807_QAIRQMT_REPORT.pdf
PDF 86 KB Posted
- Solicitation number
- FA8206-25-Q-0613
About this file
This document is an AFMC Form 807 (Recommended Quality Assurance Provisions and Special Inspection Requirements) for a B-1B Power Take-Off (PTO) Shaft Remanufacture contract. The quality assurance provisions specify detailed inspection requirements for the shaft manufacturing process, including production lot testing using ANSI/ASQ Z1.4 standards with General Inspection Level II and an Acceptance Quality Limit of 1.0. Contractors must inspect all shaft dimensions per drawing 3609195-1 and provide test reports to the local Defense Contract Management Agency (DCMA) representative or 419 SCMS/GUEA if no local representative is available. The document includes contact information for key personnel, including Item Manager Justin T. Ross and Equipment Spec Troy Rackham, and indicates the technical authority is Taylor D. Olpin from the 419 SCMS/GUEA organization.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA8206-25-Q-0613-0001 Solicitation.pdf | ||
| ITMDESC_REPORT.pdf | ||
| 158_PKGRQMT_REPORT.pdf | ||
| B1B_PWS_PTO.pdf | ||
| CAVAF.pdf | ||
| RDL_REPORT.pdf | ||
| IUID.pdf | ||
| FA8206-25-Q-0613 Solicitation.pdf | ||
| CDRL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
2835015373778RP
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Ross, Justin T / 801-775-4959
6. EQUIPMENT SPEC / PHONE
Rackham, Troy / 801-586-3675
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY FOR INSPECTION
FAR 52.246-15
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6 AS APPLICABLE TO CONTRACT
HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS FAR 52.246-11
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
X OTHER (Describe in Block 8)
8. REMARKS
Hull, Carter ANAME: 14 APR 2025DATE:
Perform production lot testing in accordance with ANSI/ASQ Z1.4, using General Inspection Level II and an Acceptance Quality Limit of 1.0. Inspect all shaft dimensions of part, per drawing 3609195-1. Test Report Required may be satisfied by sending lot inspection results to local DCMA representative. If a local DCMA representative is not available, send results to 419 SCMS/GUEA.
Olpin, Taylor DNAME: 11 JAN 2023DATE:
Perform production lot testing in accordance with ANSI/ASQ Z1.4, using General Inspection Level II and an Acceptance Quality Limit of 1.0. Inspect all shaft dimensions of part, per drawing 3609195-1. Test Report Required may be satisfied by sending lot inspection results to local DCMA representative. If a local DCMA representative is not available, send results to 419 SCMS/GUEA.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE DAFFARS 5323.8)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
I
11. SIGNATURE OF TECHNICAL AUTHORITY
Olpin, Taylor D
ORGANIZATION / SYMBOL
419 SCMS / GUEA
PHONE
801-775-2073 / 775-2073
DATE
14 APR 2025
Page 1 of 1Prescribed by: AFMCI20-102 Version 4Generated by PRPS using Jasper Reports on 27 May 2025
AFMC FORM 807, 20230130 PREVIOUS EDITION IS OBSOLETE
File details come from the government source that posted it. Updated .