Amendment 007.pdf

NSN 7540-01-152-8070 STANDARD FORM 30. (Rev. 10-83) Previous Edition unusable Prescribed by GSA FAR (48 CFR) 53.243

Page of Pages AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code

2. AMENDMENT MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (if applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than item 6) CODE

(x) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

8. NAME AND ADDRESS OF CONTRACTOR (NO., Street, Country, State and ZIP Code)

CODE FACILITY CODE

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning ______ copies of amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OR OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

Check One

A. THIS ORDER ID ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 16B. UNITED STATES OF AMERICA

(Signature of person authorized to sign)

15C. DATE SIGNED

(Signature of Contracting Officer)

16C. DATE SIGNED

Supplementary Page

PAGE 2 OF GS-01P-12-BW-D-0013/007

Description of Modification/Amendment:

Lighting fixture information is attached.

Supplementary Page

PAGE 3 OF GS-01P-12-BW-D-0013/007

PAGE 2 OF GS-01P-12-BW-D-0013/007

Amendment 007

GS-01P-12-BW-D-0013

Lighting Fixtures, Ribicoff and Cotter

PREVENTIVE MAINTENANCE ITEM

L-3 Lighting, Special Fixture (Frequency: Annual) Application:

This applies to special lighting fixtures such as found in lobbies, porticos, court rooms, and auditoriums, and for fixtures above 12 feet.

Checkpoints:

1. Clean fixture thoroughly.

2. Check all sockets, replace as needed.

3. Inspect anchors or anchoring device, tighten as needed.

4. Examine fixture glass, side panels, diffusers, etc., For cracks, breaks, etc. Replace as necessary.

5. If group re-lamping is due, change all lamps; otherwise, replace only those that are burned out.

6. Check operation.

7. Clean up work area and remove all debris.

Recommended Tools, Materials, and Equipment:

1. Standard tools – Basic

2. Ladder constructed according to OSHA/ANSI standards. Check ladder for defects. Do not use defective ladders.

LOCATION FIXTURE TYPE QUANITY LAMP

ANNEX COURT

1, 2, +3

CHANDLEIR 12 FIXTURES, 36

LAMP

13W PL/SP35

ANNEX COURT

1, 2, +3

SOFFIT 81 TWO LAMP STRIP

FIXTURES, 486 LAMPS

F40SP35/T212RS

ANNEX LOBBY RECESSED FIXTURE 3 FIXTURES, 6 LAMPS GE BIAX T/E ECO 26W

4 PIN

ANNEX LOBBY SPOT 4 FIXTURES, 4 LAMPS QUARTZ Lamp Unknown Size

1ST FLOOR LOBBY RECESSED FIXTURE 8 FIXTURES, 8 LAMPS GE MULTI-VAPOR

LAMP 175 WATT

MVR175/U -47760

2ND FLOOR NORTH

AND SOUTH

COURTROOMS

LIGHT CLOUD STRIP

FIXTURE

120 FIXTURES, 240

LAMPS

SYLVANIA OCTRON

XPS ECOLOGIC

F032/841XPS/ECO

L-4 Lighting, Outside; Incandescent (Frequency: Semiannual), Fluorescent, Mercury Vapor Or High Pressure Sodium ( Frequency: Five Years) Application:

PAGE 3 OF GS-01P-12-BW-D-0013/007

GS-01P-12-BW-D-0013

This guide applies to parking lot, street, loading dock, and perimeter lighting, and provides for group Re-lamping and maintenance of such fixtures outside the building.

Special Instructions.

1. Review the standard operating procedure for "Controlling Hazardous Energy Sources."

Checkpoints:

1. Open and tag switch.

2. Remove old lamp and clean fixture including reflector, refractor, and globes.

3. Inspect condition of wiring, contacts, terminals, and sockets. Look for evidence of overheating.

4. Install new lamp and assemble checking gaskets for proper seat.

5. Test operation of automatic switches.

6. Inspect lamp standards and mounting devices.

7. Clean up work area and remove all trash.

Recommended Tools, Materials, And Equipment:

1. Standard tools – Basic

2. Cleaning materials. Consult the Material Safety Data Sheets (MSDS) for hazardous ingredients and proper Personal Protective Equipment (PPE).

LOCATION FIXTURE TYPE QUANITY LAMP

PERIMETER DOWN LIGHT 21 FIXTURES, 21

LAMPS

GE MULTI VAPOR

LAMP

MXR100/U/MED

18680

PERIMETER WALL PAK 15 FIXTURES, 15

LAMPS

PHILLIPS CERAMLUX

ALTO C250S50 ALTO

PERIMETER GLOBE 9 FIXTURES, 9 LAMPS 60 WATT COMPACT

FLUORESCENT

EDISON BASE

ANNEX PARKING RECESSED FIXTURE 22 FIXTURES, 22

LAMPS

100 WATT METAL

HALIDE HX-HPF

ANNEX GUARD FLOOD 1 FIXTURE, 1 LAMP 250 WATTGE MULTI

VAPOR MVR250/U

42729

LOADING DOCK AND

SHELDON STREET

ENTRANCE

RECESSED EXTERIOR

FIXTURE

9 FIXTURES, 9 LAMPS 100 WATT METAL

HALIDE HX-HPF

PENTHOUSE

PERIMETER

EXTERIOR UTILITY

GLASS JAR TYPE

8 FIXTURES, 8 LAMPS 60 WATT COMPACT

FLUORESCENT

EDISON BASE

ANNEX ENTRANCE RECESSED FIXTURE 3 FIXTURES, 3 LAMPS 13W PL/SP35

PAGE 4 OF GS-01P-12-BW-D-0013/007

GS-01P-12-BW-D-0013

FLUORESCENT FIXTURES

Ribicoff FB

Qty

F32/T8 (7,488)

T8U6 (144)

GE ECOLUX HIGH OUTPUT F24W-T5-835-ECO (326)

GE ECOLUX HIGH EFFICIENCY F28W-T5-835-ECO (228)

Cotter FB

Qty

Linear Fluorescent Straight Lamp GE 00268-F32T8XLSPX35HCVG 4165

Linear Fluorescent - U-Shaped GE 28149 F32T8SP35/U6/ECO 324

Soft White Spiral® T3 GE 00262 – FLE26HT32SWCD3PK 26

Compact Fluorescent - Self-Ballasted GE 16459 – FLE13HT3/2/SW/2P 224

GSA/PBS

10 CAUSEWAY ST., RM 1100

BOSTON MA 02222-1077