IGM_-_PAPI_-_PLANS.pdf

PDF 13 MB Posted Nov 5, 2025

Attached to: Kingman Municipal Airport PAPI Project
Solicitation number: 2025-IFB-033
Issued by: Mohave County, Arizona

About this file

Written by GovTribe AI · Jan 7, 2026

Kingman Municipal Airport PAPI Replacement Project – Contract Drawings

This document comprises the 100% design submittal contract drawings for the Precision Approach Path Indicator (PAPI) replacement project at Kingman Municipal Airport in Kingman, Arizona, prepared by C&S Engineers, Inc. The project, funded by an ADOT Grant (E2S4U01C), involves the replacement of existing PAPI systems on Runway 3-21 and Runway 17-35 with new LED PAPI light housing assemblies, control units, transformers, and associated electrical infrastructure. The scope includes removal and salvage of four existing 4-box PAPI light assemblies, two 2-box PAPI assemblies, four power/control units with foundations, 545 linear feet of existing conductor, installation of three new 2KVA step-down transformers, four new junction cans, two L-880(L) LED 4-box PAPI systems, two L-881(L) LED 2-box PAPI systems, 1,165 linear feet of 5KV cable, 1,055 linear feet of interconnect cables, and approximately 1,045 linear feet of new direct-buried conduit in single and multiple configurations. Construction is divided into two sequential work areas with individual 14-calendar-day phases (28 calendar days total), requiring nighttime runway closures between 9 pm and 6 am coordinated with the airport a minimum of 72 hours in advance. Sealed bids are due February 9, 2026, by 11:00 am Arizona time through the City of Kingman's OpenGov procurement portal, with questions due by January 26, 2026, at 5:00 pm Arizona time.

The drawings establish comprehensive electrical construction requirements including grounding details with exothermic connections, ductbank installation specifications with concrete encasement under pavement, L-867E junction can configurations, 5KV cable splice details, and PAPI power distribution equipment mounting on frangible struts with new concrete pads. All work must comply with FAA Advisory Circulars, applicable electrical codes, and airport operational safety requirements, including Foreign Object Debris (FOD) elimination, construction vehicle amber beacons or flags, and yielding right-of-way to taxiing aircraft. The contractor bears responsibility for utility location, damage repair at its expense, site condition verification, all test failures, equipment salvage delivery to airport operations, and restoration of disturbed areas. No price escalation is permitted for unit bid items regardless of cost increases. The project is subject to standard airport construction safety and phasing protocols outlined in Section 70 of contract documents, with temporary barricades, lighted runway closure markings, and sign coverage required during construction phases.

View the file

Other files

File	Type	Posted
Kingman_Municipal_Airport_PAPI_Project_(Addendum_#1_Revision).pdf	PDF	Jan 29, 2026
Kingman_Municipal_Airport_PAPI_Project.pdf	PDF	Jan 5, 2026
AD87611_jnl.pdf	PDF	Dec 8, 2025
AD87611_jnl.pdf	PDF	Dec 8, 2025
IGM_-_PAPI_-_SPECS.pdf	PDF	Nov 5, 2025
IGM_-_PAPI_-_SPECS.pdf	PDF	Nov 5, 2025
IGM_-_PAPI_-_PLANS.pdf	PDF	Nov 5, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DRAWINGS

FOR THE CONSTRUCTION OF

PAPI REPLACEMENT

KINGMAN MUNICIPAL AIRPORT

CITY OF KINGMAN

KINGMAN, ARIZONA

ADOT Grant No. E2S4U01C

MAY 2025

Ma y 2

- 9

:14 pm

F:\ Pr oje ct\

K3 2 -

Ki ng ma n A irp ort

, A Z\K

Re pla ce me nt\ De sig n\C

Sh ee t F ile s\K

I00 1.d wg

LOCATION MAP

NOT TO SCALE

C&S PROJECT: K32.007.008

100% SUBMITTAL

GI001

S 89

SR 66

I-40

SELIGMAN

ASH FORK

PRESCOTT

US 93

NEEDLES

KINGMAN

C olora

R iv lo

US 93

I-4

IZO

N A

EVAD

Co er do

River Lake

Havasu do SR

ALIFO

R N

LAKE HAVASU CITY

SHEET INDEX

SHEET NO.

SHEET

REFERENCE NO. TITLE

1 GI001 TITLE SHEET

2 GI002 LEGEND, GENERAL NOTES, AND QUANTITIES FOR CANVASS OF BIDS

3 GI101 GENERAL PLAN

4 GC100 OVERALL CONSTRUCTION SAFETY AND PHASING PLAN

5 GC101 CONSTRUCTION SAFETY AND PHASING PLAN - WORK AREA A

6 GC102 CONSTRUCTION SAFETY AND PHASING PLAN - WORK AREA B

7 GC501 CONSTRUCTION SAFETY AND PHASING DETAILS

8 E-001 ELECTRICAL LEGEND AND NOTES

9 E-002 OVERALL ELECTRICAL

10 ED-101 AIRFIELD ELECTRICAL DEMOLITION PLAN

11 ED-102 AIRFIELD ELECTRICAL DEMOLITION PLAN

12 ED-103 AIRFIELD ELECTRICAL DEMOLITION PLAN

13 ED-104 AIRFIELD ELECTRICAL DEMOLITION PLAN

14 EA-201 AIRFIELD ELECTRICAL PLAN

15 EA-202 AIRFIELD ELECTRICAL PLAN

16 EA-203 AIRFIELD ELECTRICAL PLAN

17 EA-204 AIRFIELD ELECTRICAL PLAN

18 EA-301 PANEL C SCHEDULE AND PAPI 21 TRANSFORMER REPLACEMENT

19 EA-401 DUCTBANK DETAILS

20 EA-402 GROUNDING DETAILS

21 EA-403 JUNCTION CAN DETAILS

22 EA-404 5KV SPLICE DETAILS

23 EA-405 RW 3-21 4-BOX PAPI DETAILS

24 EA-406 RW 17-35 2-BOX PAPI DETAILS

25 EA-407 PAPI POWER DISTRIBUTION EQUIPMENT DETAILS

AutoCAD SHX Text

KINGMAN AIRPORT

rbehm Text Box

SEPTEMBER 2025

rbehm Rectangle rbehm Snapshot rbehm Text Box

2025-IFB-033

B1 SCALE: NOT TO SCALE

GENERAL NOTES

GENERAL CONSTRUCTION NOTES

1. THE CONTRACTOR'S ATTENTION IS DIRECTED TO SECTION 70-08, ATTACHMENT A -

CONSTRUCTION SAFETY AND PHASING PLAN (CSPP) OF THE GENERAL PROVISIONS.

2. THESE DRAWINGS HAVE BEEN PREPARED, IN PART, BASED UPON RECORD DRAWINGS

AND/OR DATA FURNISHED BY OTHERS. WHILE THIS INFORMATION IS BELIEVED TO BE

RELIABLE, THOSE UTILIZING THE INFORMATION ON THESE DRAWINGS ARE ADVISED

TO OBTAIN INDEPENDENT VERIFICATION OF ITS ACCURACY BEFORE USING IT FOR

ANY PURPOSE.

3. EXISTING UTILITIES WERE TAKEN FROM PLANS OF RECORD. THEY HAVE BEEN

SHOWN TO THE EXTENT KNOWN AND ARE OFFERED IN GOOD FAITH SOLELY FOR

INFORMATIONAL PURPOSES. THEY MAY NOT REFLECT ACTUAL LOCATIONS AND MAY

NOT BE INCLUSIVE. IT IS THE CONTRACTOR'S RESPONSIBILITY TO LOCATE ALL

UTILITIES PRIOR TO THE START OF CONSTRUCTION.

4. THE ACTUAL LOCATION AND ELEVATION OF ALL UTILITIES SHALL BE FIELD VERIFIED

BY THE CONTRACTOR PRIOR TO THE START OF CONSTRUCTION.

5. IN THE EVENT OF DAMAGE TO EXISTING UTILITIES OR CABLES, THE ENGINEER AND

OWNER SHALL BE NOTIFIED IMMEDIATELY.

6. THE CONTRACTOR SHALL REPAIR ALL DAMAGE TO UTILITIES OR CABLES, AS

DIRECTED BY THE ENGINEER, IMMEDIATELY AND AT THE CONTRACTOR'S EXPENSE.

7. ALL AREAS DISTURBED AS A RESULT OF THE CONTRACTOR'S STAGING AND

CONSTRUCTION OPERATIONS SHALL BE RESTORED EQUAL TO OR BETTER THAN

ORIGINAL CONDITION AT THE CONTRACTOR'S EXPENSE.

8. ALL DIRT, DUST, STONES AND LOOSE DEBRIS SHALL BE CONTINUOUSLY REMOVED

FROM ALL PAVED SURFACES DURING THIS CONTRACT.

9. THIS CONTRACT DOES NOT ALLOW FOR PRICE INCREASES DUE TO ESCALATION IN

COST OF UNIT BID ITEMS. THE CONTRACTOR SHALL TAKE THIS INTO CONSIDERATION

WHEN PREPARING UNIT PRICES FOR BID.

10. THE COST OF ALL FAILING TESTS PERFORMED BY THE OWNER OR ON THE OWNER'S

BEHALF SHALL BE BORNE BY THE CONTRACTOR.

ELECTRICAL AND SIGNAGE NOTES

11. ALL ELECTRICAL WORK SHALL CONFORM TO APPLICABLE LOCAL, STATE AND

NATIONAL ELECTRICAL CODES.

12. THE ELECTRICAL CHARACTERISTICS OF PROPOSED EQUIPMENT SHALL BE VERIFIED

TO BE COMPATIBLE WITH EXISTING EQUIPMENT MANUFACTURER PRIOR TO

INSTALLATION.

13. ABANDONED CABLES MAY EXIST IN THE VICINITY OF THE PROPOSED WORK. IF

ENCOUNTERED, CONTRACTOR SHALL VERIFY THAT THEY ARE ABANDONED PRIOR TO

REMOVAL. IF THEY ARE NOT ABANDONED, CABLES SHALL BE REPAIRED AT THE

CONTRACTOR'S EXPENSE.

14. ITEMS OF SPECIFIC MANUFACTURE SHALL BE INSTALLED IN STRICT ACCORDANCE

WITH MANUFACTURER'S PRINTED INSTRUCTIONS AND OR MANUFACTURER'S

REPRESENTATIVE DIRECTIONS.

15. ALL GROUND CONNECTIONS SHALL BE MADE USING EXOTHERMIC CONNECTIONS.

16. ALL CABLE CONNECTIONS SHALL BE MADE AT LIGHT UNITS OR AT ENDS OF DUCT

BANKS UNLESS DIRECTED OTHERWISE.

17. THE OWNER RESERVES THE RIGHT TO SALVAGE REMOVED EQUIPMENT. THE

EQUIPMENT TO BE SALVAGED IS IDENTIFIED IN THE SPECIFICATION. SALVAGED

EQUIPMENT SHALL BE STOCKPILED AT A LOCATION DESIGNATED BY THE OWNER.

A1 SCALE: NOT TO SCALE

QUANTITIES FOR CANVASS OF BIDS

SHEET NO. OF

K32.007.008

MAY 2025

K.M. WATSON

A. STRONG

L.R. MCINTOSH

100% SUBMITTAL

NOT FOR

CONSTRUCTION

LEGEND, GENERAL

NOTES, AND

QUANTITIES FOR

CANVASS OF BIDS

GI002

2 25

N, A

DRAWN BY:

M ay

- 9

:1 4p m F:

\P ro je ct

Ki ng m an A irp or t, AZ

I R ep la ce m en t\D es ig n\

\S he et

F ile s\ K3

G I-D

dw g

1 2 3 4

2575 East Camelback Road Suite 740

Phoenix, Arizona 85016 Phone: 602-997-7536

Fax: 602-755-2094 www.cscos.com

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

NO SPEC DESCRIPTION QUANTITY UNITS

1 C-105-6.1 MOBILIZATION 1 LS

2 C-106-3.1 SAFETY, SECURITY AND MAINTENANCE OF TRAFFIC 1 LS

3 L-100-5.1 REMOVE AND SALVAGE EXISTING 4-BOX PAPI LIGHT HOUSING ASSEMBLIES,

CONCRETE FOUNDATIONS TO REMAIN 2 EA

4 L-100-5.2 REMOVE AND SALVAGE EXISTING 2-BOX PAPI HOUSING ASSEMBLIES,

CONCRETE FOUNDATIONS TO REMAIN 2 EA

5 L-100-5.3 REMOVE AND SALVAGE EXISTING PAPI PCU, POWER EQUIPMENT AND RACK,

REMOVE CONCRETE FOUNDATION 4 EA

6 L-100-5.4 REMOVE EXISTING CONDUCTOR, CONDUIT TO REMAIN 545 LF

7 L-100 NEW PAPI 2KVA STEP-DOWN TRANSFORMER AND 600V FUSED DISCONNECT

WITH FRANGIBLE STRUT RACK ON NEW CONCRETE PAD 3 EA

8 L-100 NEW FRANGIBLE STRUT RACK ON NEW CONCRETE PAD FOR PAPI PCU (IF

REQUIRED) 1 EA

9 L-100-5.7 REMOVE AND REPLACE WITH NEW PAPI & REIL 21, 2 KVA 240V TO 480V

STEP-UP TRANSFORMER IN LIGHTING VAULT BUILDING 1 EA

10 L-108-5.1 L-824, TYPE C, 2/C #8 AWG, 5KV CABLE, #8 GROUND 1,165 LF

11 L-108-5.2 3-#10, #10 GROUND & TILT INTERCONNECT CABLES 1,055 LF

12 L-110-5.1 SINGLE-WAY, (1) - 2" CONDUIT, DIRECT BURIED 490 LF

13 L-110-5.2 MULTIPLE-WAY, (2) - 2" CONDUIT, DIRECT BURIED 555 LF

14 L-115-5.1 NEW L-867E (24" DIA) JUNCTION CAN WITH STEEL COVER 4 EA

15 L-125-5.1 NEW L-880A(L) LED 4-BOX PAPI AND CONTROLLER ON EXISTING FOUNDATIONS

WITH ALL WIRING AND GROUNDING, COMPLETE IN PLACE, AIMED AND TESTED

2 EA

16 L-125-5.2 INSTALL NEW L-881A(L) LED PAPI (2-BOX) AND CONTROLLER ON EXISTING

FOUNDATIONS WITH ALL WIRING AND GROUNDING, COMPLETE IN PLACE,

AIMED AND TESTED 2 EA

A4 SCALE: NOT TO SCALE

ABBREVIATIONSA3 SCALE: NOT TO SCALE

LEGEND

WATER VALVE/METER

EXISTING PROPOSEDDESCRIPTION

FIRE HYDRANT

BACKFLOW PREVENTER

GAS VALVE/METER

SANITARY SEWER & MANHOLE

STORM DRAIN & MANHOLE SD

TEL MANHOLE/LINE/PEDESTAL T

GAS LINE

CABLE TELEVISION CATV

WATER LINE & MANHOLE

SANITARY SEWER CLEANOUT

POWER POLE/GUY CABLE & ANCHOR

STREET LIGHT & W/MAST ARM

BOLLARD

SINGLE & DOUBLE POST SIGNS

AIRPORT REFLECTIVE MARKER

MAILBOX

PROPERTY CORNER

BRASS CAP FLUSH/IN HAND HOLE

PROPERTY/RIGHT OF WAY LINE

CENTER/MONUMENT LINE

EASEMENT

VERT CURB/CURB & GUTTER

BARBED WIRE FENCE

CHAIN LINK FENCE

WROUGHT IRON FENCE

WALL

CONTOUR LINES 1125 1125

SECTION LINE

SPOT ELEVATION

PRECAST PARKING SPACE CURB

NEW DOUBLE SLIDING VEHICLE GATE

EXIST. FENCING TO BE REMOVED

EX W

EX GAS

24" SD

CATV

GAS

24" SD

GRADE BREAK GB

7005.38

BUILDING/STRUCTURE

AC PAVEMENT

CONCRETE PAVEMENT

RIPRAP

CONSTRUCTION NOTE

PROJECT CONTROL POINT

EXISTING PAVEMENT TO BE REMOVED

RUNWAY OBJECT FREE AREA

RUNWAY SAFETY AREA RSA

ROFA

RSA

ROFA

WINDCONE

SEE SHEET E-001 FOR ELECTRICAL LEGEND

· EXISTING ELECTRICAL CONDUIT AND CONDUCTOR

· PVC W/#8-5KV L-824 TYPE "C" CABLE PER INDICATED LIGHTING CIRCUIT. (QUANTITY AND

SIZE AS INDICATED ON PLAN SHEETS)

· EXISTING ELECTRICAL PULLBOX/HANDHOLE/JUNCTION CAN

· EXISTING ELEVATED EDGE LIGHT

· EXISTING AIRFIELD GUIDANCE SIGN

· EXISTING PAPI

· EXISTING PAPI POWER EQUIPMENT RACK

· NEW L-867E (24" DIA) JUNCTION CAN WITH BLANK COVER

· NEW PAPI POWER CONTROL UNIT (IF REQUIRED), 600V DISCONNECT, AND STEP-DOWN

TRANSFORMER ON NEW

· FRANGIBLE STRUT RACK ON NEW CONCRETE FOUNDATION

· NEW PAPI LIGHT HOUSING ASSEMBLY ON EXISTING CONCRETE FOUNDATION

3/21 RUNWAY DESIGNATION

A.C. ASPHALT CONCRETE

ABC AGGREGATE BASE COURSE

AC ASPHALTIC CONCRETE

AIP AIRPORT IMPROVEMENT PROGRAM

APPROX. APPROXIMATE

ASPH. ASPHALT

ASTM AMERICAN SOCIETY FOR TESTING MATERIALS

BC BEGIN CURVE

BLDG. BUILDING

BM BENCH MARK

CL CENTERLINE

CONC. CONCRETE

CU FT CUBIC FEET

CY CUBIC YARDS

D50 DIAMETER OF 50% ROCK SIZE

DIA. DIAMETER

E EAST

EA EACH

EC END OF CURVE

ELEC ELECTRIC/ELECTRICAL

ELEV. ELEVATION

EOP EDGE OF PAVEMENT

EX EXISTING

EXST EXISTING

FAA FEDERAL AVIATION ADMINISTRATION

FG FINISH GRADE

FL FLOW LINE

FS FINISH SURFACE

FT FOOT

GA GENERAL AVIATION

GB GRADE BREAK

HP HIGH POINT

IE INVERT ELEVATION

JB JUNCTION BOX

L LENGTH

LF LINEAL FOOT

LP LOW POINT

LS LUMP SUM

LT LEFT

MAX. MAXIMUM

MIN. MINIMUM

MISC. MISCELLANEOUS

N NORTH

N/A NOT APPLICABLE

NA NOT APPLICABLE

NO. NUMBER

NPI NON-PAY ITEM

NTS NOT TO SCALE

OFA OBJECT FREE AREA

PAV'T. PAVEMENT

PC POINT OF CURVATURE

PROP PROPOSED

PVMT PAVEMENT

R RADIUS

ROFA RUNWAY OBJECT FREE AREA

RPZ RUNWAY PROTECTION ZONE

RSA RUNWAY SAFETY AREA

RT RIGHT

RW RUNWAY

S SOUTH

S= SLOPE

SD STANDARD DETAIL

SD STORM DRAINAGE

SECT SECTION

SHT SHEET

SPECS SPECIFICATIONS

STA STATION

SY SQUARE YARDS

TOFA TAXIWAY OBJECT FREE AREA

TSA TAXIWAY SAFETY AREA

TW TAXIWAY

TYP TYPICAL

UD UNDERDRAIN

UG UNDERGROUND

W WEST

WT WEIGHT

ABBREVIATION DEFINITION

AutoCAD SHX Text W rbehm Rectangle rbehm Snapshot rbehm

SEPTEMBER 2025

OLYMPIC WAY

FLIGHTLINE DRIVE

SAN

TA FE D

IVE

GOVERNMENT WAY

FIN

C E W

TRANSPORT DRIVE

FLIGHTLINE DRIVE

T W

WINDROSE LN.

OLYMPIC WAY OLYMPIC WAY

M O

AVE AIR

T D R

IVE

CITYWELLNO.1

RUNWAY 3-21

4" TAXIWAY "D"

RUNWAY 17

-35

"D2"

TW "B"

TAXIW

AY "C

TW "C1"

"D1"

MILLENNIUM

AVIONICS

TAXIW

AY "A"

TAXIWAY "D" TW

Y "D3"

TOFA TOFA TOFA TOFA TOFA TOFA TOFA

SHEET NO. OF

K32.007.008

MAY 2025

K.M. WATSON

A. STRONG

L.R. MCINTOSH

100% SUBMITTAL

NOT FOR

CONSTRUCTION

GENERAL PLAN AND

SURVEY CONTROL

GI101

3 25

N, A

DRAWN BY:

M ay

- 9

:5 5p m F:

\P ro je ct

Ki ng m an A irp or t, AZ

I R ep la ce m en t\D es ig n\

\S he et

F ile s\ K3

G I-P

dw g

1 2 3 4

2575 East Camelback Road Suite 740

Phoenix, Arizona 85016 Phone: 602-997-7536

Fax: 602-755-2094 www.cscos.com

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

A1 A3SURVEY SUPPORTING INFORMATION CONTROL POINTS

GENERAL PLAN AND SURVEY CONTROL

SCALE: 1" = 500'

SCALE: NOT TO SCALE SCALE: NOT TO SCALE

500'

500 0 500 1000FT.

SURVEY CONTROL POINTS

POINT # DESCRIPTION

IGM A

IGM B

IGM AP STA A2

Q 262 (BENCHMARK)

PK END RWY 3

PK END RWY 21

ELEVATION

3451.738

3361.843

3413.615

3379.619

3411.539

3394.675

NORTHING

1546966.728

1553712.230

1546807.607

1547718.267

1546934.837

1551750.768

EASTING

644766.756

644703.965

640902.217

638103.317

640853.089

645690.184

NOTE: POINTS 1-4 COORDINATES BASED ON NGS - PACS AND SACS

(https://www.ngs.noaa.gov/cgi-bin/airports.prl?TYPE=PACSAC)

IGM AP STA A2

Q 262 (ELEVATION BENCHMARK)

IGM B

IGM A

PK END RWY 3

PK END RWY 21

AutoCAD SHX Text

SCV

AutoCAD SHX Text

SCV

AutoCAD SHX Text

SCV

AutoCAD SHX Text

SCV

AutoCAD SHX Text

SCV

AutoCAD SHX Text

EXISTING T-SHADE STRUCTURE

AutoCAD SHX Text

EXISTING HANGAR BUILDING

AutoCAD SHX Text

VENT

AutoCAD SHX Text

VENT

AutoCAD SHX Text

VENT

AutoCAD SHX Text

AutoCAD SHX Text ALL COORDINATES LISTED ARE NAD83 (NA2011) U.S. STATE PLANE OF 1983, ARIZONA WEST ZONE (AT GRID), INTERNATIONAL FEET, GEOID MODEL 12A ELEVATIONS SHOWN HEREON ARE ON NAVD 88 DATUM.

AutoCAD SHX Text

AutoCAD SHX Text rbehm Rectangle rbehm Snapshot rbehm

WORK AREA A

WORK AREA B

CONTRACTOR'S STAGING AREA

OLYMPIC WAY

FLIGHTLINE DRIVE

SAN

TA FE D

IVE

GOVERNMENT WAY

FIN

C E W

TRANSPORT DRIVE

FLIGHTLINE DRIVE

T W

WINDROSE LN.

OLYMPIC WAY OLYMPIC WAY

M O

AVE AIR

T D R

IVE

CITYWELLNO.1

ROFA ROFA ROFA ROFA ROFA ROFA

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

R O

ROFA ROFA ROFA

RSA RSA RSA

RSA RSA RSARSA RSA RSA RSA RSA RSA RSA

RSA RSA RSA RSA RSA RSA RSA

ROFA

RSA

RUNWAY 3-21

4" TAXIWAY "D"

RUNWAY 17

-35

"D2"

TW "B"

TAXIW

AY "C

TW "C1"

"D1"

MILLENNIUM

AVIONICS

TAXIW

AY "A"

TAXIWAY "D" TW

Y "D3"

TOFA TOFA TOFA TOFA TOFA TOFA TOFA

1. SEE SHEETS GC101 AND GC102 FOR INDIVIDUAL WORK AREA INFORMATION.

2. CONTRACTOR SHALL COMPLY WITH THE CONSTRUCTION SAFETY PHASING PLAN IN

SECTION 70 OF THE CONTRACT DOCUMENTS.

3. ALL HAUL ROADS AND TEMPORARY ACCESS LOCATIONS SHALL BE RESTORED TO

ORIGINAL CONDITION BY THE CONTRACTOR AT THE COMPLETION OF THIS PROJECT.

4. THE CONTRACTOR SHALL KEEP GATES CLOSED AND SECURE AT ALL TIMES. NO GATE

SHALL BE LEFT OPEN. IF AIRPORT ACCESS GATE IS TO BE LEFT OPEN, THE CONTRACTOR

SHALL PROVIDE A GATE GUARD.

5. CONSTRUCTION VEHICLES MUST BE MARKED WITH AMBER BEACONS (DAY/NIGHT) OR

ORANGE AND WHITE FLAGS DURING DAYLIGHT HOURS.

6. CONTRACTOR SHALL ELIMINATE FOREIGN OBJECT DEBRIS PER THE CONSTRUCTION

SAFETY PHASING PLAN.

7. TAXIING AIRCRAFT SHALL HAVE THE RIGHT OF WAY. CONSTRUCTION VEHICLES SHALL

YIELD TO TAXIING AIRCRAFT AT ALL TIMES IN ALL AREAS OF THE AIRPORT.

DRAWN BY:

M ay

- 5

:1 7p m F:

\P ro je ct

Ki ng m an A irp or t, AZ

I R ep la ce m en t\D es ig n\

\S he et

F ile s\ K3

G C-

.d wg

1 2 3 4

2575 East Camelback Road Suite 740

Phoenix, Arizona 85016 Phone: 602-997-7536

Fax: 602-755-2094 www.cscos.com

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

SHEET NO. OF

K32.007.008

MAY 2025

K.M. WATSON

A. STRONG

L.R. MCINTOSH

100% SUBMITTAL

NOT FOR

CONSTRUCTION

OVERALL

CONSTRUCTION

SAFETY AND

PHASING PLAN

GC100

4 25

N, A

A1 A3NOT USED GENERAL NOTES

OVERALL CONSTRUCTION SAFETY AND PHASING PLAN

SCALE: 1" = 500'

SCALE: NOT TO SCALE SCALE: NOT TO SCALE

400'

400 0 400 800FT.

A4 LEGEND

SCALE: NOT TO SCALE

THIS PLAN IS TO BE

PRINTED IN COLOR

WORK AREA SCHEDULE NOTES:

1. WORK AREA A SHALL BE PERFORMED WITHIN 14 CALENDAR DAYS.

2. WORK AREA B SHALL BE PERFORMED WITHIN 14 CALENDAR DAYS.

3. WORK AREA B SHALL FOLLOW THE COMPLETION OF WORK AREA A. WORK AREAS MAY

NOT BE PERFORMED CONCURRENTLY. TOTAL PROJECT TIME SHALL BE 28 CALENDAR

DAYS.

A2 PHASING SCHEDULE NOTES

SCALE: NOT TO SCALE

AutoCAD SHX Text

EXISTING T-SHADE STRUCTURE

AutoCAD SHX Text

EXISTING HANGAR BUILDING

AutoCAD SHX Text

rbehm Rectangle rbehm Snapshot rbehm

WORK AREA A

LIGHTED RUNWAY CLOSURE MARKING,

ITEM C-105, SEE DETAIL A4/GC501

TEMPORARY INTERLOCKING LOW PROFILE BARRICADES,

ITEM C-105, SEE DETAIL A2/GC501

CONTRACTOR ACCESS / HAUL ROUTE

CONTRACTOR'S STAGING AREA

Æ Æ Æ

RUNWAY 21 PAPI

RUNWAY 3 PAPI

OLYMPIC WAY

FLIGHTLINE DRIVE

SAN

TA FE D

IVE

GOVERNMENT WAY

FIN

C E W

TRANSPORT DRIVE

FLIGHTLINE DRIVE

T W

WINDROSE LN.

OLYMPIC WAY OLYMPIC WAY

M O

AVE AIR

T D R

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

R O

ROFA ROFA ROFA

RSA RSA RSA

RSA RSA RSARSA RSA RSA RSA RSA RSA RSA

RSA RSA RSA RSA RSA RSA RSA

ROFA

RSA

RUNWAY 3-21

4" TAXIWAY "D"

RUNWAY 17

-35

"D2"

TW "B"

TAXIW

AY "C

TW "C1"

"D1"

MILLENNIUM

AVIONICS

TAXIW

AY "A"

TAXIWAY "D" TW

Y "D3"

TOFA TOFA TOFA TOFA TOFA TOFA TOFA

Æ Æ Æ

Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ

Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ

Æ Æ

ÆÆÆÆÆÆ

Æ Æ Æ

Æ Æ Æ Æ Æ

Æ Æ

ÆÆÆÆÆ

Æ Æ Æ

Æ Æ

Æ Æ Æ Æ

1. SEE SHEETS GC101 AND GC102 FOR INDIVIDUAL WORK AREA INFORMATION.

2. CONTRACTOR SHALL COMPLY WITH THE CONSTRUCTION SAFETY PHASING PLAN IN

SECTION 70 OF THE CONTRACT DOCUMENTS.

3. ALL HAUL ROADS AND TEMPORARY ACCESS LOCATIONS SHALL BE RESTORED TO

ORIGINAL CONDITION BY THE CONTRACTOR AT THE COMPLETION OF THIS PROJECT.

4. THE CONTRACTOR SHALL KEEP GATES CLOSED AND SECURE AT ALL TIMES. NO GATE

SHALL BE LEFT OPEN. IF AIRPORT ACCESS GATE IS TO BE LEFT OPEN, THE CONTRACTOR

SHALL PROVIDE A GATE GUARD.

5. CONSTRUCTION VEHICLES MUST BE MARKED WITH AMBER BEACONS (DAY/NIGHT) OR

ORANGE AND WHITE FLAGS DURING DAYLIGHT HOURS.

6. CONTRACTOR SHALL ELIMINATE FOREIGN OBJECT DEBRIS PER THE CONSTRUCTION

SAFETY PHASING PLAN.

7. TAXIING AIRCRAFT SHALL HAVE THE RIGHT OF WAY. CONSTRUCTION VEHICLES SHALL

YIELD TO TAXIING AIRCRAFT AT ALL TIMES IN ALL AREAS OF THE AIRPORT.

SHEET NO. OF

K32.007.008

MAY 2025

K.M. WATSON

A. STRONG

L.R. MCINTOSH

100% SUBMITTAL

NOT FOR

CONSTRUCTION

SAFETY AND

PHASING PLAN -

WORK AREA A

GC101

5 25

N, A

DRAWN BY:

M ay

- 5

:1 8p m F:

\P ro je ct

Ki ng m an A irp or t, AZ

I R ep la ce m en t\D es ig n\

\S he et

F ile s\ K3

G C-

.d wg

1 2 3 4

2575 East Camelback Road Suite 740

Phoenix, Arizona 85016 Phone: 602-997-7536

Fax: 602-755-2094 www.cscos.com

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

A1 A3KEYED NOTES GENERAL NOTES

CONSTRUCTION SAFETY AND PHASING PLAN - WORK AREA A

SCALE: 1" = 500'

SCALE: NOT TO SCALE SCALE: NOT TO SCALE

400'

400 0 400 800FT.

100. LIGHTED RUNWAY CLOSURE MARKERS, SEE DETAIL A4, GC501.

101. CONTRACTOR ACCESS

A4 LEGEND

SCALE: NOT TO SCALE

THIS PLAN IS TO BE

PRINTED IN COLOR

WORK AREA SCHEDULE NOTES:

1. WORK AREA A SHALL BE PERFORMED WITHIN 14 CALENDAR DAYS.

2. WORK AREA B SHALL BE PERFORMED WITHIN 14 CALENDAR DAYS.

3. WORK AREA B SHALL FOLLOW THE COMPLETION OF WORK AREA A. WORK AREAS MAY

NOT BE PERFORMED CONCURRENTLY. TOTAL PROJECT TIME SHALL BE 28 CALENDAR

DAYS.

WORK AREA A NOTES:

1. WORK WITHIN THE RUNWAY 3-21 SAFETY AREAS SHALL BE PERFORMED DURING

SCHEDULED NIGHTIME CLOSURES OF RUNWAY 3-21 BETWEEN THE HOURS OF 9 PM AND

6 AM.

1.1. THE RUNWAY CLOSURES ARE TO BE COORDINATED WITH THE RPR AND AIRPORT

IN ADVANCE. THE AIRPORT REQUIRES AT LEAST 72 HOURS NOTICE FOR RUNWAY

CLOSURES.

A2 PHASING SCHEDULE NOTES

SCALE: NOT TO SCALE

AutoCAD SHX Text

EXISTING T-SHADE STRUCTURE

AutoCAD SHX Text

EXISTING HANGAR BUILDING

AutoCAD SHX Text

rbehm Rectangle rbehm Snapshot rbehm

WORK AREA B

LIGHTED RUNWAY CLOSURE MARKING,

ITEM C-105, SEE DETAIL A4/GC501

TEMPORARY INTERLOCKING LOW PROFILE BARRICADES,

ITEM C-105, SEE DETAIL A2/GC501

CONTRACTOR ACCESS / HAUL ROUTE

CONTRACTOR'S STAGING AREA

Æ Æ Æ

OLYMPIC WAY

FLIGHTLINE DRIVE

SAN

TA FE D

IVE

GOVERNMENT WAY

FIN

C E W

TRANSPORT DRIVE

FLIGHTLINE DRIVE

T W

WINDROSE LN.

OLYMPIC WAY OLYMPIC WAY

M O

AVE AIR

T D R

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

R O

ROFA ROFA ROFA

RSA RSA RSA

RSA RSA RSARSA RSA RSA RSA RSA RSA RSA

RSA RSA RSA RSA RSA RSA RSA

ROFA

RSA

RUNWAY 3-21

4" TAXIWAY "D"

RUNWAY 17

-35

"D2"

TW "B"

TAXIW

AY "C

TW "C1"

"D1"

MILLENNIUM

AVIONICS

TAXIW

AY "A"

TAXIWAY "D" TW

Y "D3"

TOFA TOFA TOFA TOFA TOFA TOFA TOFA

Æ Æ

ÆÆÆÆÆ

Æ Æ Æ

Æ Æ

Æ Æ Æ Æ

Æ Æ

ÆÆÆÆÆÆ

Æ Æ Æ

Æ Æ Æ Æ Æ Æ

Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ

Æ Æ Æ Æ Æ

Æ Æ Æ

Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ Æ

Æ Æ Æ Æ Æ

Æ Æ Æ Æ

ÆÆ

Æ Æ

1. SEE SHEETS GC101 AND GC102 FOR INDIVIDUAL WORK AREA INFORMATION.

2. CONTRACTOR SHALL COMPLY WITH THE CONSTRUCTION SAFETY PHASING PLAN IN

SECTION 70 OF THE CONTRACT DOCUMENTS.

3. ALL HAUL ROADS AND TEMPORARY ACCESS LOCATIONS SHALL BE RESTORED TO

ORIGINAL CONDITION BY THE CONTRACTOR AT THE COMPLETION OF THIS PROJECT.

4. THE CONTRACTOR SHALL KEEP GATES CLOSED AND SECURE AT ALL TIMES. NO GATE

SHALL BE LEFT OPEN. IF AIRPORT ACCESS GATE IS TO BE LEFT OPEN, THE CONTRACTOR

SHALL PROVIDE A GATE GUARD.

5. CONSTRUCTION VEHICLES MUST BE MARKED WITH AMBER BEACONS (DAY/NIGHT) OR

ORANGE AND WHITE FLAGS DURING DAYLIGHT HOURS.

6. CONTRACTOR SHALL ELIMINATE FOREIGN OBJECT DEBRIS PER THE CONSTRUCTION

SAFETY PHASING PLAN.

7. TAXIING AIRCRAFT SHALL HAVE THE RIGHT OF WAY. CONSTRUCTION VEHICLES SHALL

YIELD TO TAXIING AIRCRAFT AT ALL TIMES IN ALL AREAS OF THE AIRPORT.

SHEET NO. OF

K32.007.008

MAY 2025

K.M. WATSON

A. STRONG

L.R. MCINTOSH

100% SUBMITTAL

NOT FOR

CONSTRUCTION

SAFETY AND

PHASING PLAN -

WORK AREA B

GC102

6 25

N, A

DRAWN BY:

M ay

- 5

:1 8p m F:

\P ro je ct

Ki ng m an A irp or t, AZ

I R ep la ce m en t\D es ig n\

\S he et

F ile s\ K3

G C-

.d wg

1 2 3 4

2575 East Camelback Road Suite 740

Phoenix, Arizona 85016 Phone: 602-997-7536

Fax: 602-755-2094 www.cscos.com

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

A1 A3KEYED NOTES GENERAL NOTES

CONSTRUCTION SAFETY AND PHASING PLAN - WORK AREA B

SCALE: 1" = 500'

SCALE: NOT TO SCALE SCALE: NOT TO SCALE

400'

400 0 400 800FT.

A4 LEGEND

SCALE: NOT TO SCALE

100. LIGHTED RUNWAY CLOSURE MARKERS, SEE DETAIL A4, GC501.

101. CONTRACTOR ACCESS

THIS PLAN IS TO BE

PRINTED IN COLOR

WORK AREA SCHEDULE NOTES:

1. WORK AREA A SHALL BE PERFORMED WITHIN 14 CALENDAR DAYS.

2. WORK AREA B SHALL BE PERFORMED WITHIN 14 CALENDAR DAYS.

3. WORK AREA B SHALL FOLLOW THE COMPLETION OF WORK AREA A. WORK AREAS MAY

NOT BE PERFORMED CONCURRENTLY. TOTAL PROJECT TIME SHALL BE 28 CALENDAR

DAYS.

WORK AREA B NOTES:

1. WORK WITHIN THE RUNWAY 17-35 SAFETY AREAS SHALL BE PERFORMED DURING

SCHEDULED NIGHTIME CLOSURES OF RUNWAY 17-35 BETWEEN THE HOURS OF 9 PM

AND 6 AM.

1.1. THE RUNWAY CLOSURES ARE TO BE COORDINATED WITH THE RPR AND AIRPORT

IN ADVANCE. THE AIRPORT REQUIRES AT LEAST 72 HOURS NOTICE FOR RUNWAY

CLOSURES.

A2 PHASING SCHEDULE NOTES

SCALE: NOT TO SCALE

AutoCAD SHX Text

EXISTING T-SHADE STRUCTURE

AutoCAD SHX Text

EXISTING HANGAR BUILDING

AutoCAD SHX Text

rbehm Rectangle rbehm Snapshot rbehm

A4 SCALE: NOT TO SCALE

LIGHTED CLOSED RUNWAY MARKING DETAIL

L-893 LIGHTED VISUAL AID TO

INDICATE TEMPORARY RUNWAY

CLOSURE AS MANUFACTURED

BY HALI-BRITE, INC., SHERWIN

INDUSTRIES, INC., OR

APPROVED EQUAL. LIGHTED

CLOSED RUNWAY MARKING

SHALL BE PROVIDED BY THE

CONTRACTOR . CONTRACTOR

IS RESPONSIBLE FOR FUELING

AND ALL MAINTENANCE

REQUIRED DURING

CONSTRUCTION. COST SHALL

BE INCLUDED IN ITEM C-106.

NOTES:

1. CLOSED RUNWAY MARKINGS SHALL BE PLACED AT EACH END OF THE

RUNWAY DIRECTLY OR OR AS NEAR AS PRACTICABLE TO THE RUNWAY

DESIGNATION NUMBERS.

A2 SCALE: NOT TO SCALE

LOW PROFILE SAFETY BARRICADE DETAIL

BARRICADE NOTES:

1. MAXIMUM SPACING BETWEEN BARRICADES SHALL BE 5 FEET.

BARRICADES SHALL BE SET BACK 2 FEET FROM THE LIMITS OF

CONSTRUCTION.

2. THE CONTRACTOR SHALL BE RESPONSIBLE FOR PROVIDING BARRICADES

AND MAINTAINING LIGHTING AND PROPER POSITIONING.

3. WATER-FILLED TYPE BARRICADES SHALL BE USED (SEE SPECIFICATIONS)

4. BARRICADES SHALL HAVE TWO FLASHING LAMPS.

6"X6" WIDE REFLECTIVE STRIPING

INTERNATIONAL ORANGE AND WHITE

360° BATTERY/SOLAR

POWERED

RED FLASHING LAMP

(DUSK TO DAWN)

SHEET NO. OF

K32.007.008

MAY 2025

K.M. WATSON

A. STRONG

L.R. MCINTOSH

100% SUBMITTAL

NOT FOR

CONSTRUCTION

SAFETY AND

PHASING DETAILS

GC501

7 25

N, A

DRAWN BY:

M ay

- 9

:2 4p m F:

\P ro je ct

Ki ng m an A irp or t, AZ

I R ep la ce m en t\D es ig n\

\S he et

F ile s\ K3

G C-

.d wg

1 2 3 4

2575 East Camelback Road Suite 740

Phoenix, Arizona 85016 Phone: 602-997-7536

Fax: 602-755-2094 www.cscos.com

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

CABLE REMOVAL

DIRECT BURIAL:A.

IN CONDUIT:B.

ELECTRICAL DEMOLITION GENERAL NOTES:

WITHIN AREAS OF DEMOLITION, AND AS OTHERWISE SHOWN, CAREFULLY REMOVE IDENTIFIED LIGHT FIXTURES, BASES, ISOLATION TRANSFORMERS, HAND HOLES AND OTHER INDICATED ITEMS.

REMOVE FROM WITHIN MANHOLES AND HANDHOLES AND REMOVE IN AREAS WHERE EXCAVATION

REQUIRES DISTURBING.

REMOVE COMPLETELY BETWEEN NEAREST BASES, HANDHOLES OR MANHOLES.

AT INDICATED DEVICES TO BE REMOVED OR IN DEMOLITION AREAS INDICATED, REMOVE ALL CONDUCTORS BACK TO

NEAREST FIXTURE BASE OR HANDHOLE OUTSIDE DEMOLITION AREA.

FIXTURES, CABLES, CONDUITS, DUCTS, ETC. WHICH ARE NOT SPECIFICALLY INDICATED TO BE REMOVED (OR WHICH ARE SHOWN TO REMAIN WITHIN AREAS OF GENERAL DEMOLITION) SHALL REMAIN IN-PLACE AND FUNCTIONAL.

CONTRACTOR SHALL VERIFY EQUIPMENT AND CABLE DESIGNATIONS AND STATUS PRIOR TO REMOVAL OR

DISCONNECTING.

ALL REMOVED LIGHT FIXTURES, BASES, ISOLATION TRANSFORMERS, AND SIGNS SHALL BE SALVAGED AND DELIVERED TO KINGMAN MUNICIPAL AIRPORT OPERATIONS AND MAINTENANCE. ALL OTHER REMOVED MATERIAL SHALL BECOME THE PROPERTY OF THE CONTRACTOR AND SHALL BE REMOVED FROM THE SITE AND PROPERLY DISPOSED OF IN ACCORDANCE

WITH LOCAL ORDINANCES.

DRAWINGS MAY NOT DETAIL ALL EXISTING FACILITIES IN AREAS OF DEMOLITION. CONTRACTOR SHALL REVIEW THE

SITE AND RECORD DRAWINGS TO VERIFY THE DEMOLITION EFFORT INVOLVED.

8. CONTRACTOR SHALL BE REQUIRED TO HAVE A PRIVATE "ON-SITE" UTILITY LOCATING COMPANY AND POTHOLE

EXISTING UTILITY LINES AS NEEDED.

SHEET INDEX:

E-001 ELECTRICAL LEGEND AND NOTES

SELECTED FAA ADVISORY CIRCULARS FOR AIRPORT PROJECTS (LATEST VERSION):

CONCRETE ENCASEDCE

ELECTRICAL ABBREVIATIONS:

BARE COPPER CONDUCTOR (GROUND)BCC

SLURRY ENCASEDSE

FEDERAL AVIATION ADMINISTRATIONFAA

LIGHT EMITTING DIODELED

POLY-VINYL CHLORIDEPVC

CIRCUITCKT

SIGNSGN

LINEAR FEETLF

DIAMETERDIA

TYPICALTYP

TWO CONDUCTORS2/C

SINGLE CONDUCTOR1/C

NON-PAY ITEMNPI

RUNWAYS:C. REMOVE AND REPLACE FOR RECONNECTION INCREMENTALLY DURING EACH SHIFT

TO MAINTAIN CIRCUIT OPERATION AS REQUIRED BY AIRPORT.

ED-101 - ED-104 AIRFIELD ELECTRICAL DEMOLITION PLAN

GROUNDGND

EA-201 - EA-204 AIRFIELD ELECTRICAL PLAN

ELECTRICAL CONSTRUCTION PHASING NOTES

CONTRACTOR SHALL COORDINATE ALL WORK WITH AIRPORT MAINTENANCE, AIRPORT OPERATIONS, AND THE

ENGINEER AS NECESSARY.

CONTRACTOR SHALL GIVE 72 HOURS NOTICE PRIOR TO WORKING ON OR AROUND ANY DUCTBANKS, HANDHOLES, ETC.

CONTRACTOR SHALL MAINTAIN OR HAVE SUFFICIENT MATERIAL/ EQUIPMENT REQUIRED TO PROVIDE TEMPORARY LIGHTING AND CIRCUIT EXTENSIONS. THIS INCLUDES, BUT IS NOT LIMITED TO FIXTURES, TRANSFORMERS, BASES, CONDUIT, L-824 CABLE & L-823 SPLICE KITS. THESE ITEMS WILL NOT BE AVAILABLE FROM THE KINGMAN MUNICIPAL

AIRPORT MAINTENANCE SHOP.

THE CONTRACTOR SHALL MAINTAIN QUALIFIED PERSONNEL WITH THE APPROPRIATE EQUIPMENT, FOR THE INSTALLATION AND SPLICING OF AIRFIELD LIGHTING. SUCH PERSONNEL SHALL BE CAPABLE OF 60 MINUTE

RESPONSE TIME IF THEY ARE NOT ALREADY PRESENT ON THE AIRFIELD.

TURN OFF AND COVER EXISTING SIGNAGE THAT MAY POTENTIALLY MISDIRECT AIRCRAFT MOVEMENT INTO CLOSED AREAS BARRICADED FOR CONSTRUCTION. SIGNAGE REQUIRING PARTIAL COVERAGE WITH TAXIWAY LOCATION PANELS REMAINING VISIBLE SHALL REMAIN ON WITH ONLY DIRECTIONAL PORTIONS COVERED WITH SECTIONS OF DARK COLORED TARP OR DOUBLE-LAYERED BURLAP THAT DOES NOT PERMIT VISIBILITY OF COVERED PORTION OF ARRAY DAY OR NIGHT. COVERS SHALL BE SECURELY HELD IN PLACE BY RATCHETING LASHING STRAPS, NO TAPE OR

ADHESIVES WILL BE PERMITTED. SEE PHASING PLANS FOR PLACEMENT OF SIGN COVERS.

COVER EXISTING ELEVATED EDGE LIGHT FIXTURES IN CLOSED AREA BARRICADED FOR CONSTRUCTION WITH 4" PVC

PIPE. COVER SHALL EXTEND 2" MIN. ABOVE TOP OF FIXTURE.

PROVIDE ANY TEMPORARY AIRFIELD CIRCUIT JUMPERS REQUIRED TO MAINTAIN OPERATION OF ALL CIRCUITS AFFECTED BY CONSTRUCTION PRIOR TO START OF DEMOLITION. TEMPORARY CIRCUIT JUMPERS SHALL BE SLEEVED IN 2" CONDUIT, SANDBAGGED OR SECURED TO LOW-LEVEL BARRICADES. TEMPORARY CIRCUIT JUMPERS MAY BE ROUTED THROUGH NEW TAXIWAY CROSSINGS OR EXISTING SPARE CONDUITS AS REQUIRED AND SHALL BE COMPLETELY REMOVED WHEN NO LONGER REQUIRED FOR OPERATION. TEMPORARY JUMPER PLACEMENT SHALL

NOT AFFECT AIRCRAFT MOVEMENT OR AIRPORT OPERATIONS.

UNCOVER SIGNS AND EDGE LIGHT FIXTURES, REMOVE TEMPORARY JUMPERS, AND VERIFY OPERATION AT THE END

OF PROJECT.

ELECTRICAL GENERAL NOTES

GROUNDS RODS AND COUNTERPOISE WIRE ARE CONSIDERED INCIDENTAL TO FIXTURE AND CONDUIT INSTALLATION.1.

ELECTRICAL CONTRACTOR SHALL COORDINATE ALL DEMOLITION AND CONSTRUCTION WITH CIVIL CONTRACTOR TO

REDUCE CONFLICTS THAT AFFECT CONSTRUCTION PHASING AND SCHEDULING.

CONTRACTOR SHALL FIELD VERIFY ALL FIXTURE STATION AND OFFSETS AND CONFIRM ALL LOCATIONS ARE WITHIN

SPECIFICATION TOLERANCES.

EXISTING ELECTRICAL PULLBOX/HANDHOLE/JUNCTION CAN

EXISTING ELECTRICAL CONDUIT AND CONDUCTOR

ELECTRICAL LEGEND:

EXISTING ELEVATED EDGE LIGHT

PVC W/#8-5KV L-824 TYPE "C" CABLE PER INDICATED

LIGHTING CIRCUIT. (QUANTITY AND SIZE AS INDICATED

ON PLAN SHEETS)

EXISTING AIRFIELD GUIDANCE SIGN

(UNLESS OTHERWISE NOTED ON PLANS)

CONSTANT CURRENT REGULATOR CCR

RUNWAY END INDENTIFIER LIGHTREIL

EA-401 DUCTBANK DETAILS

EA-402 GROUNDING DETAILS

PRECISION APPROACH PATH INDICATORPAPI

EA-403 JUNCTION CAN DETAILS

EA-404 5KV SPLICE DETAIL

EA-405 RW 3-21 4-BOX PAPI DETAILS

150/5345-7 SPECIFICATION FOR L-824 UNDERGROUND ELECTRICAL CABLE FOR

AIRPORT LIGHTING CIRCUITS

150/5345-26 SPECIFICATION FOR L-823 PLUG AND RECEPTACLE, CABLE

CONNECTORS

150/5345-42 SPECIFICATION FOR AIRPORT LIGHT BASES, TRANSFORMER HOUSINGS,

JUNCTION BOXES, AND ACCESSORIES

150/5345-47 SPECIFICATION FOR SERIES TO SERIES ISOLATION TRANSFORMERS

FOR AIRPORT LIGHTING SYSTEMS

150/5345-53 AIRPORT LIGHTING EQUIPMENT CERTIFICATION PROGRAM

ADDENDUM AIRPORT LIGHTING EQUIPMENT CERTIFICATION PROGRAM

(PUBLISHED MONTHLY AND LISTING APPROVED SUPPLIERS)

150/5340-30 DESIGN & INSTALLATION DETAILS FOR AIRPORT VISUAL AIDS

150/5370-2 OPERATIONAL SAFETY ON AIRPORTS DURING CONSTRUCTION

150/5370-10 STANDARDS FOR SPECIFYING CONSTRUCTION OF AIRPORTS

150/5345-28 PRECISION APPROACH PATH INDICATOR (PAPI) SYSTEMS DIRECT EARTH BURIEDDEB

EA-301

DRAWN BY:

M ay

- 3

:3 6p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

E-

El ec tri ca l L eg en d.

dw g

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

ELECTRICAL LEGEND

AND NOTES

E-001 8 25

, A

EXISTING PAPI

EXISTING WINDCONE

EXISTING PAPI POWER EQUIPMENT RACK

E-002 OVERALL ELECTRICAL PLAN

NEW L-867E (24" DIA) JUNCTION CAN WITH BLANK COVER

NEW PAPI POWER CONTROL UNIT (IF REQUIRED), 600V

DISCONNECT, AND STEP-DOWN TRANSFORMER ON NEW

FRANGIBLE STRUT RACK ON NEW CONCRETE FOUNDATION

NEW PAPI LIGHT HOUSING ASSEMBLY ON EXISTING

CONCRETE FOUNDATION

EA-406 RW 17-35 2-BOX PAPI DETAILS

EA-407 PAPI POWER DISTRIBUTION EQUIPMENT DETAILS

PANEL C SCHEDULE AND PAPI 21 TRANSFORMER

REPLACEMENT

rbehm

DRAWN BY:

M ay

- 3

:3 7p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

E-

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

OVERALL

ELECTRICAL PLAN

E-002 9 25

, A

SEE SHEETS

ED-101 AND EA-201

SEE SHEETS

ED-102 AND EA-202

SEE S

HEETS

ED-10

3 A

ND E

A-20

SEE SHEETS

ED-10

4 A

ND EA-20

EXISTING AIRFIELD LIGHTING VAULT

(SEE SHEET EA-301 FOR PAPI 21

TRANSFORMER REPLACEMENT)

LOCATION

OF PAPI 3

LOCATION

OF PAPI 35

LOCATION

OF PAPI 21

LOCATION

OF PAPI 17

NOT TO SCALE

rbehm

ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST

EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

E E

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA

E E

XXXXXXXXXXX XXXXX XXX

DRAWN BY:

M ay

- 3

:3 8p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

-1

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

AIRFIELD ELECTRICAL

DEMOLITION PLAN

ED-101

10 25

, A

40'

40 0 40 80 FT.

EXISTING TAXIWAY D

TYP

EXISTING RUNWAY 3-21

1 2 TYP 12TYP

TYP4 TYP 4

4 TYP 4

CIRCUIT IDENTIFICATION

1 RUNWAY 3-21 CIRCUIT

2 TAXIWAY D CIRCUIT

REFERENCE NOTE

1 EXISTING CONDUIT AND CONDUCTOR TO REMAIN -

PROTECT IN PLACE.

3 EXISTING AIRFIELD GUIDANCE SIGN TO REMAIN -

PROTECT IN PLACE.

4 EXISTING ELEVATED LIGHT FIXTURE TO REMAIN -

PROTECT IN PLACE.

9 EXISTING WINDCONE TO REMAIN - PROTECT IN

PLACE.

1 1

KEYED MAP - RW 3-21

SHEET

ED-101 SHEET

ED-102

1 1 4

TYP411

TYP 114

PAPI 3 & REIL 3 CIRCUIT

EXISTING REIL CIRCUIT SPLICE TO PAPI HOMERUN

IN EXISTING RUNWAY EDGE LIGHT BASE CAN

1 REMOVE AND SALVAGE EXISTING PAPI LIGHT

HOUSING ASSEMBLIES, CONCRETE FOUNDATIONS

TO REMAIN (4 TOTAL)

REMOVAL NOTE

2 REMOVE AND SALVAGE EXISTING POWER/CONTROL

UNIT AND RACK. REMOVE EXISTING FOUNDATION.

(1 TOTAL)

3 REMOVE EXISTING CONDUCTOR, CONDUIT TO

REMAIN. (170 LF)

1 1 rbehm

E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

E E

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA

XXXXXXXXXXX XXXXX XXX

DRAWN BY:

M ay

- 3

:3 8p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

-1

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

AIRFIELD ELECTRICAL

DEMOLITION PLAN

ED-102

11 25

, A

40'

40 0 40 80 FT.

1 5 35 -1

EXISTING RUNWAY 3-21

TYP4 4

REFERENCE NOTE

1 EXISTING CONDUIT AND CONDUCTOR TO REMAIN -

PROTECT IN PLACE.

2 EXISTING HANDHOLE / PULLBOX TO REMAIN -

PROTECT IN PLACE.

3 EXISTING AIRFIELD GUIDANCE SIGN TO REMAIN -

PROTECT IN PLACE.

4 EXISTING ELEVATED LIGHT FIXTURE TO REMAIN -

PROTECT IN PLACE.

9 EXISTING WINDCONE TO REMAIN - PROTECT IN

PLACE.

CIRCUIT IDENTIFICATION

1 RUNWAY 3-21 CIRCUIT

3 RUNWAY 17-35 CIRCUIT

6 PAPI 21 & REIL 21 CIRCUIT

8 PAPI 17 CIRCUIT

10 TAXIWAY A/C CIRCUIT

2 2

3 8

1 1 6 1 1 6 1 1 6 1 1 6 1 1 6

3 6

1 10

3 81 6 10

138 1610

KEYED MAP - RW 3-21

SHEET

ED-101 SHEET

ED-102

11 EXISTING REIL CIRCUIT SPLICE TO PAPI HOMERUN

IN EXISTING RUNWAY EDGE LIGHT BASE CAN

1 REMOVE AND SALVAGE EXISTING PAPI LIGHT

HOUSING ASSEMBLIES, CONCRETE FOUNDATIONS

TO REMAIN (4 TOTAL)

REMOVAL NOTE

2 REMOVE AND SALVAGE EXISTING POWER/CONTROL

UNIT, DISCONNECT, TRANSFORMER AND RACK.

REMOVE EXISTING FOUNDATION. (1 TOTAL)

3 REMOVE EXISTING CONDUCTOR, CONDUIT TO

REMAIN. (190 LF)

1 1

TYP 4

1 1 6 rbehm

E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

E E

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

RSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSA

RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA

X X X X

DRAWN BY:

M ay

- 3

:3 9p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

-1

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

AIRFIELD ELECTRICAL

DEMOLITION PLAN

ED-103

12 25

, A

SHEET

ED-103

40'

40 0 40 80 FT.

REFERENCE NOTE

1 EXISTING CONDUIT AND CONDUCTOR TO REMAIN -

PROTECT IN PLACE.

2 EXISTING HANDHOLE / PULLBOX TO REMAIN -

PROTECT IN PLACE.

4 EXISTING ELEVATED LIGHT FIXTURE TO REMAIN -

PROTECT IN PLACE.

CIRCUIT IDENTIFICATION

3 RUNWAY 17-35 CIRCUIT

9 PAPI 35 CIRCUIT

EXISTING RUNWAY 35-17

1 3 TYP 13TYP

TYP4 TYP 4

TYP 4

139139139139139

1 3 1 3 9

KEYED MAP - RW 17-35

SHEET

ED-104

TYP4

1 3

3 9

1 REMOVE AND SALVAGE EXISTING PAPI LIGHT

HOUSING ASSEMBLIES, CONCRETE FOUNDATIONS

TO REMAIN (2 TOTAL)

REMOVAL NOTE

2 REMOVE AND SALVAGE EXISTING POWER/CONTROL

UNIT, DISCONNECT, TRANSFORMER AND RACK.

REMOVE EXISTING FOUNDATION. (1 TOTAL)

3 REMOVE EXISTING CONDUCTOR, CONDUIT TO

REMAIN. (100 LF)

rbehm

E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

E E

E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

E E

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA

X X X X

DRAWN BY:

M ay

- 3

:3 9p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

-1

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

AIRFIELD ELECTRICAL

DEMOLITION PLAN

ED-104

13 25

, A

40'

40 0 40 80 FT.

REFERENCE NOTE

1 EXISTING CONDUIT AND CONDUCTOR TO REMAIN -

PROTECT IN PLACE.

2 EXISTING HANDHOLE / PULLBOX TO REMAIN -

PROTECT IN PLACE.

4 EXISTING ELEVATED LIGHT FIXTURE TO REMAIN -

PROTECT IN PLACE.

9 EXISTING WINDCONE TO REMAIN - PROTECT IN

PLACE.

CIRCUIT IDENTIFICATION

3 RUNWAY 17-35 CIRCUIT

8 PAPI 17 CIRCUIT

EXISTING RUNWAY 35-17

1 3 8 TYP 138TYP

13TYP

1 3 TYP

13TYP1 3 TYP

TYP4 TYP

4 TYP

KEYED MAP - RW 17-35

SHEET

ED-103

SHEET

ED-104

1 3

1 REMOVE AND SALVAGE EXISTING PAPI LIGHT

HOUSING ASSEMBLIES, CONCRETE FOUNDATIONS

TO REMAIN (2 TOTAL)

REMOVAL NOTE

2 REMOVE AND SALVAGE EXISTING POWER/CONTROL

UNIT, DISCONNECT, TRANSFORMER AND RACK.

REMOVE EXISTING FOUNDATION. (1 TOTAL)

3 REMOVE EXISTING CONDUCTOR, CONDUIT TO

REMAIN. (90 LF)

3 8 rbehm

ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST

EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

E E

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA

E E

XXXXXXXXXXX XXXXX XXX

DRAWN BY:

M ay

- 3

:4 0p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

-2

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

AIRFIELD ELECTRICAL

PLAN

EA-201

14 25

, A

40'

40 0 40 80 FT.

EXISTING TAXIWAY D

EXISTING RUNWAY 3-21

12TYP

TYP 4

KEYED MAP - RW 3-21

SHEET

ED-201

SHEET

ED-202

REFERENCE NOTE

EXISTING CONDUIT AND CONDUCTOR

EXISTING EDGE LIGHT FIXTURE

EXISTING CONDUIT

APPROXIMATE SPLICE POINT OF EXISTING

CONDUIT AND COUNTERPOISE.

EXISTING AIRFIELD GUIDANCE SIGN

EXISTING WINDCONE9

4 TYP 4

1 1

RW 3 END AND REIL 3

TYP411

TYP 114

1 2 TYP

TYP43

CIRCUIT IDENTIFICATION

1 RUNWAY 3-21 CIRCUIT

2 TAXIWAY D CIRCUIT

4 PAPI 3 & REIL 3 CIRCUIT

TYP1 1 4

EXISTING REIL CIRCUIT SPLICED TO PAPI HOMERUN

IN EXISTING RUNWAY EDGE LIGHT BASE CAN

1 1

8 4

(1-2"C)

6 9

(1-2"C)

CONSTRUCTION NOTE

NEW 600V FUSED DISCONNECT AND PCU (IF

REQUIRED) ON NEW FRANGIBLE STRUT RACK ON

NEW CONCRETE FOUNDATION (1 TOTAL)

10 NEW L-867E (24" DIA.) JUNCTION CAN WITH BLANK

COVER (1 TOTAL)

NEW L-880(L) LED 4-BOX PAPI ON EXISTING

CONCRETE FOUNDATIONS, AIMED, AND FLIGHT

TESTED COMPLETE. (1 TOTAL)

NEW 1-2"C DEB (160 LF)

NEW 2-2"C DEB (150 LF

8 NEW 2/C #8-5KV L-824, TYPE "C" AIRFIELD LIGHTING

CABLE, #8 GND (480V NAVAID) (350 LF)

9 NEW 3-#10, #10 GND AND TILT INTERCONNECT

CABLES (PAPI POWER AND CONTROL) (325 LF)

JC -1

N: 15477887.63 E: 641238.23

NOTE:

NORTHING AND EASTING COORDINATES GIVEN

ARE THE GEOMETRIC CENTER OF THE NEW

CONCRETE FOUNDATION FOR THE NEW PAPI

POWER AND CONTROL EQUIPMENT.

(1-2"C)

(1-2"C) rbehm

E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

E E

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA

XXXXXXXXXXX XXXXX XXX

DRAWN BY:

M ay

- 3

:4 0p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

-2

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

AIRFIELD ELECTRICAL

PLAN

EA-202

15 25

, A

40'

40 0 40 80 FT.

1 5 35 -1

EXISTING RUNWAY 3-21

TYP4 43

2 2

3 8

1 1 6 1 1 6

1 1 6

1 1 6 1 1 6

1 10

3 81 6 10

1 REIL 21 AND RW 21 END

138 1610

KEYED MAP - RW 3-21

SHEET

EA-201

SHEET

EA-202

REFERENCE NOTE

EXISTING CONDUIT AND CONDUCTOR

EXISTING HANDHOLE/JUNCTION CAN

EXISTING EDGE LIGHT FIXTURE

EXISTING CONDUIT

APPROXIMATE SPLICE POINT OF EXISTING

CONDUIT AND COUNTERPOISE.

EXISTING AIRFIELD GUIDANCE SIGN

EXISTING WINDCONE9

CIRCUIT IDENTIFICATION

1 RUNWAY 3-21 CIRCUIT

3 RUNWAY 17-35 CIRCUIT

6 PAPI 21 & REIL 21 CIRCUIT

8 PAPI 17 CIRCUIT

10 TAXIWAY A/C CIRCUIT

8 6

(1-2"C)

4 8 6

6 8 6

(1-2"C)

6 9

CONSTRUCTION NOTE

NEW 600V FUSED DISCONNECT, STEP-DOWN

TRANSFORMER, AND PCU (IF REQUIRED) ON NEW

FRANGIBLE STRUT RACK ON NEW CONCRETE

FOUNDATION (1 TOTAL)

10 NEW L-867E (24" DIA.) JUNCTION CAN WITH BLANK

COVER (1 TOTAL)

NEW L-880(L) LED 4-BOX PAPI ON EXISTING

CONCRETE FOUNDATIONS, AIMED, AND FLIGHT

TESTED COMPLETE. (1 TOTAL)

NEW 1-2"C DEB (165 LF)

NEW 2-2"C DEB (155 LF)

8 NEW 2/C #8-5KV L-824, TYPE "C" AIRFIELD LIGHTING

CABLE, #8 GND (480V NAVAID) (336 LF)

9 NEW 3-#10, #10 GND AND TILT INTERCONNECT

CABLES (PAPI POWER AND CONTROL) (330 LF)

EXISTING REIL CIRCUIT SPLICED TO PAPI HOMERUN

IN EXISTING RUNWAY EDGE LIGHT BASE CAN

TYP 4

1 1 645

JC -2

N: 1550878.70

E: 645387.28 NOTE:

NORTHING AND EASTING COORDINATES GIVEN

ARE THE GEOMETRIC CENTER OF THE NEW

CONCRETE FOUNDATION FOR THE NEW PAPI

POWER AND CONTROL EQUIPMENT.

rbehm

E E

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

RSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSARSA

RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA

X X X X

DRAWN BY:

M ay

- 3

:4 1p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

-2

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

AIRFIELD ELECTRICAL

PLAN

EA-203

16 25

, A

SHEET

EA-203

40'

40 0 40 80 FT.

EXISTING RUNWAY 35-17

1 3 TYP 13TYP

TYP4 TYP 4

RW 35 END

1 3 1 3 9

KEYED MAP - RW 17-35

SHEET

EA-204

REFERENCE NOTE

EXISTING CONDUIT AND CONDUCTOR

EXISTING HANDHOLE/JUNCTION CAN

EXISTING EDGE LIGHT FIXTURE

EXISTING CONDUIT

APPROXIMATE SPLICE POINT OF EXISTING

CONDUIT AND COUNTERPOISE.

CIRCUIT IDENTIFICATION

3 RUNWAY 17-35 CIRCUIT

9 PAPI 35 CIRCUIT

CONSTRUCTION NOTE

NEW 600V FUSED DISCONNECT, STEP-DOWN

TRANSFORMER, AND PCU (IF REQUIRED) ON NEW

FRANGIBLE STRUT RACK ON NEW CONCRETE

FOUNDATION (1 TOTAL)

10 NEW L-867E (24" DIA.) JUNCTION CAN WITH BLANK

COVER (1 TOTAL)

NEW L-881(L) LED 2-BOX PAPI ON EXISTING

CONCRETE FOUNDATIONS, AIMED, AND FLIGHT

TESTED COMPLETE. (1 TOTAL)

NEW 1-2"C DEB (85 LF)

NEW 2-2"C DEB (125 LF)

8 NEW 2/C #8-5KV L-824, TYPE "C" AIRFIELD

LIGHTING CABLE, #8 GND (480V NAVAID) (245 LF)

9 NEW 3-#10, #10 GND AND TILT INTERCONNECT

CABLES (PAPI POWER AND CONTROL) (200 LF)

1 3

8 9

(1-2"C)

6 9

(1-2"C)

TYP 139TYP

JC -3

N: 1547925.92 E: 644199.32

NOTE:

NORTHING AND EASTING COORDINATES GIVEN

ARE THE GEOMETRIC CENTER OF THE NEW

CONCRETE FOUNDATION FOR THE NEW PAPI

POWER AND CONTROL EQUIPMENT.

rbehm

E E

E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

E E

ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA ROFA

RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA RSA

X X X X

DRAWN BY:

M ay

- 3

:4 1p m Q

:\P

Ki ng m an A irp or t R W

-2

I R ep la ce m en ts \C

-2

.d wg

1 2 3 4

C&S Engineers, Inc.

CONTRACTOR SHALL VERIFY ALL CONDITIONS

ON JOB SITE & NOTIFY THE OWNER OF ANY

VARIATIONS FROM DIMENSIONS SHOWN ON

THESE DRAWINGS BEFORE PROCEEDING WITH

ANY CONSTRUCTION.

MARK DATE DESCRIPTION

REVISIONS

PROJECT NO:

DATE:

CHECKED BY:

16719 East Palisades Blvd., Suite 202

Fountain Hills, AZ 85268

Phone: (480) 816-5541

Fax: (480) 816-5540 www.creng.com

SHEET NO. OF

K32.007.008

MAY 2025

JBW

AIRFIELD ELECTRICAL

PLAN

EA-204

17 25

, A

40'

40 0 40 80 FT.

EXISTING RUNWAY 35-17

1 3 8 TYP 138TYP

13TYP

1 3 TYP

13TYP1 3 TYP

TYP4 TYP

4 TYP

RW 17 END

KEYED MAP - RW 17-35

SHEET

EA-203

SHEET

EA-204

REFERENCE NOTE

EXISTING CONDUIT AND CONDUCTOR

EXISTING HANDHOLE/JUNCTION CAN

EXISTING EDGE…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated May 1, 2026.