SOLICITATION_PROVISIONS.pdf

SOLICITATION PROVISIONS

ADDENDUM TO FAR 52.212-1 INSTRUCTIONS TO OFFERORS

The US Department of Homeland Security (DHS), Office of Procurement Operations, Federal Protective Service (FPS) is issuing this competitive request for proposals (RFP) to solicit offers for the purpose of awarding a contract to provide the services described herein. DHS/OPO/FPS (the Government) will conduct this acquisition using the procedures of Part 12 of the Federal Acquisition Regulations.

Proposals are due no later than the date and time specified in block 8 of the SF1449. Submissions shall be made via hard copy to the address specified in block 9 of the SF1449 to the attention of Josh Clemens.

Any proposal received at the Government office designated in the RFP after the exact time for receipt of proposals specified above will be deemed “late” and will be considered only in accordance with the provisions set forth under FAR 52.212-1, Instructions to Offerors – Commercial Items, paragraph (f).

By submitting a proposal, the Contractor agrees to comply with all terms and conditions set forth in this RFP, including the Statement of Work (SOW).

FAR 52.212-2 EVALUATION – COMMERCIAL ITEMS (Oct 2014) (Tailored)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. In addition to price, the following technical evaluation factor shall be used to evaluate offers and are listed in descending order of importance. Relevant Past Performance and Technical Approach are both significantly more important than the DHS Mentor Protégé Program Participation.

Relevant Past Performance Technical Approach DHS Mentor Protégé Program Participation

The technical evaluation factors, when combined, are significantly more important than price.

The Government reserves the right to obtain information for use in the evaluation of past performance from any and all sources including sources outside of the Government. Offerors lacking relevant past performance history will not be evaluated favorably or unfavorably on past performance. The Government will consider the quality of an offeror’s past performance. This consideration is separate and distinct from the Contracting Officer’s responsibility determination.

The assessment of the offeror’s relevant past performance will be used as a means of evaluating the relative capability of the offeror and other competitors to successfully meet the requirements of the RFP. In determining the rating for the past performance evaluation factor, the Government will give greater consideration to the contracts which the Government feels are most relevant to the RFP.

The Government reserves the right to award the contract to other than the lowest priced offeror.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options (including the 6 month option available under FAR 52.217-8) to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

Proposal Submission Requirements

1. Standard Form 1449, Solicitation/Contract/Order for Commercial Items – When responding to this RFP the Contractor must use the Standard Form 1449 as a cover page to the proposal.

2. Proposals shall be comprised of TWO (2) separate sealed envelopes. The first envelope shall contain five (5) copies of the technical (non-price) submission. The second envelope shall contain the original and one copy of the pricing submission and all other documents required by the solicitation (e.g. SF 1449, Pricing Schedule, Disclosures, Representation & Certifications, Subcontracting Plan (if applicable), etc.). Both of these envelopes should then be sealed in a third envelope that clearly identifies the RFP for which it is being submitted.

3. Page Limitation - Excluding the cover page and past performance forms and questionnaires, the technical proposal (covering all non-price factors) is limited to fifteen (15) pages in at least 11pt. font and 1” margins. Pages in excess of this limitation will not be evaluated.

4. Contractors are informed that it is the Government’s desire to make award on initial proposals when deemed possible by the Contracting Officer, however the Government reserves the right to communicate and/or negotiate with offerors if later determined necessary.

5. Proposals shall specify the offer expiration date. Offerors shall hold their offers valid for 120 days after the solicitation closing date, unless requested to further extend it by the Contracting Officer.

6. Offerors, other than small businesses, shall prepare and submit with their proposal an individual type Small Business Subcontracting Plan.

a. Offerors should thoroughly review the requirements set forth in FAR 19.704, Subcontracting plan requirements, and FAR Clause 52.219-9, Small Business Subcontracting Plan, before submitting their Plans. The subcontracting plan shall state separately the total dollars and percentages that will be subcontracted to each category; large business, small business (SB), HUBZone small business, small disadvantaged business (SDB), women-owned small business (WOSB), and service-disabled veteran-owned small business (SDVOSB) concerns.

b. Subcontracting plans must be consistent with the provisions of the above Clause and are subject to negotiations along with the terms and conditions of any contract resulting from this solicitation. The successful offeror’s subcontracting plan must be approved by the Contracting Officer prior to award and shall be incorporated into the resultant contract. The Contracting

Officer will monitor, evaluate and document contractor performance in adhering to 52.219-9 and meeting its subcontracting goals as set forth in its approved plan.

c. The DHS subcontracting goals for Fiscal Year 2015 are listed below and shall be utilized for developing a subcontracting plan in response to this solicitation.

Percentage of Total Subcontracting Dollars SB Subcontracts 41.0% SDB Subcontracts 5.0% WOSB Subcontracts 5.0% HUBZone Subcontracts 3.0%

SDVOSB

Subcontracts 3.0%

Technical Proposal (Non-price factors) – The government shall incorporate all elements of the successful contractor’s technical proposal (in full or by reference), except for Relevant Past Performance information, into any contract resulting from this RFP. The Contractor is required to submit the following technical (non-price) information:

1. Relevant Past Performance:

The Contractor shall demonstrate relevant past performance on contracts currently being performed or performed within the past three (3) years or affirmatively state that it possesses no relevant past performance. The Government will determine relevance by analyzing the “scope”, “magnitude” and “complexity” of the reference contracts and comparing them to the instant requirement. The Government reserves the right to evaluate submitted projects individually or in the aggregate in order to determine relevance and will do so consistently across all evaluated offers. The Government will also consider the quality of the Contractor’s relevant past performance.

Reference Contracts:

a. The Contractor shall submit up to a maximum of three (3) contracts for evaluation. The Government reserves the right to obtain information from sources other than those identified by the Contractor.

b. If a teaming arrangement is being proposed, refer to Notes #1 and 2 below for additional proposal submission requirements.

Past Project Form. The Contractor shall complete a Past Project Form for each reference contract submitted.

Past Performance Questionnaires.

a. Past Performance Questionnaires shall be submitted for each reference contract unless a Contract Performance Assessment Report (CPARS) for the most recently completed performance period is resident in the Past Performance Information Retrieval System (PPIRS) for the reference contract. At their discretion, offerors may supplement their PPIRS report by having a Past Performance Questionnaire completed and submitted.

b. For each contract requiring submission of a questionnaire, the Contractor shall forward the Past Performance Questionnaire to a cognizant representative of the customer organization that purchased the services from your company to provide feedback (e.g. Project Manager, Contracting Officer’s Representative). The Contractor shall instruct the customer representative to complete the questionnaire and return it, by the RFP submission due date, directly to Josh Clemens by email at josh.b.clemens@hq.dhs.gov or, by mail to Josh Clemens at U.S. Department of Homeland Security, Federal Protective Service Acquisition Division, 701 Market St., Suite 3200, Philadelphia, PA 19106.

Minimum Submission Requirements Relevant Past Performance: Offerors shall submit as a minimum the following to demonstrate the above:

A Past Project Form (Attachment 2) for each reference contract submitted. (Note: please be sure to utilize the most up-to-date version of this form, included in the solicitation.)

A Past Performance Questionnaire (Attachment 3) for each reference contract unless a Contractor Performance Assessment Report (CPAR) for the most recently completed performance period is resident in PPIRS for the reference contract. (Note: if a CPAR is included in the Past Performance Information Retrieval System (PPIRS), please be sure to indicate that in the applicable section of the Past Project Form.

A narrative describing the teaming arrangement or the actual Teaming Agreement (if one exists), if a teaming arrangement is being proposed. (See Notes #1 and 2 below)

Notes for Relevant Past Performance:

1. Where a teaming arrangement (as defined at FAR Subpart 9.6) is proposed, an additional maximum of up to three (3) projects for partner(s)/subcontractor(s) shall be submitted. Thus a maximum of no more than six (6) projects (3 for the prime and 3 for the subcontractors or other partners) shall be submitted in total.

2. Where a teaming arrangement is proposed, a narrative and/or the actual Teaming Agreement if one exists shall be submitted as part of the proposal by the managing partner of the joint venture or the prime contractor. The narrative shall include the roles, responsibilities, and distribution of effort (by type and percentage) between the parties in performance of the Government’s requirement and this narrative may enhance the Government’s understanding of your proposal. This narrative and/or Teaming Agreement will not count against the stated page size limitation.

2. Technical Approach:

The contractor shall specifically describe how its proposed x-ray machines meet each of the Government’s minimum requirements for each type of x-ray machine per Table 1: Technical Performance Specifications.

TABLE 1: Technical Performance Specifications Mailroom/Compact

Security Screening Standard/Personnel Security Screening

Midsize Parcel Security Screening

Large Parcel/Loading Dock Security Screening

Wire Gauge 38 AWG Standard 39 AWG Standard 40 AWG 36 AWG Standard

Detected (minimum)

39 AWG Typical

41 AWG Typical Standard 41 AWG Typical

39 AWG Typical

Penetration- Steel (minimum)

27 mm Standard 30 mm Typical

35 mm Standard 37 mm Typical

35mm Standard 37mm Typical

27 mm Standard 30mm Typical

X-ray Generator Voltage

<140kV <160kV <160kV <140kV

Tunnel Size must accommodate package sizes indicated

As large as 60 cm wide x 32 cm high (24”w x12”h)

As large as 620mm wide x 459mm high (24.3”w x 18.2” h)

As large as 75.5 cm wide x 55.5 cm high (30”w x 22” h)

As large as 1010mm wide x 1009mm high (39.7” w x 39.6”h)

Minimum Conveyor Load Rating (evenly distributed)

100 kg (220 lbs.) 159.5 kg (351.5lbs.) 160 kg (352 lbs.) 199 kg (439 lbs.)

Software Features

Materials Distinction Threat Image Projection (or similar software).

User Training Min 16x Digital Zoom Automatic Image Archive

Materials Distinction Threat Image Projection (or similar software).

User Training Min 16x Digital Zoom Automatic Image Archive

Materials Distinction Threat Image Projection (or similar software). User Training Min 16x Digital Zoom Automatic Image Archive

Materials Distinction Threat Image Projection (or similar software). User Training Min 16x Digital Zoom Automatic Image Archive

Maintenance and Service Agreement

Duration of Lease Duration of Lease Duration of Lease

Duration of Lease

Film safety ISO 1600 ISO 1600 ISO 1600 ISO 1600 Dimensions (Not Including Roller Tables)

Must be less than or equal to 54.3”L x31.4” W x44.1” H

Must be less than or equal to 79”L x 34” W x 50.8” H

Must be less than or equal to 83.5” L x38.8” W x 56.9” H

Must be less than or equal to 141.5” Lx 50.5” Wx76.5” H

Weight No Greater than 772 lbs.

No Greater than 883 lbs.

No Greater than

1287.7 lbs.

No Greater than

2050.5 lbs.

Roller Tables to fit machines (minimum)

Entrance and Exit

-Short (30” W x 20” L )

-Long (30”W x 40”L)

Entrance and Exit

-Short (30” W x 20” L )

Entrance and Exit

-Short (30” W x 20” L )

Entrance and Exit

-Short (30” W x 20” L )

Minimum Submission Requirements Technical Approach Factor: Offerors shall submit as a minimum the following to demonstrate the above:

Offerors shall specifically describe how its proposed x-ray machines meet each of the Government’s minimum requirements for each type of x-ray machine per Table 1: Technical Performance Specifications

3. DHS Mentor Protégé Program Participation:

Large Business Concerns shall address Prime Contractor Participation in the DHS Mentor Protégé Program. In order to receive credit, the offeror shall provide a signed letter of mentor-protégé agreement approval from the DHS Office of Small Disadvantaged Business Utilization (OSDBU). Agreements approved by other agencies are not acceptable.

Large Businesses may be given additional credit for participating in the DHS Mentor Protégé Program.

Additional credit will only be applied when comparing the offer of one large business to the offer of another large business. A large business will not be given credit for this factor when comparing the offer of a large business concern to the offer of a small business concern. The contracting officer may, in his or her discretion, give credit for approvals that occur after initial evaluation of proposals, but before final evaluation.

Minimum Submission Requirements DHS Mentor Protégé Program Participation: Offerors shall submit as a minimum the following to demonstrate the above:

Large Business Concerns only shall address Prime Contractor Participation in the DHS Mentor Protégé Program.

Price Proposal

1. Using the Pricing Schedule, the Contractor must submit unit prices and extended prices (i.e. Unit Price x Estimated Quantity) for every line item listed under each potential ordering period. The Contractor must also provide a Total Estimated Price for each potential ordering period (i.e. the sum of all line items within that performance period). Contractors submitting partial pricing information shall be ineligible for award. The unit price prevails if a discrepancy exists between the unit price and the extended price.

2. The Contractor’s price shall be inclusive of all the Contractor’s direct costs, indirect costs and profit and shall include all costs associated with providing the services described in the Statement of Work and the Contractor’s technical proposal.

3. Prices (for the ordering periods) will be evaluated to ensure that they are fair and reasonable for performance of the requirements established in the RFP and as proposed in the technical submission.

4. The Contractor is cautioned that its proposal may be rejected if it is found to be materially unbalanced in any ordering period. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more line items is significantly overstated or understated.

5. The Government shall not be responsible for compensating the Contractor for any costs tied to solicitation requirements but not factored into the proposed prices, either by the Contractor’s intention or by mistake.

6. Prior to award the Contractor may be required to furnish the following information to establish the company’s financial responsibility in accordance with FAR 9.104-1:

A. The last three years of audited financial statements (includes balance sheet, income statement, and statement of cash flows). Unaudited financial statements may be requested if audited do not exist.

The Contractor may be requested to provide written confirmation that the provided financial statements include disclosure of all off-balance sheet arrangements and related party transactions as defined as follows:

• Off-balance sheet arrangements may involve, but are not limited to, unconsolidated, non-independent, limited purpose entities, often referred to as structured finance or special purpose entities. These entities may be in the form of corporations, partnerships, limited liability companies, trusts, structured finance entities or other types of agreements, relationships or understandings.

These entities may be used to provide financing, liquidity, market risk or credit support, or involve leasing, hedging, and/or research and development services.

• Related party transactions are defined in Statement of Financial Accounting

Standards No. 57, Related Party Disclosures, and include, but are not limited to, transactions between any organizations, divisions, subdivisions, or affiliates under common control.

B. The last two quarters of filed payroll tax returns (Federal Tax Return Form 941) and evidence of payment. (Evidence of payment may include copies of canceled checks, receipts from the bank, receipts from electronic fund transfers, and/or similar information from an external payroll service) If unpaid payroll taxes are owed to the Internal Revenue Service (IRS), provide any agreements with IRS to make timely payments and evidence those payments are being made.

Basis for Selection

The Government will select the responsible Contractor whose proposal, in conforming to this RFP, provides the overall best value to meet the Government’s requirements, price and non-price factors considered. Only apparent successful contractors determined to be responsible pursuant to FAR 9.104-1 will be issued a contract.

Notice of Award

A written notice of award or acceptance of a proposal, mailed or otherwise furnished to the successful offeror, within the time for acceptance specified in the offer, shall result in a binding agreement without further action by either party. Before the proposal’s specified expiration time, the Government may accept an offer, whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before the award.

Questions

The Contractor is requested to submit any questions regarding this requirement via email as soon as possible but no later than close of business 7 calendar days after issuance of the RFP to josh.b.clemens@hq.dhs.gov. Prospective contractors may contact the Government while preparing a proposal in order to obtain clarification of the statement of work or to obtain other information needed to prepare a proposal. Any clarifying information issued by the Government will be provided to all prospective contractors.

52.212-3 Offeror Representations and Certifications—Commercial Items (Mar 2015)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) website accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision.

(a) Definitions. As used in this provision— “Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation”, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the http://www.acquisition.gov/ http://uscode.house.gov/

Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174).

Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

“Sensitive technology”—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern”, consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that—

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by— http://uscode.house.gov/ http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t37t40+200+2++%2838%29%20%20AND%20%28%2838%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t37t40+200+2++%2838%29%20%20AND%20%28%2838%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at

38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program” (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph

(b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications— Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________.

[Offeror to identify the applicable paragraphs at (c) through (p) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t37t40+200+2++%2838%29%20%20AND%20%28%2838%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://www.acquisition.gov/ https://acquisition.gov/far/current/html/Subpart%204_12.html#wp1073667

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it o is, o is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it o is, o is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it o is, o is not a service-disabled veteran-owned small business concern. ,

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it o is, o is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is, o is not a women-owned small business concern.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It o is, o is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It o is, o is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It o is, o is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It o is, o is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: __________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that—

(i) It o is, o is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and

(ii) It o is, o is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Representations required to implement provisions of Executive Order 11246—

(1) Previous contracts and compliance. The offeror represents that—

(i) It o has, o has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It o has, o has not filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that—

(i) It o has developed and has on file, o has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 cfr parts 60-1 and 60-2), or

(ii) It o has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of

Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American—Supplies, is included in this solicitation.)

(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States.

The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American— Supplies.”

(2) Foreign End Products:

Line Item No. Country of Origin

[List as necessary]

(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(g)(1) Buy American—Free Trade Agreements—Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American—Free Trade Agreements—Israeli Trade Act, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements–Israeli Trade Act.”

(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements— Israeli Trade Act”:

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

https://acquisition.gov/far/current/html/52_223_226.html#wp1192900 https://acquisition.gov/far/current/html/FARTOCP25.html#wp225048 https://acquisition.gov/far/current/html/52_223_226.html#wp1169038

Line Item No. Country of Origin

[List as necessary]

(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph

(2) of the definition of “domestic end product.”

Other Foreign End Products:

Line Item No. Country of Origin

[List as necessary]

(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(2) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

Canadian End Products:

Line Item No.

[List as necessary]

(3) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

https://acquisition.gov/far/current/html/FARTOCP25.html#wp225048

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

Canadian or Israeli End Products:

Line Item No. Country of Origin

[List as necessary]

(4) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American-Free Trade Agreements-Israeli Trade Act”:

Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

Line Item No. Country of Origin

[List as necessary]

(5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled “Trade Agreements.”

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products:

Line Item No. Country of Origin

[List as necessary] https://acquisition.gov/far/current/html/52_223_226.html#wp1169151

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute.

The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.

(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals—

(1) o Are, o are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;

(2) o Have, o have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property;

(3) o Are, o are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and

(4) o Have, o have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied.

(i) Taxes are considered delinquent if both of the following criteria apply:

(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.

(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.

(ii) Examples.

(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.

(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.

https://acquisition.gov/far/current/html/FARTOCP25.html#wp225048

(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.

(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code).

(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).]

(1) Listed end products.

Listed End Product Listed Countries of Origin

(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.]

[ ] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.

[ ] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.

(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly—

(1) o In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) o Outside the United States.

(k) Certificates regarding exemptions from the application of the Service Contract Labor

Standards(Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or…