IVHM Transfer Switch Appendix A~2.docx

IVHM Automatic Transfer Switch Replacement Appendix A Provide labor and materials for the removal of (1) existing automatic transfer switch and install (1) automatic transfer switch utilized for sewage system.

Scope of Work

· Vendor will be responsible for the demolition and removal of entire existing automatic transfer switch including wiring, transfer switch, and transfer switch

· Vendor will utilize existing control panel system

· Wiring from control panel will be removed and replaced with new

· Vendor will install new complete transfer switch system to include

· New 225 Amp 208 Volt Automatic Transfer Switch

· New electrical conduit to automatic transfer switch

· New wiring from control panel

· New Unistrut system to hold switch

· Mount Control panel onto new Unistrut system

· Automatic transfer switch must meet the minimum specifications of the below item.

· Asco 2225 Amp 208 Volt Automatic Transfer Switch

· Automatic Transfer Switch is 225 Amps 208/240 VAC 50/60 Cycles

· Automatic Transfer Switch is 3 Phase

· The use of a brand name is for describing the standard of quality, performance, and characteristics desired and is not intended to limit or restrict competition. "Or equal" submissions will not be rejected because of minor differences in design, construction or features that do not affect the suitability of the product for its intended use. Burden of proof that the product is equal is on the bidder.

· Vendor will need to ensure entire system is weatherproof as it will remain in an open-air environment which will be exposed to all weather conditions.

· Vendor must be a Licensed Electrical Contractor in the State of Illinois

· Vendor must provide proof of Electrical Contractors License prior to award

· Vendor will be responsible for the proper removal and disposal of any waste created during job from facility grounds.

· Vendor will be responsible for any property damage during the demolition, removal, and installation of Transfer Switch System.

· Vendor will ensure work area is clear of debris and garbage when work is completed.

· Vendor will coordinate and schedule all work through the Chief Engineer.

· All work to be completed during normal business hours Monday-Friday 08:00 AM – 05:00 PM excluding State and Federal holidays.

· Chief engineer will sign off on work at the completion of the project.

· Vendor will be responsible for providing the Chief Engineer with all manufacturer paperwork and warranty information.

· Vendor must bring all materials and tools to job site. The facility will not be responsible for the storage or transportation of any tools and/or materials.