Att 010 21R1909 QAs_Amendment 0001.pdf

Question Response Amendment No.

Could you please elaborate on why Gore’s WGLT is required for testing when the test is intended to evaluate hand wear using Gore products?

Gore's Whole Glove Leak Tester is not required for testing. The apparatus is listed as a known source in section 6.5, Sources of Supply, to test waterproof end items; however, there is no requirement that this is the apparatus used. 1

Is your team open to evaluating submissions that are not seam sealed and utilize a Gore insert as well?

No, the Trigger Finger Mitten Shell shall be constructed using a waterproof Nylon Taslan then seam taped on the inside seams to provide full waterproofing as stated in paragrpah 3.5 of MIL-TFM-

003. 1

In order to provide prospective small business bidders with reasonable time to produce the PDMs and prepare comprehensive Technical Proposal documents, we respectfully request that the offer closing date be extended to 30 days after the solicitation was issued, which would be 6/25/2021. No, we will extend until 24 June 2021. 1

Can the proposal submission date be extended from from 14 June to 12 July? No, we will extend until 24 June 2021. 1

Can we use incorrect colors for certain findings and trims for the proposal submission samples? Rationale:

For certain findings and trims we were unable to source coyote colored product.

Yes, incorrect colors for findings and trims will be allowed for the PDMs. 1

We are using a somewhat off brand pattern software that unfortunately doesn't support all of the features of Accumark. Would it be possible for you to forward the piece list for the liner as a PDF like you sent for the shell?

Yes. A piece list for the liner is attached as Attachment

009. 1

M67854-21-R-1909 Questions and Answers