PRODUCTS ARE FULLY CLEANED AND PRETREATED, PREHEATED AND COATED WHILE HOT TO FILL CREVICES AND BUILD FILM COATING.
COATED PARTS ARE THEN FULLY CURED TO COATING MANUFACTURER'S SPECIFICATIONS. THE THICKNESS OF
THE RESULTING FINISH AVERAGES 8-10 MILS (200-250 MICRONS).
2. PLASTIC INNER LINERS ARE MOLDED ON TOOLING DESIGNED FOR AND OWNED BY VICTOR STANLEY, INC.
3. PRODUCT MUST BE PERMANENTLY AFFIXED TO THE GROUND.
4. ANCHOR BOLT NOT PROVIDED BY VICTOR STANLEY, INC.
LIDS: S-2A DOME LID, WITH DECALS FOR RECYCLING CAN
SECURITY: MOUNT LID WITH 3 IN-LINE ANCHOR HOLES
AND BOTTOM PLATE COVER.
LITTER RECEPTACLE: MODEL SD-42, WITH S-2A DOME LID, COLOR BLACK, AS SUPPLIED BY VICTOR STANLEY, P.O.
DRAWER 330, DUNKIRK, MD 20754 USA, 1.800.368.2573 OR APPROVED EQUIVALENT.
RECYCLING RECEPTACLE: MODEL SD-42, WITH S-2A DOME LID AND RECYCLING DECALS, COLOR BLUE, AS SUPPLIED BY VICTOR STANLEY, P.O. DRAWER 330, DUNKIRK, MD 20754 USA, 1.800.368.2573 OR APPROVED EQUIVALENT.
Ø 28"
41-3/4"
38-5/8"
19"
36-GALLON CAPACITY HIGH
DENSITY PLASTIC LINER
(WEIGHT NOT TO EXCEED 6 LBS.)
SITS ON 3/8" x 3" SUPPORT BARS
(4) LEVELING FEET WITH 3/8" DIAMETER
THREADED STEEL SHAFT
5/8" SOLID
STEEL TOP
RING(42) 3/8" X 1"
VERTICAL
STEEL BARS
1/4" X 2-1/2"
HORIZONTAL
SOLID STEEL
BAND
3/4" SQUARE ANCHOR BOLT HOLES MOUNT
TO CONCRETE WITH TAMPER-PROOF BOLTS
PER MANUFACTURER'S RECOMMENDATIONS
ALT. # 6 TRASH AND RECYCLING RECEPTACLES
N.T.S.
CD.1
ALT. # 6 RECYCLING RECEPTACLES DOME TOP LID DECAL
N.T.S.
CD.1
M O
O R
E
TE
N N
IS
C
O U
R
TS
IM
PR
O
VE
M
EN
TS
City of Pittsburgh
Bureau of Facilities
Department of Public Works
P io ne er
A ve
Pi tts bu rg h, P A
2025-88509
DATE: 10/28/2025
Construction Details
CD.1
3 4
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Sheet No.
ALT. # 2 - PLAYER BENCH. MODEL DMTS 7.5 x 2 N.T.S.
CD.2
ATTACH BENCH TO
CONCRETE WITH 12" DIA. X
4" LONG ANCHOR BOLTS,
TYP. PAINT BOLT HEAD
TO MATCH BENCH
ADJACENT
SURFACE
CONCRETE PAVING,
BROOM FINISH.
COMPACTED
SUBGRADE
CONCRETE BENCH PAD
N.T.S.
6' TYP. 2.5' TYP.
CD-2
M O
O R
E
TE
N N
IS
C
O U
R
TS
IM
PR
O
VE
M
EN
TS
City of Pittsburgh
Bureau of Facilities
Department of Public Works
P io ne er
A ve
Pi tts bu rg h, P A
2025-88509
DATE: 10/28/25
CONSTRUCTION
DETAILS
CD.2
4 4
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Sheet No.
| Sheets and Views |
| L-1 |
| GE12.04.25 1.pdf |
| Sheets and Views |
| L-2 |
| GE 12.02.25 Rev2.pdf |
| Sheets and Views |
| L-1 |
| GE 12.02.25 Rev2 B.pdf |
| Sheets and Views |
| L-2 |
| GE 12.02.25 Rev2 C.pdf |
| Sheets and Views |
| CD.01 |
| GE 12.02.25 Rev2 D.pdf |
| Sheets and Views |
| CD.02 |
File details come from the government source that posted it. Updated .