Mechanical_Roof_Level_Combined.pdf

PDF 15 MB Posted Aug 5, 2026

Attached to: Construction Manager at Risk Services for the Orange County Convention Center West Building BAS and HVAC Upgrades
Solicitation number: Y26-813
Issued by: Orange County, Orlando City, Florida

About this file

Written by GovTribe AI · Aug 10, 2026

Mechanical Roof Level Combined Drawing Summary

This document is a set of mechanical roof-level combined plans (sheets MD301-MD313 and M302-M313) prepared by SGM Engineering, Inc. for Orange County Convention Center's West Building BAS and HVAC Upgrades project in Orlando, Florida. The plans detail both demolition and installation phases of HVAC equipment and controls across multiple roof sections of the facility.

The plans establish comprehensive general notes requiring contractor coordination with the project manager to prevent disruption to adjacent spaces and campus cooling systems. Critical requirements include field verification of existing equipment prior to demolition, patching and sealing all abandoned HVAC penetrations, disposal of sheet metal and piping by the general contractor, professional cleaning of reused ductwork, and field verification of existing fire/smoke dampers with replacement as required. The contractor must document all equipment removed and installed on Orange County Convention Center's asset tracking forms. Chilled water pipe freezing is required up to existing isolation valves, with replacement and removal of old isolation and control valves upon completion. The demolition sheets (MD301-MD313) indicate equipment marked for removal with numbered notation keys designating demolition scope (note 1) versus equipment remaining in service (note 2). Installation sheets (M302-M313) show corresponding equipment to remain with new control upgrades, requiring damper replacement cost provisions and credit backs for dampers not replaced. Existing controls are maintained where feasible, with fans monitored by Building Automation System only. The project is phased with Priority 1 and Priority 2 designations indicated on certain roof sections to manage construction sequencing and operational continuity.

View the file

Other files

File	Type	Posted
Construction_Manager_at_Risk_Services_for_the_Orange_County_Convention_Center_West_Building_BAS_and_HVAC_Upgrades_(Addendum_#1_Revision).pdf	PDF	Aug 19, 2026
Construction_Manager_at_Risk_Services_for_the_Orange_County_Convention_Center_West_Building_BAS_and_HVAC_Upgrades.pdf	PDF	Aug 5, 2026
2B-OCCC_Special_Terms__0966-48.pdf	PDF	Aug 5, 2026
Mechanical_Level_3_Combined.pdf	PDF	Aug 5, 2026
Mechanical_Level_4_Combined.pdf	PDF	Aug 5, 2026
Mechanical_Level_5_Combined.pdf	PDF	Aug 5, 2026
Y26-813-CC_Solicitation.pdf	PDF	Aug 5, 2026
Title_Sheet_Combined.pdf	PDF	Aug 5, 2026
Mechanical_Schedules_&_Details.pdf	PDF	Aug 5, 2026
Mechanical_Level_2_Combined.pdf	PDF	Aug 5, 2026
Electrical_Level_2.pdf	PDF	Aug 5, 2026
Mechanical_Enlarged_Plans_Combined.pdf	PDF	Aug 5, 2026
Combined_Specifications.pdf	PDF	Aug 5, 2026
Arch.pdf	PDF	Aug 5, 2026
Electrical_Level_4_5_And_Roof.pdf	PDF	Aug 5, 2026
Mechanical_Level_1_Tunnels.pdf	PDF	Aug 5, 2026
Mechanical_Controls_Combined.pdf	PDF	Aug 5, 2026
Electrical_Level_3.pdf	PDF	Aug 5, 2026
OCCC_Fire_Protection.pdf	PDF	Aug 5, 2026
Mechanical_Level_1_Combined.pdf	PDF	Aug 5, 2026
Electrical_Level_1.pdf	PDF	Aug 5, 2026

Show all 21

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

EF-4-05

KEF-3-02MS

KSF-3-02

KEF-3-03MS

KSF-3-03 KSF-3-04 KSF-3-05 KEF-3-07 KEF-3-06

KEF-3-05KEF-3-04

EF-3-06 EF-3-09

EF-4-06

KEF-3-01

EF-4

RTU-3-01 (E) RTU-3-02 (E)

1 1 1

2 2 2

1 1

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD301

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text 2018 SGM ENGINEERING, INC. DRAWINGS, WRITTEN MATERIAL, AND DESIGN CONCEPTS SHALL NOT BE USED OR REPRODUCED IN WHOLE OR PART IN ANY FORM OR FORMAT WITHOUT PRIOR WRITTEN CONSENT OF SGM ENGINEERING, INC. DO NOT SCALE DRAWINGS. USE GIVEN DIMENSIONS ONLY. IF NOT SHOWN, VERIFY CORRECT DIMENSIONS WITH THE ENGINEER. CONTRACTOR SHALL CHECK AND VERIFY ALL DIMENSIONS AND CONDITIONS AT JOB SITE.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

AutoCAD SHX Text 2023-070

EF-5/12 EF-6/12

EF-7/12 EF-8/12

EF-1/8

REF-1/122

REF-2/122 REF-3/122

REF-4/122

REF-5/122

EXISTING CAPPED CURB

SEF-4/11 SEF-3/11 SEF-2/8

REF-8/145 REF-7/145

REF-6/145 REF-5/145

EXISTING CAPPED CURB

1 1

1 1 1

2 2 2

1 1

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD302

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-2/7

EF-6/7

TDEF-1/7

EF-3/7

EF-4/7

EXISTING CAPPED CURB

REF-6/122 REF-7/122 REF-8/122

SEF-2/8 SEF-1/8

REF-3/145 REF-2/145 REF-1/145

EF-2/9 EF-2/8

EF-2/4

EF-2/5

EF-2/3

EF-2/2

EXISTING CAPPED CURB

1 1

1 1 1

2 2

1 1 1

1 1

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD303

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-2/8 EF-2/7-B

EF-2/5

EF-2/6

EF-2/2

EF-2/1

EF-5-02

EF-4-05

KEF-3-01

EF-5-4

RV-4-03

RV-4-01

1 1

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD304

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-5-01

EF-3-06 EF-3-09

EF-4-06

EF-5-9

EF-5-8

EF-5-10

EF-10-1-1 (PREVIOUSLY EF-10)

OAI-10 (E)

OAI-1 (E)

EF-13

OAI-7 (E)

EF-25

RV-4-02

EF-5-1

RV-4-04

PRIORITY 1

PRIORITY 2

V(E)

EF-4 EF-8 EF-9-1-1

2 2

2 2 2

2 2

2 2 2

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD305

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EXISTING TO REMAIN 54"x54"

DUCT THRU ROOF

EXISTING TO REMAIN

36"x36" O.A.

EXISTING TO REMAIN 42"x42"

O.A.

EXISTING TO REMAIN 54"x54"

DUCT THRU ROOF

EXISTING TO REMAIN 54"x54"

DUCT THRU ROOF

EXISTING TO REMAIN 46"x46"

O.A.

OAI-8 (E)

EF-26 EF-27

OAI-11 (E)

EF-1-1-3 (PREVIOUSLY EF-1)

SEF-3-1-3 (PREVIOUSLY SEF-3)

EF-36

EF-37

EF-35

V(E) V(E)

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD306

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EXISTING TO REMAIN

36"x36" O.A.

EXISTING TO REMAIN 54"x54"

DUCT THRU ROOF

EXISTING TO REMAIN 54"x54"

DUCT THRU ROOF

EXISTING TO REMAIN 54"x54"

DUCT THRU ROOF

EXISTING TO REMAIN 42"x42"

O.A.

EXISTING TO REMAIN 38"x38"

O.A.

EXISTING TO REMAIN 20"x20"

DUCT THRU ROOF

EF-38

EF-39

EF-40

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD307

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

REF-4/145

EF-14/10

SEF-1/10

SEF-2/10

EF-13/10

SEF-1/9

EF-16/10

EF-15/10

EF-17-10

KV-4/10

V(E)

V(E) V(E)

V(E)

PH-9/10(RA/SE)PH-9/13(RA/SE)

PH-9/14(RA/SE)

PH-9/11 (OAI)PH-9/12 (OAI)PH-9/15 (OAI)

PH-9/16 (OAI)

PH-10/5 (OAI)

PH-9/1(OAI/SE)

2 2 2 2 2

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD308

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

REF-3/145 REF-2/145 REF-1/145

EF-1-11 EF-1-3

SEF-2/9

SEF-10/9 EF-9/9

SEF-3/9

SEF-11/9

SEF-12-9

KV-3/9 KV-1/9

KV-2/9

SEF-4/9

SEF-5/9

KEF-1-01

EF-1-01

KEF-1-02

EF-1-07

V(E)

V(E) V(E)

PH-9/6 (OAI)

PH-9/7 (OAI)

PH-9/8(RA/SE)

PH-9/10(RA/SE)

PH-9/9 (OAI)

PH-9/2(OAI/SE)

V(E)

2 2

1 1

2 2

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD309

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-1-4 EF-1-5 EF-1-6

EF-1-08

EF-1-02

EF-5-11

EF-5-17

EF-5-12

KEF-5-01

KEF-5-02

V(E)

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD310

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-5-15EF-5-05

EF-5-13

EF-5-18

EF-5-14

EF-5-06 EF-5-07

SEF-7

EF-5-16

EF-16 EF-15

EF-14

EF-10-1-1 (PREVIOUSLY EF-10)

SE-1EF-3-1-1

EF-5-1-1 (PREVIOUSLY EF-5)

EF-2

EF-11-1-1 (PREVIOUSLY EF-11)

EF-8

EF-1-1-1 (PREVIOUSLY EF-1)

(E)VENT (E)VENTEF-13-1-1 (PREVIOUSLY EF-13,

EXISTING TAG EF-19)

V(E)

V(E) V(E)

V(E)

2 2

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD311

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-4

SEF-6

SEF-8

SEF-4-1-1 (PREVIOUSLY SEF-4)

EF-15

EF-14

SE-1

EF-5-1-1 (PREVIOUSLY EF-5)

EF-10-1-2 (PREVIOUSLY EF-10)

EF-12-1-1 (PREVIOUSLY EF-12) EF-3

EF-7EF-6

EF-11-1-1 (PREVIOUSLY EF-11)

EF-8 EF-9

SEF-1-1-1 (PREVIOUSLY SEF-1)

SEF-2-1-1 PREVIOUSLY (SEF-2)

SEF-3-1-1 (PREVIOUSLY SEF-3)

EXISTING MAKE-UP FOR EF-10-1-2

EF-17

EF-18

EF-19-1-1 (PREVIOUSLY EF-19)

EF-20-1-1 (PREVIOUSLY EF-20)EF-21-1-1 (PREVIOUSLY EF-21)

EF-22

EF-23 EF-24-1-1 (PREVIOUSLY EF-24)

GENERATOR 7

FUEL SYSTEM

SEF-2-1-3 (PREVIOUSLY SEF-2)

EF-11-1-2 (PREVIOUSLY EF-11) EF-12-1-2 (PREVIOUSLY EF-12)

OAI-2 (E)

SF-2

INTAKE OCCC P2

SF-1

EF-21-1-2 (PREVIOUSLY EF-21)

EF-24-1-2 (PREVIOUSLY EF-24)

EF-9

EF-20-1-2 (PREVIOUSLY EF-20)

EF-19-1-2 (PREVIOUSLY EF-19)

SEF-2-1-2 (PREVIOUSLY SEF-2)

SEF-1-1-2 (PREVIOUSLY SEF-1)

SAF-FEF-21 (E)

EF-42 (E)

EF-35A (E)

EF-20 (E)

SEF-5-1-1 (PREVIOUSLY SEF-5)

EF-1-1-2 (PREVIOUSLY EF-1)

PRIORITY 1

PRIORITY 2

AHU-RTU-2 (E)

V(E)

CAPPED CURB

V(E)

2 2

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD312

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

54x48

54x48 x4

BDBD

54x48

SEF-2-1-2 (PREVIOUSLY SEF-2)

SEF-1-1-2 (PREVIOUSLY SEF-1)

SEF-4-1-2 (PREVIOUSLY SEF-4)

SEF-3-1-2 (PREVIOUSLY SEF-3)

SEF-5-1-2 (PREVIOUSLY SEF-5)

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. DEMOLISH EXISTING HVAC CONTROLS.

POWER FOR CONTROLS REMAIN.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL DEMO ROOF PLAN

MD313

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-MD301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-5/12 EF-6/12

EF-7/12

EF-8/12

EF-1/8

REF-1/122

REF-2/122 REF-3/122

REF-4/122

1 REF-5/122

EXISTING CAPPED CURB

SEF-4/11

SEF-3/11

SEF-2/8

REF-8/145 REF-7/145

REF-6/145

REF-5/145

EXISTING CAPPED CURB

1 1

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. EXISTING HVAC EQUIPMENT TO REMAIN.

PROVIDE WITH NEW CONTROLS

REFERENCE CONTROL DRAWINGS FOR

SEQUENCE OF OPERATIONS AND

CONTROL DIAGRAMS. REUSE EXISTING

POWER FOR CONTROL UPGRADES.

CONTRACTOR TO CARRY A COST TO

REPLACE ALL DAMPERS ASSOCIATED

WITH EQUIPMENT TO BE REPLACED.

CONTRACTOR TO INSPECT ALL

DAMPERS AND REPLACE WHERE

REQUIRED. FIELD VERIFY EXISTING

CONDITION AND DIMENSIONS OF

DAMPERS AND SUBMIT TO OWNER AND

ENGINEER FOR APPROVAL, PRIOR TO

PURCHASE. CONTRACTOR SHALL

PROVIDE A CREDIT BACK TO THE

OWNER FOR DAMPERS NOT REPLACED.

CONTRACTOR TO REVIEW ALL FLOOR

PLANS, ENLARGED PLANS AND

CONTROLS DRAWINGS FOR LOCATIONS

AND ALL REQUIRED DEVICES.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL ROOF PLAN

M302

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-M301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-2/7 1

EF-6/7 1

TDEF-1/7

EF-3/7

EF-4/7

EXISTING CAPPED CURB

REF-6/122

REF-7/122

REF-8/122

SEF-2/8

SEF-1/8

REF-3/145

REF-2/145

REF-1/145

EF-2/9

EF-2/8

EF-2/4

EF-2/5

EF-2/3

EF-2/2

EXISTING CAPPED CURB

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER. DISRUPTION OF

COOLING TO THE ADJACENT SPACES

OR CAMPUS IS NOT ALLOWED.

C. DRAWINGS ARE DIAGRAMMATIC AND

REPRESENT THE GENERAL LAYOUT

OF MECHANICAL COMPONENTS, FOR

EXACT BUILDING DIMENSIONS SEE

ARCHITECTURAL AND STRUCTURAL

DRAWINGS.

D. CONTRACTOR SHALL FIELD VERIFY

EXISTING EQUIPMENT PRIOR TO

DEMO. EXISTING DRAWINGS ARE FOR

INFORMATION ONLY AND MAY NOT

DEPICT EXISTING CONDITIONS.

E. GENERAL CONTRACTOR SHALL PATCH

AND SEAL ALL WALL, FLOOR AND

ROOF HVAC PENETRATIONS THAT

ARE NO LONGER BEING USED DUE TO

THIS SCOPE OF WORK.

F. ALL HVAC EQUIPMENT SHALL REMAIN

PROPERTY OF THE OWNER. ALL

SHEET METAL AND PIPING WILL BE

DISPOSED BY THE GENERAL

CONTRACTOR.

G. ALL EXISTING DUCTWORK TO BE

REUSED SHOULD BE

PROFESSIONALLY CLEANED.

H. ALL EXISTING FIRE/SMOKE DAMPERS

TO BE FIELD VERIFIED AND CONFIRM

THAT THEY ARE WORKING PROPERLY.

OTHERWISE, REPLACE AS REQUIRED.

I. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE

EQUIPMENT THAT IS TAKEN OUT OF

SERVICE ON OCCC PROVIDED ASSET

TRACKING FORM.

J. THE CONTRACTOR IS RESPONSIBLE

FOR DOCUMENTING ALL THE NEW

EQUIPMENT THAT IS TO BE INSTALLED

ON OCCC PROVIDED ASSET

TRACKING FORM.

K. PROVIDE PIPE FREEZE ON CHILLED

WATER UP TO THE EXISTING

ISOLATION VALVES. ONCE

REPLACEMENT IS COMPLETE,

ENSURE THAT THE OLD ISOLATION

VALVES AND CONTROL VALVES ARE

REMOVED AND NEW ONES ARE

INSTALLED.

PLAN KEY NOTES:

1. EXISTING HVAC EQUIPMENT TO REMAIN.

PROVIDE WITH NEW CONTROLS

REFERENCE CONTROL DRAWINGS FOR

SEQUENCE OF OPERATIONS AND

CONTROL DIAGRAMS. REUSE EXISTING

POWER FOR CONTROL UPGRADES.

CONTRACTOR TO CARRY A COST TO

REPLACE ALL DAMPERS ASSOCIATED

WITH EQUIPMENT TO BE REPLACED.

CONTRACTOR TO INSPECT ALL

DAMPERS AND REPLACE WHERE

REQUIRED. FIELD VERIFY EXISTING

CONDITION AND DIMENSIONS OF

DAMPERS AND SUBMIT TO OWNER AND

ENGINEER FOR APPROVAL, PRIOR TO

PURCHASE. CONTRACTOR SHALL

PROVIDE A CREDIT BACK TO THE

OWNER FOR DAMPERS NOT REPLACED.

CONTRACTOR TO REVIEW ALL FLOOR

PLANS, ENLARGED PLANS AND

CONTROLS DRAWINGS FOR LOCATIONS

AND ALL REQUIRED DEVICES.

2. EXISTING CONTROLS TO REMAIN.

3. FAN MONITORED BY BAS ONLY.

MECHANICAL ROOF PLAN

M303

OCCC West Building BAS & HVAC Upgrades

Orange County Convention Center

P. O. Box 691509 Orlando, Florida

32869

AutoCAD SHX Text

KEY PLAN:

AutoCAD SHX Text N

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Issue:

AutoCAD SHX Text Description

AutoCAD SHX Text Date

AutoCAD SHX Text No.

AutoCAD SHX Text Seal:

AutoCAD SHX Text Engineer of Record:

AutoCAD SHX Text License Number:

AutoCAD SHX Text Drawn By:

AutoCAD SHX Text Checked By:

AutoCAD SHX Text 2023-070

AutoCAD SHX Text Sheet Name:

AutoCAD SHX Text Project Number:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Project Name:

AutoCAD SHX Text Client Name:

AutoCAD SHX Text

1500-M301-2023070.DWG

AutoCAD SHX Text Drawing File Name:

AutoCAD SHX Text Design By:

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 02-7-2025 100%%% CDs

AutoCAD SHX Text

EF-2/8

EF-2/7-B

EF-2/5

EF-2/6

EF-2/2

EF-2/1

EF-5-02

EF-4-05

KEF-3-01

EF-5-4

RV-4-03

RV-4-01

GENERAL NOTES:

A. REFER TO SHEET M-001 FOR

MECHANICAL GENERAL NOTES AND

SYMBOLS LEGEND.

B. COORDINATE WORK SCHEDULE WITH

PROJECT MANAGER.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 10, 2026.