M-102.pdf
PDF 1 MB Posted
- Attached to
- Mims Water Treatment Plant Mixing Improvement
- Solicitation number
- B-7-25-41
- Issued by
- Brevard County, Miramar Beach CDP, Florida
About this file
The document M-102 is a mechanical plan and section drawing for the Brevard County Utilities Mims Water Treatment Plant (WTP) Mixing Improvements project, prepared by Black & Veatch Corporation. The drawing provides detailed schematics for the Chlorine Contact Basin No. 2, showing lower and operating level mechanical plans and a section view. The plan includes specific technical details such as new mixer installations, pipe replacements, valve locations, and elevation markings across four distinct zones. Key modifications include installing new 12-inch and 10-inch ductile iron pipes (DIP), a new flow meter, chlorine and ammonia piping, access hatch doors, and side-mounted handrails. The drawing is marked as a 90% submittal and not for construction, with an addendum issued on April 25th indicating ongoing design refinements.
The technical drawing specifies several critical implementation notes, including replacing existing ammonia piping, installing chlorine solution pipes along the east wall of the chlorine contact chamber, and relocating sampling pipes. The contractor is required to follow specific specification sections for pipe support requirements and construction sequencing. Additional requirements include using Halliday access hatch doors, filling existing handrail support anchor holes with Sika Armatec 110 Epocem or an approved equal, and ensuring all work conforms to the project's construction sequence specifications. The drawing provides precise measurements, elevation details, and structural positioning of new equipment, demonstrating a comprehensive approach to upgrading the water treatment plant's mixing infrastructure.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
EXISTING
1" CS
EXISTING
DRAIN
EXISTING
CO2 DIFFUSER
M-102 M-102
NEW 12" DIP
CL EL 45.42'
LINK SEAL B
M-501
LINK SEAL
NEW CL2
DIFFUSER
B M-501
EXISTING ADJUSTABLE
WEIR GATE
ZONE 4
ZONE 3 ZONE 2 ZONE 1
C M-501
VALVE BOX
EXISTING
6" pH SENSER CONN
EXISTING HATCH
TO REMAIN
M-102
M-102
EXISTING
HANDRAIL (TYP)
EXISTING
SAMPLING
PUMP
EXISTING FILTER
FLOW INDICATOR
EXISTING
ADJUSTABLE
WEIR GATE
RELOCATED
SAMPLING PIPE
(NOTE 4)
NEW 1/2" CPVC
AMMONIA PIPE
(NOTE 5)
RELOCATED EXISTING
pH TRANSMITTER
NEW ACCESS
HATCH DOOR
(NOTE 7)
HB
1" PW
MIXER
MIXER SUPPORT MIXER
MIXER SUPPORT
REMOVABLE ENCLOSUREA
M-501
A M-501
REMOVABLE ENCLOSURE
MXP-202
MXP-201
NEW
10" DIP
CL EL 45.42'
NEW 10"
FLOW METER
EL 48.95'
EL 37.20'
3' -1
2' -2
6"
NEW
MIXER
CL
MIXER SUPPORT
STRUCTURE (TYP)
6' -9
NEW
MIXER
CL
8'-4"±
4'-6"
2' -1
4' -9
1/2" PE AMMONIA
PIPE (NOTE 2)
NEW 1" CPVC
CHLORINE
(NOTE 3)
EL 48.45'
CL EL 29.23'
CL EL 47.95'
LINK SEAL B
M-501
EL 36.41'
NEW 12" x 10"
REDUCING 90°
BEND (FLG)
NEW 12" x 10"
REDUCING BEND
(MECHANICAL JOINT)
CL EL 41.20'
NEW SIDE MOUNTED
HANDRAIL, SEE DWG S-503
ZONE 4
ZONE 3
ZONE 2
ZONE 1
A M-501
REMOVABLE ENCLOSURE
REMOVABLE ENCLOSURE
NEW 10"
GATE VALVE
CL EL 34.20'
A M-501
EL = 44.71'
NEW
12" DIP
3' -1
0"
3' -0
MIXER MOTOR
MIXER MOTOR
MXP-202
MXP-201
NEW ACCESS
HATCH DOOR
(NOTE 7)
GV-3
(NOTE 8)
NOTES:
1. REPLACE EXISTING AMMONIA PIPING WITH NEW
PIPING OF THE SAME SIZE AND CONFIGURATION
AS THE EXISTING.
2. INSTALL 1" CHLORINE SOLUTION PIPE ALONG
THE INSIDE OF THE CHLORINE CONTACT
CHAMBER EAST WALL. REFER TO
SPECIFICATION SECTION 15140 FOR PIPE
SUPPORT REQUIREMENTS.
3. RELOCATE SAMPLING PIPE ALONG THE OUTSIDE
WALL. REFER TO SPECIFICATION SECTION 15140
FOR PIPE SUPPORT REQUIREMENTS.
CONTRACTOR TO COORDINATE PIPE
INSTALLATION WITH HANDRAIL WALL SUPPORTS.
4. REPLACE EXISTING 1/2" AMMONIA PIPE FROM
GROUND ELEVATION UP TO EXISTING PIPE
PENETRATION.
5. WORKS ASSOCIATED WITH THE IMPROVEMENTS
TO CHLORINE CONTACT CHAMBER NUMBER 2
SHALL CONFORM TO REQUIREMENTS OF
SPECIFICATION 01900 CONSTRUCTION
SEQUENCE.
6. CONTRACTOR SHALL SUPPLY AND INSTALL
HALLIDAY ACCESS HATCH DOOR (PART NUMBER
030030CBD-C).
7. FILL EXISTING HANDRAILS SUPPORT ANCHOR
HOLES SIKA ARMATEC 110 EPOCEM OR
APPROVED EQUAL.
12" 6" 0 7'6'5'4'3'2'1'
3/8"=1'-0"
SEE DRAWING
C-101 FOR
CONTINUATION
SECTION1
- 3/8" = 1'-0"
LOWER LEVEL - MECHANICAL PLAN
3/8" = 1'-0"
OPERATING LEVEL - MECHANICAL PLAN
3/8" = 1'-0"
APPROVED:
DESIGNED:
DETAILED:
CHECKED:
DATE:
REVISIONS AND RECORD OF ISSUE
OF
PROJECT NO.:
43211/20(SCALE BAR IS 4" AT FULL SCALE)
SUBCONSULTANT:
G
FI
LE
PL
O
TT
ED
Certificate No. 8132 201 South Orange Avenue, Suite 500
Orlando, Florida 32801
Black & Veatch Corporation
FG
C :\P
W _W
O R
KI
N
G \B
VW
_A
M
ER
IC
AS
_2 \D
5\
M -1
.D
W G
5/ 1/
:3
6:
P M
BREVARD COUNTY
UTILITIES MIMS WTP
MIXING IMPROVEMENTS
416085
90% SUBMITTAL
NOT FOR
CONSTRUCTION
JUNE 2024
M-102
MECHANICAL
CHLORINE CONTACT
BASIN NO.2 PLAN AND
SECTION
RS
HK
RE
RS
ADDENDUM NO. 1
04/25 ISSUED WITH MODIFICATION PER1
File details come from the government source that posted it. Updated .