Response to Questions 1 - RFP MG 052122026.pdf

PDF 88 KB Posted

Attached to
Storage Ring (SR) Direct Current Transducers (DCCT) Modules
Solicitation number
MG-05212026
Issued by

About this file

This document is a Questions and Answers (Q&A) response from Lawrence Berkeley National Laboratory (LBNL) addressing four inquiries related to RFP MG-05212026, dated May 28, 2026.

The first two questions concern the availability of technical documentation for DaniSense current transducer components (ribbon cable and board assemblies) that are part of a COTS coil assembly to be provided by LBNL. LBNL confirmed these items are included in their deliverable but clarified that STEP format drawings are not available. The third question addresses acceptance criteria and testing requirements referenced in document AL-1876-8204 Rev A. LBNL directed the inquirer to SOW document AL-1852-0746 Rev C, specifying that the acceptance criteria list will be used by LBNL to evaluate deliverables upon receipt and that acceptance is contingent on successful completion of evaluations. The SOW also establishes that the subcontractor is responsible for performing visual inspections prior to shipment, including external inspection, internal inspection, wiring and connections inspection, final cleanliness and hardware check, and maintaining inspection records. The fourth question concerns the availability of a Molex Connector (P/N 1731090166) with a 16–20 week lead time for the LT-EL-SR-PS-CTP-6302-01 DCCT Interface PCB Assembly. LBNL responded that neither BNL nor LBNL maintains stock of this component, requiring the supplier to provide it.

View the file

Other files

Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

LBNL Response to Question 01 Re: LBNL RFP MG-05212026 – 05/28/2026

1. Are there drawings for the following items part of AL-1752-7178B?

• Item# 33 2 p/o_DX200IH-CP01_ribbon-cable Current Transducer Ribbon Cable (2443100001) DaniSense

• Item# 32 2 p/o_DX200IH-CP01_board Current Transducer, Board, (2312200002) DaniSense

LBNL Response: Both of these items are part of the COTS DaniSense coil assembly, which will be provided by LBNL.

2. Could LBNL provide the (STEP) Files for the drawings if they are available?

LBNL Response: These drawings are not available.

3. In the AL-1876-8204 Rev: A Document, there are several Acceptance Criteria (Testing requirements). Is there an official Test Procedure, and if so, can LBNL supply it?

LBNL Response: As detailed in the SOW document # AL-1852-0746 REV C, Section 6.3 ACL upon receipt at LBNL The acceptance criteria list, AL-1876-8204, will be used by LBNL to evaluate and accept all deliverables. Acceptance of the assemblies is contingent upon successful completion of these evaluations.

Section 6.2, Required Factory Inspections and Test The subcontractor is responsible for performing the following visual inspections prior to shipment, using the applicable drawings and BOM as reference:

• External Inspection

• Internal Inspection

• Wiring and connections Inspection

• Final cleanliness and hardware check

• Inspection record

4. In On the LT-EL-SR-PS-CTP-6302-01 DCCT Interface PCB Assembly, there is a Molex Connector P/N 1731090166 with a 16–20-week lead-time. Does LBNL or BNL have this part in stock, and can it be supplied rather than waiting the 16-20 weeks?”

LBNL Response: Neither BNL nor LBNL has this component in stock, so it needs to be provided by the supplier.

File details come from the government source that posted it. Updated .