CDRL_A032_Attachment.pdf

* LOGISTICS PRODUCT DATA DELIVERABLE:_A032 MEU(S0C)______________________________ *

* This worksheet is used to select data deemed necessary by the government. *

* Data should be used to feed downstream government processes. *

* SELECT EXPLANATION *

* X Data product required on all items *

* A As applicable *

* T Registered Support Equipment Only *

* U Non-Registered Support Equipment Only *

* R Repairables only *

* P All “P” source code items *

* N New “P” source code items *

* Y National Stock Number items *

* O “Ref” items only *

* F First appearance items only *

* C COTS items *

* I NDI items *

* D Developmental items *

* L LRU/WRA items *

* S SRA/SRU items *

* M Packaging, Common items *

* B Packaging, Bulk items *

* E Support Equipment *

* NOTE: Other codes may be assigned by the program office as identified below. *

* Program specific selections and explanations. *

DATE PRODUCT TITLE

SELECT

ADDITIONAL INFORMATION

ALLOWANCE ITEM CODE (AIC)

X

ALLOWANCE ITEM QUANTITY

ALTERNATE INDENTURED PRODUCT CODE (AIPC)

ALTERNATE IPC - UUT

AUTOMATIC DATA PROCESSING EQUIPMENT CODE

BASIS OF ISSUE (BOI)

QUANTITY AUTHORIZED (QTY-AUTH)

END ITEM

LEVEL

CONTROL

CALIBRATION AND MEASUREMENT REQUIREMENTS

SUMMARY RECOMMENDED

E

Support Equipment Only

CALIBRATION INTERVAL

CALIBRATION ITEM

CALIBRATION PROCEDURE

CALIBRATION REQUIRED

CALIBRATION TIME

CHANGE AUTHORITY NUMBER

CLEANING AND DRYING PROCEDURE

A

As Required, if any

COMMERCIAL AND GOVERNMENT ENTITY (CAGE)

CODE

CAGE of actual vendor/preferred source as indicated in FLIS, unless the item has been modified or altered.

CAGE CODE - ADAPTER INTERCONNECTOR

DEVICE

CAGE CODE - ARN

CAGE CODE - ARN ITEM

CAGE CODE - ARTICLES REQUIRING SUPPORT

CAGE CODE - ATE

CAGE CODE - CATEGORY III SE

CAGE CODE - CTIC

CAGE CODE - PACKAGING DATA PREPARER

CAGE CODE - SUPPORT EQUIPMENT

CAGE CODE - TEST PROGRAM SET

CAGE CODE - UUT

CONTRACTOR FURNISHED EQUIPMENT/

GOVERNMENT FURNISHED EQUIPMENT (CFE/GFE)

GFE items are indicated by PLCC

CONTRACTOR RECOMMENDED

CONTRACTOR RECOMMENDED - DDCC

CONTRACTOR RECOMMENDED - IRCC

CONTRACTOR TECHNICAL INFORMATION CODE

(CTIC)

CONTROLLED INVENTORY ITEM CODE

CRITICALITY CODE

CUSHIONING AND DUNNAGE MATERIAL CODE

CUSHIONING THICKNESS

DEGREE OF PROTECTION CODE

DEMILITARIZATION CODE (DMIL)

DEMIL code resident in FLIS for

NSN’d items (or) system Developer’s/

Integrator’s recommended DEMIL code based upon DoD 4160.21-M-1.

DESCRIPTION/FUNCTION AND CHARACTERISTICS

OF SUPPORT EQUIPMENT

DESIGN DATA CATEGORY CODE

DESIGN DATA PRICE

END ITEM ACRONYM CODE (EIAC)

ESSENTIALITY CODE

ESTIMATED PRICE

ESTIMATED PRICE - DDCC

ESTIMATED PRICE - IRCC

FIGURE NUMBER

FRAGILITY FACTOR

FUNCTIONAL ANALYSIS

FUNCTIONAL GROUP CODE

HARDNESS CRITICAL ITEM (HCI)

HARDWARE DEVELOPMENT PRICE

HAZARDOUS CODE

As Applicable

INDENTURE CODE

Option 4 as noted below

ATTACHING PART/HARDWARE

OPTION 1

OPTION 2

OPTION 3

OPTION 4

OPTION 5

INDENTURE FOR KITS

INDENTURE CODE - IPC

INDENTURED PRODUCT CODE (IPC)

INDENTURED PRODUCT CODE (IPC) - UUT

INPUT POWER SOURCE

OPERATING RANGE - MINIMUM

OPERATING RANGE - MAXIMUM

ALTERNATING CURRENT/DIRECT CURRENT

FREQUENCY RANGE - MINIMUM

FREQUENCY RANGE - MAXIMUM

PHASE

WATTS

PERCENT MAXIMUM RIPPLE

INSTALLATION FACTORS OR OTHER FACILITIES

INTEGRATED LOGISTIC SUPPORT PRICE

INTEGRATED LOGISTIC SUPPORT REQUIREMENTS

CATEGORY CODE

INTERCHANGEABILITY CODE

INTERMEDIATE CONTAINER CODE

INTERMEDIATE CONTAINER QUANTITY

ITEM CATEGORY CODE (ICC)

ITEM DESIGNATOR CODE

ITEM DESIGNATOR - END ARTICLE

ITEM DESIGNATOR - GOVERNMENT

ITEM NAME

Approved item name as resident in FLIS/FEDLOG for items already assigned an NSN

ITEM NAME - ARTICLE REQUIRING SUPPORT

ITEM NAME - SE

ITEM NAME CODE

ITEM NUMBER

JULIAN DATE - SPI NUMBER

LINE REPLACEABLE UNIT (LRU)

LOT QUANTITY

FROM

TO

MAINTENANCE ACTION CODE (MAC)

MAINTENANCE REPLACEMENT FACTOR (MRF)

MRF - DEPOT LEVEL REPAIRABLES

MRF - FIELD LEVEL REPAIRABLES

MRF - CONSUMABLES

MAINTENANCE REPLACEMENT RATE I (MRRI)

MAINTENANCE REPLACEMENT RATE II (MRRII)

MAINTENANCE TASK DISTRIBUTION

MATERIAL

MATERIAL LEADTIME

MATERIAL WEIGHT

MAXIMUM ALLOWABLE OPERATING TIME (MAOT)

MEAN TIME BETWEEN FAILURES (MTBF)

MEAN TIME BETWEEN FAILURES (MTBF) -

SUPPORT EQUIPMENT

MEAN TIME TO REPAIR (MTTR)

MEAN TIME TO REPAIR (MTTR) - SE

MEASUREMENT BASE (MB)

MEASUREMENT BASE - MEAN TIME BETWEEN

FAILURES

MEASUREMENT BASE - MEAN TIME BETWEEN

FAILURES - SUPPORT EQUIPMENT

MEASUREMENT BASE - WEAROUT LIFE

METHOD OF PRESERVATION

MOBILE FACILITY CODE

NATIONAL STOCK NUMBER - CONTAINER

Shipping Container

FEDERAL SUPPPLY CLASSIFICATION

NATIONAL ITEM IDENTIFICATION NUMBER

NATIONAL STOCK NUMBER

Prime (preferred) NSN, if applicable

COGNIZANCE CODE

MATERIEL CONTROL CODE

FEDERAL SUPPLY CLASSIFICATION

NATIONAL ITEM IDENTIFICATION NUMBER

SPECIAL MATERIEL IDENTIFICATION CODE/

MATERIEL MANAGEMENT AGGREGATION CODE

ACTIVITY CODE

NEXT HIGHER ASSEMBLY PROVISIONING LIST

ITEM SEQUENCE NUMBER (NHA PLISN)

NEXT HIGHER ASSEMBLY PROVISIONING LIST

ITEM SEQUENCE NUMBER INDICATOR (NHA IND)

NOT REPARABLE THIS STATION (NRTS)

OPERATOR'S MANUAL

OPTIONAL PROCEDURE INDICATOR

OVERHAUL REPLACEMENT RATE (ORR)

PACKAGING CATEGORY CODE

PACKING CODE

PARAMETERS

INPUT/OUTPUT CODE - CATEGORY III SE

PARAMETER - CATEGORY III SE

RANGE FROM - CATEGORY III SE

RANGE TO - CATEGORY III SE

ACCURACY - CATEGORY III SE

RANGE/VALUE CODE - CATEGORY III SE

INPUT/OUTPUT CODE - SUPPORT EQUIPMENT

PARAMETER - SUPPORT EQUIPMENT

RANGE FROM - SUPPORT EQUIPMENT

RANGE TO - SUPPORT EQUIPMENT

ACCURACY - SUPPORT EQUIPMENT

RANGE/VALUE CODE - SUPPORT EQUIPMENT

INPUT/OUTPUT CODE - UUT

PARAMETER - UUT

RANGE FROM - UUT

RANGE TO - UUT

ACCURACY - UUT

RANGE/VALUE CODE - UUT

OPERATIONAL/SPECIFICATION PARAMETER

PASS THROUGH PRICE

PRECIOUS METAL INDICATOR CODE (PMIC)

PREPARING ACTIVITY

PRESERVATION MATERIAL CODE

PRIOR ITEM PROVISIONING LIST ITEM

SEQUENCE NUMBER (PRIOR ITEM PLISN)

PRODUCTION LEAD TIME (PLT)

PROGRAM PARTS SELECTION LIST (PPSL)

PRORATED EXHIBIT LINE ITEM NUMBER

(PRORATED ELIN)

PRORATED ELIN QUANTITY

PROVISIONING CONTRACT CONTROL NUMBER

(PCCN)

PROVISIONING LIST CATEGORY CODE (PLCC)

PROVISIONING LIST ITEM SEQUENCE NUMBER

(PLISN)

PROVISIONING NOMENCLATURE

Nomenclature on engineering drawing.

PROVISIONING PRICE CODE

PROVISIONING REMARKS

QUANTITY PER ASSEMBLY (QPA)

QUANTITY PER ASSEMBLY/QUANTITY PER END

ITEM INDICATOR

QUANTITY PER END ITEM (QPEI)

Exclusive of embedded items in GFE/COTS that are not already apparent to the system Developer/Integrator

QUANTITY PER FIGURE

QUANTITY PER TEST

QUANTITY PER UNIT PACK

QUANTITY PROCURED

QUANTITY SHIPPED

RECOMMENDED MINIMUM SYSTEM STOCK LEVEL

RECURRING COST

REFERENCE DESIGNATION

OPTION 4

OPTION 5

REFERENCE DESIGNATION CODE (RDC)

REFERENCE NUMBER

Actual vendor’s reference number or preferred part number as noted in FLIS, unless the item has been modified or altered. Please list all part numbers.

REFERENCE NUMBER - AID

REFERENCE NUMBER - ARN ITEM

REFERENCE NUMBER - ARTICLES REQUIRING

SUPPORT

REFERENCE NUMBER - AUTOMATIC TEST

EQUIPMENT

REFERENCE NUMBER - CATEGORY III SE

REFERENCE NUMBER - SUPPORT EQUIPMENT

REFERENCE NUMBER - TPS

REFERENCE NUMBER - UUT

REFERENCE NUMBER (ARN) - ADDITIONAL

REFERENCE NUMBER CATEGORY CODE (RNCC)

REFERENCE NUMBER CATEGORY CODE - ARN

REFERENCE NUMBER VARIATION CODE (RNVC)

REFERENCE NUMBER VARIATION CODE - ARN

REPAIR CYCLE TIME

REPLACED OR SUPERSEDING PROVISIONING LIST

ITEM SEQUENCE NUMBER

REPLACED OR SUPERSEDING PROVISIONING LIST

ITEM SEQUENCE NUMBER INDICATOR (RS/IND)

REPLACEMENT TASK DISTRIBUTION

REVISION

REVISION - SERD

REWORK REMOVAL RATE (RRR)

ROTATABLE POOL FACTOR (RPF)

SAME AS PROVISIONING LIST ITEM SEQUENCE

NUMBER (SAME AS PLISN)

“One line entry”. (SMR codes may be different than the first time occurrence.)

SCOPE

SCOPE - DDCC

SCOPE - IRCC

SERIAL NUMBER EFFECTIVITY

SERIAL NUMBER EFFECTIVITY - FROM

SERIAL NUMBER EFFECTIVITY - TO

SERVICE DESIGNATOR CODE (SER)

SERVICE DESIGNATOR CODE - SE

SERVICE DESIGNATOR CODE - USING

SHELF LIFE (SL)

SHELF LIFE ACTION CODE (SLAC)

SKILL SPECIALTY CODE FOR SUPPORT

EQUIPMENT OPERATOR

SOURCE, MAINTENANCE AND RECOVERABILITY

(SMR) CODE

System Developer/Integrator’s recommended SMRC based upon system maintenance concept and application. End items (SAC 3) shall not be assigned SMR

Codes. Reference MCO 4400.120A

SOURCE, MAINTENANCE AND RECOVERABILITY

CODE - SE

SPARES ACQUISITION INTEGRATED WITH

PRODUCTION (SAIP)

SPECIAL MAINTENANCE ITEM CODE (SMIC)

SPECIAL MARKING CODE

SPECIAL MATERIAL CONTENT CODE (SMCC)

SPECIAL PACKAGING INSTRUCTION NUMBER

SPECIAL PACKAGING INSTRUCTION (SPI)

NUMBER REVISION

SUPPLEMENTAL PACKAGING DATA

SUPPORT EQUIPMENT DIMENSIONS

SE DIMENSIONS OPERATING

LENGTH

WIDTH

HEIGHT

SE DIMENSIONS SHIPPING

SE DIMENSIONS STORAGE

SUPPORT EQUIPMENT EXPLANATION

SUPPORT EQUIPMENT RECOMMENDATION DATA

NUMBER (SERD NUMBER)

As applicable for unregistered SE

SUPPORT EQUIPMENT RECOMMENDATION DATA

REVISION/SUPERSEDURE REMARKS

SUPPORT EQUIPMENT WEIGHT

SUPPORT EQUIPMENT WEIGHT - OPERATING

SUPPORT EQUIPMENT WEIGHT - SHIPPING

SUPPORT EQUIPMENT WEIGHT - STORAGE

TECHNICAL MANUAL CHANGE NUMBER (TM CHG)

TECHNICAL MANUAL INDENTURE CODE (TM IND)

TECHNICAL MANUAL NUMBER

TEST ACCURACY RATIO (TAR)

TEST ACCURACY RATIO - CATEGORY III SE

TEST ACCURACY RATIO - UUT PARAMETER

TOTAL ITEM CHANGES (TIC)

TOTAL QUANTITY RECOMMENDED

TYPE EQUIPMENT CODE

TYPE OF CHANGE CODE (TOCC)

TYPE OF PRICE CODE

TYPE OF STORAGE CODE

UNIT CONTAINER CODE

UNIT CONTAINER LEVEL

UNIT OF ISSUE (UI)

UNIT OF ISSUE CONVERSION FACTOR (UI

CONVERSION FACTOR)

UNIT OF ISSUE/UNIT OF MEASURE CODE

UNIT OF ISSUE/UNIT OF MEASURE PRICE

(UI/UM PRICE)

Required entry for SMRC “P” coded items only. For items already assigned an NSN, the Unit of Issue price indicated in FLIS.

UNIT OF MEASURE (UM)

UNIT OF MEASURE - SE DIMENSIONS

OPERATING

UNIT OF MEASURE - SE WEIGHT

OPERATING

STORAGE

STORAGE

SHIPPING

SHIPPING

UNIT PACK CUBE

UNIT SIZE

UNIT SIZE - LENGTH

UNIT SIZE - WIDTH

UNIT SIZE - HEIGHT

UNIT SIZE - PACK LENGTH

UNIT SIZE - PACK WIDTH

UNIT SIZE - PACK DEPTH

UNIT UNDER TEST EXPLANATION

UNIT WEIGHT

UNIT WEIGHT - PACK

USABLE ON CODE (UOC)

USABLE ON CODE - DESIGN CHANGE

USABLE ON CODE - SUPPORT EQUIPMENT

WEAROUT LIFE

WORK UNIT CODE

WORK UNIT CODE - ARTICLES REQUIRING

SUPPORT

WRAPPING MATERIAL

Special Guidance Notes

1. GFE to be entered in PPL as a “One Line Entry”. (EDFP is not required for GFE.)

2. COTS items shall be represented by all data requirements of the PPL and accompanied by EDFP (ILDR) as available. Performance Specifications are

PREFERRED for COTS items. {Reference Data Item Description DI-SESS-81874 dtd 7 Dec 2012 for EDFP}

3. Manufactured Cable Assemblies shall be represented as assemblies along with their sub-indentured component parts in both the PPL and EDFP.

4. Modified and Altered items shall be indicated as the preferred Part Number/CAGE in the PPL and supported by appropriate EDFP.

5. Screening (using either FLIS or FedLog) is required. The referred/primary

Reference Number (CAGE & Part Number) shall be entered as the first reference entry. Additional Reference Numbers (the Reference Number of the item used in the system’s design) are desired to be entered, if applicable