Attachment_5_Types_of_Inorganics.xlsx
XLSX spreadsheet 12 KB Posted
- Attached to
- Laboratory Testing Services Federal contract opportunity
- Solicitation number
- M0026416T0156
- Issued by
- United States Marine Corps
About this file
Attachment 5
View the file
Other files for this federal contract opportunity
Show all 23
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1 12VAC5-590-440. Analytical methods.
| All drinking water analyses for compliance purposes shall have been performed by analytical methods that are consistent with current U.S. Environmental Protection Agency regulations found at 40 CFR 141 and 40 CFR Part 143. Laboratories seeking certification to perform drinking water analyses shall comply with all applicable regulations promulgated by the Department of General Services, Division of Consolidated Laboratory Services.Testing for alkalinity, calcium, conductivity, disinfectant residual, orthophosphate, pH, silica, temperature, and turbidity for compliance purposes may be performed by any person or party to the commissioner. | |
| Table 2.2 ― Inorganic Chemicals. | |
| Substance | Primary Maximum Contaminant Level (mg/L) |
| Antimony | 0.006 |
| Arsenic (As) | 0.010*** |
| Asbestos | 7 Million Fibers/Liter (longer than 10 um) |
| Barium (Ba) | 2 |
| Beryllium | 0.004 |
| Cadmium (Cd) | 0.005 |
| Chromium (Cr) | 0.1 |
| Cyanide (as free Cyanide) | 0.2 |
| Fluoride (F) | 4.0 # |
| Mercury (Hg) | 0.002 |
| Nickel | No Limits Designated |
| Nitrate (as N) | 10** |
| Nitrite (as N) | 1 |
| Total Nitrate and Nitrite (as N) | 10 |
| Selenium (Se) | 0.05 |
| Thallium | 0.002 |
| Substance | Secondary Maximum Contaminant Level (mg/L) |
| Chloride (Cl) | 250 |
| Copper (Cu) | 1 |
| Corrosivity | Noncorrosive, See Appendix B |
| Fluoride | 2 |
| Foaming Agents | 0.5* |
| Iron (Fe) | 0.3 |
| Manganese (Mn) | 0.05 |
| Sodium (Na) | No Limits Designated |
| Sulfate (SO4) | 250 |
| Zinc (Zn) | 5 |
| Substance | Action Level (mg/L) |
| Lead (Pb) | 0.015 |
| Copper (Cu) | 1.3 |
| # Note. For artificially fluoridated waterworks the minimum concentration of fluoride should be 0.8 mg/L and the maximum should be 1.0 mg/L. The optimum control limit is 0.9 mg/L. (See Appendix B) | |
| *Note. Concentration reported in terms of Methylene Blue Active Substances. | |
| **Note. See Appendix B for Exception Regarding Noncommunity Waterworks. | |
| ***Note. The PMCL for arsenic is 0.010 mg/L for community and nontransient noncommunity waterworks effective January 23, 2006. Arsenic sampling results shall be reported to the nearest 0.001 mg/L. |
File details come from the government source that posted it. Updated .