IUID.pdf
PDF 62 KB Posted
- Solicitation number
- FA8206-25-Q-0613
About this file
The document is an Item Unique Identification (IUID) Checklist for a B-1B Power Take-Off (PTO) Shaft, specifically for NSN 2835015373778RP, Version 2. The checklist details the marking requirements for the turbine shaft in accordance with MIL-STD-130, specifying a data label marking method using Tesa Tape. The item is associated with the 419 SCMS / GUEA organization, with Taylor D. Olpin listed as the initiator, and includes contact information of 801-775-2073 for commercial phone and 775-2073 for DSN phone.
The document indicates the PTO shaft should be marked per Tech Order 2JA5-18-2, with engineering recommending continuation of the current marking methodology. The checklist includes sections for IUID details and embedded items, with an attachment of pages from the referenced technical order. This document appears to be part of a solicitation (FA8206-25-Q-0613) for B-1B Power Take-Off Shaft Remanufacture, issued by the Department of the Air Force Materiel Command Air Force Sustainment Center.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA8206-25-Q-0613-0001 Solicitation.pdf | ||
| FA8206-25-Q-0613 Solicitation.pdf | ||
| CDRL.pdf | ||
| ITMDESC_REPORT.pdf | ||
| 807_QAIRQMT_REPORT.pdf | ||
| 158_PKGRQMT_REPORT.pdf | ||
| B1B_PWS_PTO.pdf | ||
| CAVAF.pdf | ||
| RDL_REPORT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
I. IUID DETAILS: DFARS 252.211.7003
SECTION (c) (1) (ii) APPLIES TO THE FOLLOWING:
ITEM REQUIRING IUID MARKING
NSN
2835015373778RP
VERSION NUMBER
NOUN
SHAFT,TURBINE,NONAI
INITIATOR
Olpin, Taylor D
ORGANIZATION CODE / OFFICE SYMBOL
419 SCMS / GUEA
COMMERCIAL PHONE
801-775-2073
DSN PHONE
775-2073
CAGE / REFERENCE NUMBER
MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130
MARKING GUIDANCE
Recommended Marking Instruction
ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE
Data Label
MARKING METHOD
Tesa Tape
DESCRIPTION / LOCATION
Currently per Tech Order 2JA5-18-2, PTO shaft is marked with Tesa Tape label per attachment. Engineering recommends continuation of marking with the same methodology as currently exists in the T.O.
REMARKS
ATTACHMENT(S)
Pages from 2JA5-18-2 WP 006.pdf
II. EMBEDDED ITEMS
SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:
NSN NOUN
CAGE / REFERENCE NUMBER
ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 2835015373778RP
MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
REMARKS
ATTACHMENT(S)
Page 1 of 1IUID Version 2Generated by PRPS using Jasper Reports on 27 May 2025
File details come from the government source that posted it. Updated .