2) Sample SubK Rev. 1- RFP MG-11182026.pdf

PDF 334 KB Posted

Attached to
Advanced Light Source Upgrade (ALS-U) STORAGE RING (SR) BENDB AND BENDC MAGNETS
Solicitation number
MG-11192026
Issued by

About this file

This is a fixed-price subcontract between The Regents of the University of California (Lawrence Berkeley National Laboratory) and a subcontractor to be identified for the design, fabrication, and delivery of BENDB and BENDC dipole magnet types for the Advanced Light Source Upgrade (ALS-U) Storage Ring. The NAICS classification is 332999 (All Other Miscellaneous Fabricated Metal Product Manufacturing) with a size standard of 750 or fewer employees. The subcontract is issued under Prime Contract No. DE-AC02-05CH11231 with the U.S. Department of Energy for the management and operation of Lawrence Berkeley National Laboratory.

The ordered items include one BENDB dipole magnet (1st Article) due by 12/17/27; four BENDB dipole magnets (Production) due by 7/28/28; one BENDC dipole magnet (1st Article) due by 12/17/27; four BENDC dipole magnets (Production) due by 7/28/28; two BENDB/C sets of spare coils due by 7/28/28; materials (copper, steel, and Cobalt-Iron) sufficient for ten total magnets due by 9/17/27; and a closeout checklist due by 7/28/28. The subcontract includes optional items for up to 30 additional production magnets (15 BENDB and 15 BENDC) with delivery dates of 9/15/28 and 11/17/28. All prices and extended amounts are marked TBD. Invoices must be submitted within 30 days of acceptance to APInvoice@lbl.gov, with payment due within 30 days of receipt (or 15 days for small businesses). First article testing is required with notification to the University at least 30 work days before testing begins, and test reports must be submitted within five work days of completion. The University Procurement Representative is Martha Gamarano Grausz at MGGrausz@lbl.gov or (510) 486-6618. Shipping terms are FOB Destination for domestic subcontractors or Delivered at Place Unloaded (DPU) for foreign subcontractors, with shipment to Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 69, Berkeley, CA 94720.

View the file

Other files

File Type Posted
9) Rep Cert BENDB and BENDC.docx DOCX document
AL-1977-2102A.pdf PDF
1) RFP-BVSS BENDB and BENDC Rev. 1.pdf PDF
AL-1925-6318A.pdf PDF
7) Past Performance Reference Form B.docx DOCX document
5) GP-Commercial Supplies and Services.pdf PDF
AL-1925-6317A.pdf PDF
8) AL-1208-0209C.pdf PDF
3) AL-1977-2101B_SOW.pdf PDF
6) GP-Commercial Foreign.pdf PDF
4) AL-1977-2097A_TS.pdf PDF
AL-1477-4120N.pdf PDF
AL-1479-9548N.pdf PDF
10) Price Proposal Schedule A RFP MG-11182026.xlsx XLSX spreadsheet
Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Subcontract No. TBD Page 1

SUBCONTRACT

NO. TBD

The Regents of the University of California Lawrence Berkeley National Laboratory One Cyclotron Road Berkeley, CA 94720

Subcontractor:

SUBCONTRACTOR - TBD

Attention: TBD Town/State/TBD Phone: TBD Fax: TBD E-Mail: TBD

University Procurement Representative:

Name: Martha Gamarano Grausz Title: Principal Subcontracts Administrator Phone: (510) 486-6618 Fax: (510) 486-4380 E-Mail: MGGrausz@lbl.gov

Introduction This is a fixed-price subcontract (hereinafter "Subcontract") for BENDB and BENDC magnet types, for the Advanced Light Source Upgrade (ALS-U) Storage Ring (SR), as further described herein. The North American Industry Classification System (NAICS) for this acquisition is 332999 All Other Miscellaneous Fabricated Metal Product Manufacturing, size standard 750 or fewer employees.

This Subcontract is between The Regents of the University of California (hereinafter "University") and the party identified above as the "Subcontractor".

This Subcontract is issued under Prime Contract No. DE-AC02-05CH11231 between the University and the United States Government (hereinafter "U.S. Government"), represented by the Department of Energy (hereinafter "DOE") for the management and operation of the Lawrence Berkeley National Laboratory (hereinafter "LBNL") and the performance of certain research and development work.

Agreement The parties agree to perform their respective obligations in accordance with the terms, conditions, and provisions of the attached SCHEDULE OF ARTICLES and the documents referenced or incorporated therein, which together with this Signature Page shall collectively constitute the entire Agreement and shall supersede all prior negotiations, representations, or agreements, whether verbal or written.

SUBCONTRACTOR - TBD

THE REGENTS OF THE

UNIVERSITY OF CALIFORNIA

By:

By:

Name:

Name:

Title:

Title:

Date:

Date:

Subcontract No. TBD Page 2

SCHEDULE OF ARTICLES

ARTICLE 1 – ORDERED ITEMS

Description The Subcontractor shall furnish and deliver the following ordered item(s), in accordance with this Subcontract:

Item

Item ID/Description Quantity UOM Unit Price

Extended Amount

Delivery Schedule:

1 AL-1477-4120 - BENDB

dipole magnet - 1st Article

1.00 EA $TBD $TBD By 12/17/27

2 AL-1477-4120 - BENDB

dipole magnet - Production

4.0

EA $TBD $TBD By 7/28/28

3 AL-1479-9548 - BENDC

dipole magnet - 1st Article

1.00 EA $TBD $TBD By 12/17/27

4 AL-1479-9548 - BENDC

dipole magnet - Production

4.0 EA $TBD $TBD By 7/28/28

5 AL-1469-4114, AL-1469-

5062 - BENDB/C set of spare coils

2.00 EA $TBD $TBD By 7/28/28

6 Copper, steel, and Cobalt-Iron material sufficient to complete 5 BENDB (1st Article and Production) and 5 BENDC (1st Article and Production) magnets (Total 10)

N/A LOT $TBD $TBD By 9/17/27

7 Closeout Checklist (per the SOW Appendix A)

1.00 EA $TBD $TBD By 7/28/28

Total Subcontract Amount $TBD

The above delivery schedule identifies the date(s) by which the specified item(s) shall be delivered to the shipping address indicated in the article below entitled Shipping Requirements.

Acceptance Acceptance of the items described above is based upon successful completion of the acceptance criteria per the Statement of Work (SOW) AL-1977-2101 titled Statement of Work for the ALS-U Storage Ring BENDB and BENDC Magnets, Rev. B dated 10/21/2026, incorporated into this Subcontract.

Electrical Device Certification Requirement All electrical equipment, components, conductors, and other items delivered to the University, or to any subcontractor facility or remote work location, of the type requiring testing by a Nationally Recognized Testing Laboratory (NRTL) recognized by the Occupational Safety and Health Administration (OSHA) shall be NRTL listed, labeled, and certified in accordance with Part 1910, Occupational Safety and Health Standards, of Title 29 of the Code of Federal Regulations (29 CFR 1910). The Subcontractor shall notify the Technical Representative, Technical Representative, in writing of any item to be delivered that does not meet this requirement. The University reserves the right to refuse delivery of or return any such items.

Subcontract No. TBD Page 3

Information on required NRTL testing is available at https://www.osha.gov/nationally-recognized-testing-laboratory-program.

Notice to Proceed The following documents shall be submitted to the University. Acceptable documents, as determined by the University, must be submitted and a Notice to Proceed must be issued before any work may commence, unless otherwise noted below.

• Hold Point (HP) – The Subcontractor must not proceed beyond a hold point (HP) per the incorporated SOW AL-1977-2101 titled Statement of Work for the ALS-U Storage Ring BENDB and BENDC Magnets, Rev. B dated 10/21/2026, Section 7.5 – Hold points and what’s required, without a formal written Notice to Proceed (NTP).

ARTICLE 2 – PRICE AND PAYMENT

Fixed Price The Subcontractor shall furnish and deliver the ordered item(s) for the total fixed price of $TBD.

Sales or Use Tax Items purchased by the University hereunder are treated as for resale, per the University's California State Resale Permit No. SR-CH 21-835970 for LBNL, and shall not be subject to any California or other State sales or use tax if shipped to California. Any items furnished hereunder for rentals or leases are subject to California State sales or use tax, and such tax is included in the fixed prices/rates stated herein.

The University of California State Resale Permit No. SR-CH 21-835970 for LBNL is available at:

http://procurement.lbl.gov/supplier-forms/.

Invoices

• The Subcontractor shall email invoice(s) directly to the LBNL Accounts Payable Office at APInvoice@lbl.gov, within thirty days of the acceptance of the item(s). The "subject" line of the email shall state the Subcontractor's name and the Subcontract number. If final invoices are not submitted within 180 days of acceptance, then any amounts paid by the University to that point will represent satisfaction in full by LBNL under this Subcontract and an Accord and Satisfaction.

This means that LBNL will not be obligated to make any further payments under this Subcontract.

To avoid delays in processing and payment, Subcontractors should include only one attachment per email. Multiple invoices should be combined and attached as a single portable document format (PDF) or Microsoft Word or rich text format (RTF) file (up to 30 individual invoices per attachment) or emailed separately (one attachment per email). Do not include icons/pictures in the email (logos, etc.) and ensure only one subcontract number is listed on the invoice.

• Invoice(s) shall state: the Subcontract number; the Subcontractor (including business heading or logo); bill-to address (same address as above); invoice date; unique invoice number; remittance address; sufficiently identify the items/services being invoiced; and identify any separately payable freight charges (with receipts if available) and taxes. Invoice(s) in a spreadsheet format are not acceptable, but a spreadsheet can be used to support an invoice. The Subcontractor shall maintain records which support all invoiced amounts and provide them to the University Procurement Representative upon request.

http://procurement.lbl.gov/supplier-forms/ mailto:APInvoice@lbl.gov

Subcontract No. TBD Page 4

• For the shipment of goods, subcontractors must provide a written statement of the unavailability of U.S. flag air carriers on the invoice for foreign flag air carrier service costs to be allowed. The following written statement of the unavailability of U.S. -flag carriers must appear on invoices submitted and shall read as follows:

Statement of Unavailability of U.S. -flag carriers International air transportation of persons (and their personal effects) or property by U.S.-flag air carrier was not available or it was necessary to use foreign-flag air carrier for service for the following reasons (see section 47.403 of the Federal Acquisition Regulation: [State reasons]:

Payment Terms All invoices except the final invoice shall be payable within 30 days of receipt, or 15 days if the Subcontractor is a designated small business, if the invoice submission is compliant with the subcontract requirements for invoicing; provided, however, that payments made thereafter shall not be subject to any penalty, interest, or late charges. Only those items/services identified in this Subcontract or a Subcontract Modification will be considered for payment. Payment amounts may be adjusted for any applicable credits, offsets, or withholds. Full payment shall not be due until any final acceptance requirements of this Subcontract have been satisfied. For inquiries about the status of an invoice, call (510) 486-6954 or aphelp@lbl.gov.

California Tax Withholding For services physically performed in California, the University must withhold and remit California Franchise Tax Board (FTB) taxes from payments made to non-residents, in accordance with the California Revenue and Taxation Code Section 18662, unless a valid exemption or waiver has been claimed and accepted by the FTB. The FTB explains this process in Publication 1017 (https://www.ftb.ca.gov/forms/misc/1017).

The required FTB documentation (e.g., Form CA 587 Nonresident Withholding Allocation Worksheet or Form CA 590 Withholding Exemption Certificate) was previously submitted and accepted by the University for the purpose of vendor setup. Based on the submitted documentation, and in accordance with FTB guidance, the University will determine the appropriate nonresident withholding requirements for payments made under this subcontract. If the subcontractor's California withholding status changes during the performance period, the subcontractor must promptly provide updated documentation to the University by contacting the Accounts Payable department at APHelp@lbl.gov.

ARTICLE 3 – OPTIONS

The University reserves the right, in its sole discretion, to exercise any or all of the following options, in any combination, under the stated pricing, terms, and conditions of this Subcontract. The exercise of any option shall be by issuance of a written modification by the University Procurement Representative. The modification may be executed at any point during the term of the Subcontract. The Subcontractor will be notified of the University's intent to extend the term by a written notice sent at least thirty (30) days before the expiration date. However, the preliminary notice shall not commit the University to extend the term of this Subcontract. The prices of the option(s) are firm fixed prices, and include all costs associated with each option, such as labor, materials, equipment, support functions, management, fees, G&A, and profit.

At its election, the University reserves the right to renegotiate lower pricing before extending the term of this Agreement.

https://www.ftb.ca.gov/forms/misc/1017

Subcontract No. TBD Page 5

Optional Items

Item # Item ID/Description Quantity UOM Unit Price

Extended Amount

Delivery Schedule:

1 AL-1477-4120 - BENDB dipole magnet - Production 5 EA $TBD $TBD By

9/15/28

AL-1479-9548 - BENDC dipole magnet - Production

5 EA $TBD $TBD By 9/15/28

AL-1477-4120 - BENDB dipole magnet - Production

10 EA $TBD $TBD By 11/17/28

4 AL-1479-9548 - BENDC dipole magnet - Production 10 EA $TBD $TBD By

11/17/28

Total $TBD

ARTICLE 4 – SUBCONTRACT ADMINISTRATION

Notices, Requests, and Modifications The Subcontractor shall submit all notices and requests for approval by email to the University Procurement Representative indicated on the signature page.

Only the University Procurement Representative is authorized to modify the terms, conditions, and requirements of this Subcontract, including any changes to the description of the work, and to issue any notices and approvals required by this Subcontract. Certain changes to this Subcontract may be made only by the University Procurement Representative without subcontractor agreement or negotiation prior to the change. Such changes may include: changes of an administrative nature, directed changes pursuant to the clause incorporated herein entitled: “CHANGES,” unilateral modifications authorized by clauses other than the Changes clause, and termination notices. Apart from the University Procurement Representative’s authority to issue unilateral changes, the parties may mutually agree to make changes in the work ordered, or modify any other term or condition of the subcontract, resulting in an amendment to the subcontract, but only by a written modification signed by the authorized representatives of both parties.

Technical Representative The Technical Representative is TBD for this Subcontract. This individual is designated to monitor performance of the work and to interpret and clarify the technical requirements, but is not authorized to make changes to the work or to modify any of the terms and conditions of this Subcontract, including those related to the completion schedule or pricing.

Technical Representative TechRep@lbl.gov

(510) 486-XXXX

Subcontract No. TBD Page 6

Technical Direction and Changes Performance of the work under this Subcontract shall be subject to the technical direction of the University Technical Representative. The Subcontractor shall promptly proceed with the performance of technical direction of the nature prescribed by this article issued by the University Technical Representative.

The term "technical direction" is defined to include directions to the Subcontractor within the Scope of Work of the Subcontract which: (1) clarify the desired work emphasis between work areas or tasks; (2) direct the pursuit of certain lines of inquiry; (3) assist in the interpretation of drawings, specifications, or technical portions of the work description; or (4) fill in details necessary to perform and complete the Scope of Work. All technical direction must be issued in writing by the University Technical Representative.

The University Technical Representative is not authorized to issue any technical direction which would:

(1) constitute an assignment of work outside the general scope of the work covered by this Subcontract;

(2) change the description of the work to be performed or any applicable drawings, designs, and specifications; (3) change the time or place of performance; the method of shipment or packaging, or the place of inspection, delivery or acceptance; (4) increase the estimated cost for performance of the work, the fixed fee, or the time required for performance of the work; (5) change any expressed term or condition of the Subcontract; or (6) unreasonably interfere with the Subcontractor’s ability to perform and complete the work.

Any such technical direction must first be authorized by a written modification to this Subcontract issued by the University Procurement Representative, as provided in the clause of these General Provisions entitled Changes.

If any instruction or direction by the University Technical Representative falls within one of the types described in the paragraph above, the Subcontractor shall not proceed to act on such technical direction and shall promptly notify the University Procurement Representative. Upon receipt of a notification from the Subcontractor, the University Procurement Representative shall promptly advise the Subcontractor either that, in accordance with the Changes clause: (1) the technical direction is within the general scope of the Subcontract and does not constitute a change and to proceed to act on such technical direction; or

(2) the technical direction is not within the general scope of the Subcontract or would constitute a change, and to not act on such technical direction unless and until the University issues a written modification to the Subcontract.

Closeout The Subcontractor shall, as a condition of full payment, assist the University after the completion of the work in accomplishing the administrative closeout of this Subcontract, including, as necessary or required, the furnishing of documentation and reports, the disposition of property, the disclosure of any inventions, the execution of any required documents (including an Assignment and Release form if this form is an incorporated document), the performance of any audits, and the settlement of any interim or disallowed costs.

ARTICLE 5 – FURNISHED AND ACQUIRED PROPERTY

Subcontract No. TBD Page 7

The University will not furnish any U.S. Government Property for use under this Subcontract and no Subcontractor Acquired Property is anticipated. The Subcontractor is not authorized to acquire, fabricate, or provide any tangible personal property items for use under this Subcontract without the University Procurement Representative's advance written approval via Subcontract modification. The Subcontractor is required to notify the University prior to purchasing any Subcontractor Acquired Property and assumes the risk of not being reimbursed for property if approvals are not provided by the University in advance via Subcontract modification.

ARTICLE 6 – SHIPPING REQUIREMENTS

Shipping Terms A. Shipping Terms (if a Domestic subcontractor is selected) The shipping terms are FOB Destination, freight prepaid, and add. All shipments shall be shipped via the Subcontractor's vehicles or a licensed common carrier selected by the Subcontractor, at the Subcontractor's expense.

OR

A. Shipping Terms (if a foreign subcontractor is selected)

The shipping terms are Delivered at Place Unloaded (DPU) (per Incoterms 2020) to the delivery address. All shipments shall be shipped via a U.S. flag air carrier or U.S. Ocean vessel and a U.S.

licensed common carrier selected by the Subcontractor, at the Subcontractor's expense.

Shipping Value The Subcontractor is required to declare the full value of the item(s) when shipped.

Shipping Cost Airway bills shall be marked with the appropriate “Government Package” entry. Shipping costs in excess of those per the shipping instructions specified in the subcontract shall be deducted from the Subcontractor’s invoice.

Shipping Address All shipments shall be shipped to the following address:

Lawrence Berkeley National Laboratory For the U.S. Department of Energy One Cyclotron Road, Building 69 Berkeley, CA 94720

Shipping Point The shipping point is: TBD

Customs Clearance (if a foreign subcontractor is selected) To facilitate customs clearance, 48 hours prior to vessel departure Subcontractor shall email or fax interfreight copies of the following documents to Aeronet Worldwide (broker identified below) and the University Procurement Representative (identified in the Subcontract):

Subcontract No. TBD Page 8

• Bill of Lading

• Commercial Invoice

• Packing List

Aeronet Worldwide 1755 Rollins Road Burlingame, CA 94010 Phone: (650) 259-2155 Fax: (650) 259-2150 Email: SFOimport@aeronet.com

Shipments via Ocean The bills of lading for any ocean shipments of equipment, material, or commodities, including any such bills of lading produced by lower-tier subcontractors, must be sent to the Department of Transportation, Maritime Administration, at cargo. MARAD@dot.edu and the University’s Procurement Representative (identified in the Subcontract) within 30 days of shipment.

ARTICLE 7 – REPORTS

Type of Reports The Subcontractor shall prepare and submit the following reports to the University:

1. Reports as identified within the Statement of Work Reports as identified within the SOW AL-1977-2101 titled Statement of Work for the ALS-U Storage Ring BENDB and BENDC Magnets, Rev. B dated 10/21/2026, Section 7.2 - Reporting/communication requirements, shall be prepared and submitted in accordance with the instructions provided therein.

Submittal Reports shall be separately submitted to the following recipients at the following email or mailing address:

Lawrence Berkeley National Laboratory Attention: [Intended Recipient; see below] One Cyclotron Rd., Mail Stop [see below] Berkeley, CA 94720

Recipient Mail Stop Email Technical Representative TBD TBD@lbl.gov Martha G. Grausz - Receipt of Non-Technical Reports

90R1121-PROC mggrausz@lbl.gov

ARTICLE 8 – APPROVAL OF TECHNICAL DATA

If this Subcontract requires the Subcontractor to furnish any drawings, specifications, diagrams, layouts, schematics, descriptive literature, illustrations, schedules, performance or test data, or other technical data mailto:SFOimport@aeronet.com mailto:MARAD@dot.edu mailto:mggrausz@lbl.gov

Subcontract No. TBD Page 9 for approval by the University prior to Subcontractor performance, the approval of the data by the University shall not relieve the Subcontractor from responsibility for any errors or omissions in such data or from responsibility for complying with the requirements of this Subcontract, except as specified below.

Any work done prior to such approval shall be at the Subcontractor's risk.

Unless otherwise specified, the University requires a period of 10 working days from date of receipt to review and approve the data. If the University does not approve the data within the allotted time period, the parties will establish a new time period for review and approval of the data and, if necessary, the delivery schedule or completion date will be equitably adjusted.

If the data includes any variations from the Subcontract requirements, the Subcontractor shall describe such variations in writing at the time of submission of the data. If the University approves any such variation(s), a change order to the Subcontract shall be issued by the University and, if appropriate, a bilateral modification to the Subcontract shall be negotiated.

ARTICLE 9 – PRELIMINARY INSPECTION

The University reserves the right to observe and witness all phases of the manufacturing of the items, including design, fabrication, assembly, testing, and inspection, conducted at the Subcontractor's facility or at any of its sub-tier subcontractors' facilities.

Preliminary in-process and source inspections may be performed at the Subcontractor's facility or at any of its sub-tier subcontractors' facilities. The inspection shall allow the University to verify that the Subcontractor has met the requirements of this Subcontract. Prior to University inspection, the Subcontractor shall perform a complete inspection and document the results. The Subcontractor shall present this documentation to the University at the time of the preliminary inspection. Such preliminary inspection does not waive the right of the University to inspect and accept or reject at the destination. The University reserves the right to subcontract with a qualified third party to conduct on its behalf any or all of the University inspections.

ARTICLE 10 – ENVIRONMENTALLY PREFERABLE PRODUCTS AND SERVICES

General Sustainable Products and Services In the performance of this Subcontract, the Subcontractor shall provide and use sustainable products and services to the maximum extent practicable, consistent with the requirements of FAR 52.223-23, Sustainable Products and Services (Deviation Jan 2026). When delivering products to the Laboratory, furnishing products for use by the Laboratory, incorporating products into the construction of a laboratory building or work, or furnishing products for use in performing services where the cost is a direct cost to this Agreement, the Subcontractor shall ensure the products meet the following criteria as applicable:

1. Recovered Materials: Products containing recovered material designated by the Environmental Protection Agency (EPA) under the Comprehensive Procurement Guidelines (CPG).

2. Energy Efficiency: Energy-efficient products or low standby power devices (e.g., ENERGY STAR® or Federal Energy Management Program (FEMP)-designated products).

3. Biobased Products: Biobased products that meet the content requirements of the USDA under the BioPreferred® program.

Subcontract No. TBD Page 10

4. Non-Ozone Depleting Alternatives: Substances identified in the EPA’s Significant New Alternatives Policy (SNAP) program as safe alternatives to ozone-depleting substances.

The Subcontractor shall also minimize the supply of products with toxic and hazardous characteristics, and minimize the generation of toxic and hazardous waste, to the maximum extent practicable. The GSA Clearinghouse/Procurement site provides links to sustainability resources and information on these federal environmental programs.

Reporting Requirements – Biobased Products In accordance with FAR 52.223-2, Reporting of Biobased Products Under Service and Construction Contracts (Deviation Jan 2026), the Subcontractor must:

1. Report to the Laboratory Sustainable Procurement Representative (Business-Assurance- Sustainable@lbl.gov) on the product types and dollar value of any USDA-designated biobased products purchased by the Subcontractor related to Laboratory subcontract requirements during the previous Government fiscal year (between October 1 and September 30); and

2. Submit this report no later than October 31 of each year during Agreement performance, and at the end of Agreement performance.

Labeling of Ozone-Depleting Substances and High Global Warming Potential Hydrocarbons If products containing or using ozone-depleting substances as defined in in 40 CFR part 82, subpart E, are to be delivered to the Laboratory or on behalf of the Laboratory anywhere in the United States, in accordance with 40 CFR 82.84(a)(5), the subcontractor shall label products that contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C.

7671j(b), (c), (d), and (e) and 40 CFR part 82, subpart E, as follows:

“Warning: Contains (or manufactured with, if applicable) *_______, a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.”

*The subcontractor shall insert the name of the substance(s).

E-Waste Recycling Requirements For any electronic equipment removed by the Subcontractor and scheduled to be refurbished or recycled, the Subcontractor must attest that those actions will be handled by a refurbisher or recycler that is third-party certified to one of the recognized electronics recycling certification programs used in the United States: The Responsible Recycling Standard (R2) or the e-Stewards Standard by the Basel Action Network

(BAN).

Packaging The Subcontractor is strongly encouraged to minimize the supply of single-use items and utilize smart-size packaging to reduce waste. Recycling practices and methods should be used to minimize adverse environmental effects.

1. Compliance: All packaging must be compliant with the California Toxics in Packaging Prevention Act (California AB 455 2006).

https://www.gsa.gov/governmentwide-initiatives/federal-highperformance-buildings/highperformance-building-clearinghouse https://www.gsa.gov/governmentwide-initiatives/federal-highperformance-buildings/highperformance-building-clearinghouse mailto:Business-Assurance-Sustainable@lbl.gov mailto:Business-Assurance-Sustainable@lbl.gov https://www.ecfr.gov/current/title-40/chapter-I/subchapter-C/part-82/subpart-E

Subcontract No. TBD Page 11

2. Preferred Packaging: The Laboratory strongly prefers that all packaging meet at least one of the following criteria:

o Uses bulk packaging;

o Uses reusable packaging (e.g., totes reused by delivery service for the next delivery);

o Uses innovative packaging that reduces weight, reduces waste, or serves as a component of the product;

o Maximizes recycled content and/or meets or exceeds the minimum post-consumer content level for packaging in the EPA CPG; or o Uses locally recyclable or certified compostable material.

3. Foam Packaging: To the maximum extent commercially feasible, the Subcontractor should avoid the use of packaging foam (expanded polystyrene or EPS) and instead utilize easily biodegradable, plant-based foams (such as those derived from corn or mushrooms) or paper-based cushioning.

ARTICLE 11 – FIRST ARTICLE APPROVAL

The Subcontractor shall test the first articles of the BENDB and the BENDC, in accordance with the requirements of this Subcontract and the incorporated SOW. The Subcontractor shall perform these tests in sufficient time to allow delivery of the ordered items by the delivery date(s) specified in this Subcontract. At least 30 work days before the beginning of first article tests, the Subcontractor shall notify the University Technical Representative, in writing, of the time and location of the testing so the University may witness the tests.

The Subcontractor shall submit a first article test report within five (5) work days from completion of the test to the University Technical Representative, marked "FIRST ARTICLE TEST REPORT: Subcontract No. TBD, AL-1477-4120 - BENDB dipole magnet - 1st Article and AL-1479-9548 - BENDC dipole magnet - 1st Article

Within ten (10) work days after the University receives the test report, the University shall notify the Subcontractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Subcontractor from complying with all requirements of the specifications and all other terms and conditions of this Subcontract. A notice of conditional approval shall state any further action required of the Subcontractor. A notice of disapproval shall cite reasons for the disapproval.

If the first article is disapproved, the Subcontractor, upon the University's request, shall repeat any or all first article tests. After each request, the Subcontractor shall make any necessary changes, modifications, or repairs to the first article or select another unit for first article testing. All costs related to these tests are to be borne by the Subcontractor, including any and all costs for additional tests following a disapproval. The Subcontractor shall then conduct the tests and deliver another report to the University under the terms and conditions and within the time specified by the University. The University shall take action on this report within the time specified in the third paragraph above. The University reserves the right to require an equitable adjustment of the Subcontract price for any extension of the delivery schedule or for any additional costs to the University related to these tests.

Subcontract No. TBD Page 12

If the Subcontractor fails to deliver any first article report on time, or the University disapproves any first article, the Subcontractor shall be deemed to have failed to make delivery within the meaning of the termination for default provisions of this Subcontract.

If the University does not act within the time specified in the third or fourth paragraphs above, the University shall, upon timely written request from the Subcontractor, equitably adjust the delivery or performance dates and/or the Subcontract price, and any other subcontractual term affected by the delay.

Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the Subcontract quantity is at the sole risk of the Subcontractor. Before first article approval, the costs thereof shall not be allocable to this Subcontract for (1) progress payments, or

(2) termination settlements if the Subcontract is terminated for the convenience of the University.

The Subcontractor shall produce both the first article and the production quantity at the same facility.

ARTICLE 12 – REPRESENTATION OF LIMITED RIGHTS DATA AND RESTRICTED

COMPUTER SOFTWARE

The Federal Acquisition Regulation clause FAR 52.227-14, RIGHTS IN DATA-GENERAL, is incorporated by reference as part of this Subcontract. Under the clause, the Subcontractor may withhold from delivery data that qualify as limited rights data or restricted computer software, and deliver form, fit, and function data instead. By acceptance or performance of this Subcontract, the Subcontractor certifies that none of the data proposed for fulfilling the data delivery requirements qualifies as limited rights data or restricted computer software. If the Subcontractor believes data to be provided for fulfilling the data delivery requirements under this Subcontract qualify as limited rights data or restricted computer software, the Subcontractor must notify the University procurement representative and the University technical representative identified in the Subcontract, within 10 days of award and identify such data.

ARTICLE 13 – INCORPORATED DOCUMENTS

The following documents are hereby incorporated as a part of this Subcontract. The order of precedence for each document must be as specified in the Entire Agreement and Order of Precedence clause in the General Provisions. Any other documents not incorporated herein by specific reference are excluded from this Subcontract. The documents marked with an asterisk are available at http://procurement.lbl.gov/supplier-forms/.

• AL-1977-2101 titled Statement of Work for the ALS-U Storage Ring BENDB and BENDC Magnets, Rev. B dated 10/21/2026

• AL-1925-6317 titled SR BENDB Magnets ACL, Rev. A dated 11/17/2026

• AL-1925-6318 titled SR BENDC Magnets ACL, Rev. A dated 11/17/2026

ARTICLE 14 – GENERAL PROVISIONS

The following General Provisions are incorporated by reference into this Subcontract and are available at:

http://procurement.lbl.gov/welcome-to-procurement-property/become-a-supplier/general-provisions/.

http://procurement.lbl.gov/supplier-forms/ http://procurement.lbl.gov/welcome-to-procurement-property/become-a-supplier/general-provisions/

Subcontract No. TBD Page 13

General Provisions for Commercial Supplies & Services, dated 10/09/26

OR

General Provisions for Commercial Supplies & Services (Foreign), dated 10/09/26.

The clauses listed in the referenced General Provisions shall be applicable to this Subcontract, based on the value of the Subcontract, the status of the Subcontractor, or the nature and location of the Services, as indicated in the General Provisions.

(END OF SCHEDULE OF ARTICLES)

Article 7 – REPORTS

File details come from the government source that posted it. Updated .