LE-FAMS SOW - CUAS Spotters Kit final.pdf

TRANSPORTATION SECURITY ADMINISTRATION (TSA)

LAW ENFORCEMENT – FEDERAL AIR MARSHAL SERVICE (LE-FAMS)

NATIONAL COUNTER-UNMANNED AIRCRAFT SYSTEMS (CUAS) PROGRAM

STATEMENT OF WORK (SOW)

1. INTRODUCTION

Transportation Security Administration’s (TSA) LE/FAMS-FLTO-FP-ASSESSMENTS has a requirement to purchase CUAS Spotters Kit equipment in support of a field-based law enforcement response to unverified and potentially suspicious/unauthorized drone activity. This customized, rapidly man-portable equipment identified in this SOW is necessary to build a field capability that will be utilized by LE/FAMs for threat discrimination, validation and UAS response operations.

2. SPECIFIC REQUIREMENTS

The selected CUAS Spotters Kit offers a “turnkey” solution to the problem of validating potential visual observation of unauthorized drones, while ensuring these potential sightings are properly de-conflicted when it comes to manned aviation. This purchase will provide FAMS with a CUAS solution consisting of the following optical equipment that provides a daytime, nighttime and thermal capability for response operations:

TECHNICAL SPECIFICATION

a. VooDoo-S Thermal Sight

Salient Characteristics

a) Highest rated recoil Caliber: 7.62x51 - SCAR 17 Heavy

b) Sensor: 640 x 480 Microbolometer

c) Spectral Range: 7.5 - 13.5μm (LWIR)

d) Pitch: 12 μm

e) Pixel Format: <50 Mk

f) Digital Zoom: 0.5x / 1x / 2x / 4x

g) NUC: Shutterless

h) FOV: 19° Diagonal (15° (H) x 11.3° (V)

i) Ballistic Accuracy when co-witnessed: 1 MOA

j) Optical Magnification: UNITY

k) Scope Compatibility: Up to 8x

l) Reticle: Cross-hair, MIL-Dot, SVC, (CUSTOM)

m) Polarity: Black Hot/ White Hot/ White Edge/ Black Edge/ Dynamic

n) Identification: 250 Yards

o) Recognition: 500 Yards

p) Detection: 1000 Yards

q) Laser Range Finder: 850nm, 0.7mW, Class 1 Eye Safe

r) Digital Compass: Yes

s) Display Type: OLED Monochrome

t) Display Resolution: 640 x 480

u) Light Guard: Open Eye Cup

v) Custom Adjustable: +/- 2D

w) Refresh Rate: 60Hz

x) Mount: Picatinny, MIL-STD-1913, NVG Interface, QD FTS, Return to

Zero

y) Video Out: VBS: 1.0 Vp-p, RS170

z) Signal System: NTSC / PAL

aa) Control Keypad and/or Optional Remote Pad

bb) Start Up Time: <5 seconds

cc) Battery: 1x CR123A

dd) Battery Run Time: <3 Hours

ee) External Power: Powered by any standard USB-C portable battery

ff) Weight: 10 oz

gg) Water Immersion: 1M depth, 2 Hours, MIL-STD-810G, 512.5, Procedure I

hh) Shock & Vibration: MIL-STD-810G, Dust & Sand, MIL-STD-810G, 510.5

Procedure I

ii) Operating Temp: -32°C to 55°C, MIL-STD-810G, 501.5, Procedure 1 &

502.5, Procedure 1

jj) Storage Temp: -40°C to 65°C, MIL-STD-810G, 501.5, Procedure 1 &

502.5, Procedure 1

kk) Humidity Rating: >95% MIL-STD-810G, 507.5, Procedure 2MIL-STD-

810G, 507.5, Proceed

ll) Warranty: 1 Year

Included Accessories: BNC Cable (Video Out), USB Cable (Data and Image Transfer), Eye Cup, BNC Coupler, 3v Lithium Battery, Quick Reference Guide, Voodoo-S Manual, Operation / Download Software

*This optic is compatible with the FAMS issued ballistic helmet (Busch Protective AMP-1 TP) via a Wilcox L4 G24 Mount.

b. BNVD-Single Gain Control System

a) Battery Life: 40+ hours with Lithium AA battery

b) Battery Type: AA Battery

c) External Power port: x1

d) Dimensions: 4.3"L x 4.2"W x 3.3"H

e) Field of View: 40°

f) IIT Generation: Gen III

g) Magnification Range: 1X

h) Single Gain Control knob

i) Sensor Type: White Phosphor Image Intensifier Tubes

j) Sensor Resolution: 64 lp/mm min.

k) Weight: 19.8 oz.

l) Product Type: Night Vision

Included Accessories: Carry Case, (2) AA Batteries, Retaining Lens Covers, Demist Shields, Sacrificial Windows, Dovetail Mounting Adapter, Lens Tissue, Manual, Neck Cord, Eye-Cups, Removable compass attachment.

*This optic is compatible with the FAMS issued ballistic helmet (Busch Protective AMP-1 TP) via a Wilcox L4 G24 Mount.

c. ZULU 6 HDX OIS Binocular

a) Image stabilization using a digital accelerometer to optimize the level of stabilization applied based off movement and vibration

b) Magnification: 16x

c) Objective Lens Diameter: 42mm

d) Eye Relief: 16.4mm

e) Field of View: 3.7 degrees

f) Tripod Mount Capable

g) Objective Lens Diameter: 50mm

h) Weight: 1 lb. 5.9 oz

i) Near Focus: 5.5m

j) Gyro Stabilized for steady motion viewing

k) IPX-7 waterproof and fog proof rated

l) 10-minute auto shutoff feature

m) Powered by (2) AA alkaline

n) 40 hrs runtime

d. BNVD External Battery Pack w/ Porting

Features: The battery pack is powered by either 3 AA 1.5 Vdc Alkaline batteries or 3 AA

1.8 Vdc Lithium batteries. It provides an additional 85+ operating hours with Alkaline batteries. The battery pack is 2.7 x 0.9 x 2.5 inches (L x W x H) with a cord length of approximately 24 inches and weighs approximately 72 grams without batteries.

The optional external battery pack will only work with Night Vision Devices manufactured binoculars with an external power port. It is not compatible with our PVS-14, PVS-7, or any non-NVD brand night vision systems. This battery pack connects to BNVD-SGC System and the FAMS issued Ballistic Helmet (Busch Protective AMP-1 TP)

e. Wilcox L4 G24 Mount

Features:

• Breakaway Feature allows Mount to Break Away under Stress, or to Securely

Lock in Place by Means of a Breakaway Lever

• Wilcox NVG Lanyard Assembly (see TDS078) Provides a Secure Attachment to an Array of NVG Devices Preventing Loss of the NVG

• Mount Locks into Place in the Operational and Stowed Positions Provides Over-

Travel in the Fully

• Extended Position to Minimize the Profile of the Mount

• Compatible with the FAMS issued ballistic Helmet (Busch Protective AMP-1

TP)

f. 3X Afocal Magnifier Lens

Features: This 3x Magnifier is compatible with the BVND-SGC System and attaches to the front of the Night Vision Device. This magnifier turns a regular night vision device into a 3x power night vision binocular

g. Night Vision Camera Adapter

Features: Must be able to connect to the eye relief area of the Night Vision Device and Thermal optic and allow for a digital camera or Cell phone to co-witness the optic to take photos.

i. Pelican Carry Case:

Features:

• Watertight, Dust and Crushproof Case

• Must meet size requirements for Domestic Airline Carry On

• Made of Super-Light HPX2 Polymer

• Redesigned Push-Button Latches

• Customizable Pick-N-Pluck Foam Insert

• IP67 Watertight O-Ring Gasket

• Pressure-Equalization Purge Valve

• Stainless Steel Hasp Protectors

• Rubber Over-molded Handle

• Polycarbonate Card Holder

• Roller Wheels

• Extendable Handle

j. Custom Foam Cut Out

Features: This custom cut out needs to fit in the above Pelican Hard Case. It should fit one FAMS issued ballistic Helmet, Night Vision Device, Thermal, Bino, and all their accessory cables parts and batteries. All serial numbered items (Night Vision, Thermal, Bino) need to be custom fit and oriented. The orientation of these devices needs to be in a manner that when the lid of the case is open all serial numbers are easily seen without having to remove the item from the foam parts of case. This orientation will speed in the process of inspection during inventors.

WARRANTY

The vendor shall provide a one (1) year warranty for total replacement starting when the item is delivered.

Standard commercial warranty.

SPECIAL DELIVERY INSTRUCTIONS

The vendor must notify (POINT OF CONTACT NAME AND NUMBER) at least 24 hours in advance of the delivery. The delivery will be turned away if notification is not made 24 hours in advance.

Place/ Location of Performance/ Delivery:

ATTN: LEFAMS / LEAS 8th Floor TSA/ Headquarters 6595 Springfield Center Drive Springfield, VA

PACKING & MARKING REQUIREMENTS

Defective or Damaged Products

Goods delivered that are found to be damaged or in an unacceptable condition may, at the discretion of the authorized purchaser, be returned to the Contractor at the Contractor’s expense within thirty (30) days of receipt. Credit for returned goods shall be made immediately after the Contractor services the returned good(s).