ITB127 - Attachment 9 - Optional Bid Items.docx

ITB127

ATTACHMENT 9 – OPTIONAL ITEMS SPECIFICATIONS

Hydraulics and Hydraulic Control System Upgrade.

Additional Cost for Integrated hydraulic and control with enhanced capability to operate an ITD attached Tow Plow and equipment in lieu of the CHyd-2022-GPSDS-WARS-10CY Tandem specified.

Complete System Part Number: CPS HYD-2022--WARS-10CY- Tab/Cam -Tow Plow.

Hydraulic connections for tow plow must include stainless steel hard lines utilizing individual urethane mounts to supply hydraulic fluid to rear of truck, rubber lead hoses, and quick couplers, dust plugs/caps, and tow plow circuit mounting plate.

Chelsea Series 280 Continuous Duty PTO Mounted to Allison 4500 RDS transmission, and a TXV92 or equal hydraulic pump connected to the PTO. All plumbing and connections to the hydraulic tank/valve bank included.

Distributor Drop Chute In Lieu of Distributor/Spinner Type – Fold up type designed to direct the granular material behind rear tandem dual tires.

Distributor/Spinner Chute – 10-Gauge Fully Enclosed Box Style.

Bottom Width – 48 in wide at discharge bottom.

Depth – Chute must have a depth of 13 in at bottom discharge point.

Inside Deflectors.

Side Deflectors – Two (2) mounted to the front and rear of the distributor chute.

Deflectors must be flat and mounted 9 in from chute sides at same angle as chute sides.

Deflectors shall be flush with the bottom of chute and of sufficient height to create a 3 in opening at the top to allow material to drop straight down.

Front Sealing Flap – Rubberized belting material bolted to the front side of the distributor chute to prevent granular material from exiting between the top of the distributor chute and the conveyor auger.

Lifting Lug – One (1), constructed of 5/8 in round bar stock with 3 in diameter opening. Lug shall be welded to the bottom rear vertical edge of the distributor chute with 3 in opening facing upward. Lifting lug shall be used for connecting a portable come along between hopper body anchor lug and distributor chute lifting lug for raising the distributor chute.

Discharge Height – Chute shall be constructed to have a discharge height not to exceed 10 in from ground with unit mounted in truck and empty with the truck having a dump body floor height of 51 in.

Tarp – Semi-Automatic Pull Type In Lieu Of Fully Automatic Roll Up Type Powder coated 12-gauge radiused protective housing.

Protective housing must include vertical back allowing for flush mounting with cab shield.

Chemically treated solid asphalt rated fabric equipped with side flaps.

All hardware installed on bed to make tarp functional.

Grommets on 24 in centers, laced with rubber rope.

1. Hydraulics and Hydraulic Control System Upgrade.

5.1. Additional Cost for Integrated hydraulic and control with enhanced capability to operate an ITD attached Tow Plow and equipment in lieu of the CHyd-2022-GPSDS-WARS-10CY Tandem specified.

5.2. Complete System Part Number: CPS HYD-2022--WARS-10CY- Tab/Cam -Tow Plow.

5.3. Hydraulic connections for tow plow must include stainless steel hard lines utilizing individual urethane mounts to supply hydraulic fluid to rear of truck, rubber lead hoses, and quick couplers, dust plugs/caps, and tow plow circuit mounting plate.

2. Chelsea Series 280 Continuous Duty PTO

6.1. Mounted to Allison 4500 RDS transmission, and a TXV92 or equal hydraulic pump connected to the PTO. All plumbing and connections to the hydraulic tank/valve bank included.

3. Distributor Drop Chute In Lieu of Distributor/Spinner

7.1. Type – Fold up type designed to direct the granular material behind rear tandem dual tires.

7.2. Distributor/Spinner Chute – 10-Gauge Fully Enclosed Box Style.

7.3. Bottom Width – 48 in wide at discharge bottom.

7.4. Depth – Chute must have a depth of 13 in at bottom discharge point.

7.5. Inside Deflectors.

7.6. Side Deflectors – Two (2) mounted to the front and rear of the distributor chute.

7.7. Deflectors must be flat and mounted 9 in from chute sides at same angle as chute sides.

7.8. Deflectors shall be flush with the bottom of chute and of sufficient height to create a 3 in opening at the top to allow material to drop straight down.

7.9. Front Sealing Flap – Rubberized belting material bolted to the front side of the distributor chute to prevent granular material from exiting between the top of the distributor chute and the conveyor auger.

7.10. Lifting Lug – One (1), constructed of 5/8 in round bar stock with 3 in diameter opening. Lug shall be welded to the bottom rear vertical edge of the distributor chute with 3 in opening facing upward. Lifting lug shall be used for connecting a portable come along between hopper body anchor lug and distributor chute lifting lug for raising the distributor chute.

7.11. Discharge Height – Chute shall be constructed to have a discharge height not to exceed 10 in from ground with unit mounted in truck and empty with the truck having a dump body floor height of 51 in.

4. Tarp – Semi-Automatic Pull Type In Lieu Of Fully Automatic Roll Up Type

8.1. Powder coated 12-gauge radiused protective housing.

8.2. Protective housing must include vertical back allowing for flush mounting with cab shield.

8.3. Chemically treated solid asphalt rated fabric equipped with side flaps.

8.4. All hardware installed on bed to make tarp functional.

8.5. Grommets on 24 in centers, laced with rubber rope.

8.6. Tarp must be designed to work on the tapered side dump specified from a position of the operator standing on the ground.

1 | Page ITB 127 Attachment 9 – Optional Items Specifications 10 CY Dump Bodies, Hydraulic System Install, V-Box Spreader, and Wing Plows