Exhibit_B_Performance_Specification_Matrix.xlsx

XLSX spreadsheet 15 KB Posted Feb 16, 2018

Attached to: Integrated Marking Carts (IMC) Federal contract opportunity
Solicitation number: M67854-18-Q-7606
Issued by: United States Marine Corps

About this file

From the source

Exhibit B - Performance Specification Matrix

View the file

Other files for this federal contract opportunity

Other files attached to Integrated Marking Carts (IMC), newest first.
File	Type	Posted
Attachment_1_Statement_of_Work_v2.pdf	PDF	Mar 15, 2018
Attachment_4_QandA.pdf	PDF	Mar 15, 2018
RFQ_M67854-18-Q-7606-0002_Q&A.docx	DOCX document	Mar 15, 2018
RFQ_M67854-18-Q-7606-00001.docx	DOCX document	Mar 8, 2018
RFQ_M67854-18-Q-7606.docx	DOCX document	Feb 16, 2018
Attachment_3_Source_of_Repair_Instructions.pdf	PDF	Feb 16, 2018
Attachment_2_Warranty_Tracking_Information.pdf	PDF	Feb 16, 2018
Attachment_1_Statement_of_Work.pdf	PDF	Feb 16, 2018
IMC_Brand_Name_Justification.pdf	PDF	Feb 16, 2018
Exhibit_D_CDRL.pdf	PDF	Feb 16, 2018

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1

	Government Performance Specification	Vendor Quoted Performance Specification	Meets?
YES / NO	Rationale
	1. IMC	To be completed by vendor	To be completed by government
	1.1. General purpose laptop computer
	1.1.1. Microsoft Windows 10 operating system (Enterprise edition) (including license)
	1.1.2. Microsoft Office Professional Plus 2016 32/64 bit (including license)
	1.1.3. BarTender software (Enterprise Automation 10.1, 3 printer edition) (including license)
	1.1.4. Minimum 500 GB (7200 RPM SATA HDD installed)
	1.1.5. Minimum 8GB DDR3 160 MHz
	1.1.6. Minimum 6-hour battery
	1.1.7. Minimum Intel HD graphics 5500 card
	1.1.8. Minimum i5-5300u (2.90 GHz, 3MB) processor
	1.1.9. Common Access Card (CAC) reader
	1.1.10. Trade Agreement Act compliant (19 U.S.C. 2501 and 19 U.S.C. 2512)
	1.1.11. EPEAT® bronze-registered or higher (FAR 23.7)
	1.1.12. Operable on standard 120 volt, 20 amp, 60 Hz electrical service
	1.2. Dual-source flatbed laser marking system
	1.2.1. Includes both fiber/YAG and CO2 lasers within the same cabinet
	1.2.2. Fiber/YAG laser power rating (min-max) 20 - 30 watts
	1.2.3. CO2 laser power rating (min-max) 40 - 50 watts
	1.2.4. Operable on standard 120 volt, 20 amp, 60 Hz electrical service
	1.2.5. Designated as a class 2M laser (or safer) with respect to the ANSI Z136.1-2014 standard by the Center for Devices and Radiological Health
	1.2.6. Working area range 24-48” (min-max) x 12-24” (min-max)
	1.2.7. Includes rotary tool attachment (for marking cylindrical items)
	1.2.8. All software, firmware, cables, connectors, drivers, essential accessories to make the laser operational and able to produce ECC200 Data Matrix symbols
	1.2.9. Minimum 600 dots per inch (dpi) resolution for each laser
	1.2.10. Filter and air-handling equipment allowing operation indoors (without venting outside)
	1.2.11. Interface with BarTender software (in particular, to allow use of the BarTender templates the USMC has already developed to support its IUID effort)
	1.2.12. A spare, replacement lens
	1.2.13. Cutting table (same size as the working area (Ref 1.2.6 above))
	1.2.14. Motor brush
	1.2.15. Two sets of replacements for consumable components of each of the filtering system(s)
	1.3. Desktop thermal transfer barcode printer
	1.3.1. Minimum print resolution of 600 dpi
	1.3.2. Operable on 120 volt, 20 amp, 60 Hz electrical service
	1.3.3. Interface with BarTender software (in particular, to allow use of the BarTender templates the USMC has already developed to support its IUID effort)
	1.3.4. Able to print on 4” wide label stock
	1.3.5. Able to handle label stock rolls with 8” outside diameter (or greater) and 3” core (or smaller)
	1.3.6. All software, firmware, cables, connectors, drivers, essential accessories to make the printer operational and able to produce ECC200 Data Matrix symbols
	1.4. Data Matrix verifier
	1.4.1. Able to support MIL-STD-130N Change 1 section 5.2.7.2.1 acceptance criteria for IUID marking (both high contrast black/white label marking and low contrast direct part marking)
	1.4.2. Operable on 120 volt, 20 amp, 60 Hz electrical service
	1.4.3. Can be calibrated using a GS1 US Calibrated Conformance Standard Test Card
	1.4.4. Able to verify Data Matrix symbols up to 1” square
	1.4.5. Able to validate the data encoded within a Data Matrix symbol to ensure conformance with DoD IUID policies (a.k.a. validation)
	1.4.6. Provides an auditable electronic record of verified marks (digital image of the mark, encoded data within the mark, date of verification, results of mark quality verification, and results of data conformance with MIL-STD-130N)

&"-,Bold"&22Exhibit B - Performance Specification Matrix

&P of &N

Sheet2

Sheet3

File details come from the government source that posted it.