Central Plant Water Chemistry Tracked by plant staff.jpeg

This is a Power Plant Water Chemistry Testing Log documenting water quality measurements across three monitoring locations: City Water, Tower, and Softener. The log contains daily test data collected between July 8, 2026 and July 24, 2026, tracking multiple water quality parameters including conductivity (measured in µS/cm), hardness (measured in PPM), cycles, and PTSA values.

The City Water section establishes baseline ranges (Conductivity: N/A, Hardness: N/A, Cycles: N/A) with conductivity values recorded between approximately 420-510 µS/cm and hardness measurements between 15-23 PPM. The Tower section monitors treated water with conductivity ranges of 1,000-2,000 µS/cm, hardness levels below 50 PPM, and cycle counts between 1.8-2.6. The Softener section tracks secondary treatment effectiveness with conductivity values ranging from approximately 420-590 µS/cm and hardness readings predominantly below 34 PPM. PTSA values in the Tower section range from 40.2 to 62.1 ppm. All measurements are recorded in handwritten entries on a standardized testing form suitable for ongoing operational monitoring and regulatory compliance documentation at a power generation facility.