Attachment_4-Technical_Capability_Checklist.pdf

PDF 45 KB Posted

Attached to
Emergency Disaster Survivor (EDS) Cots Federal contract opportunity
Solicitation number
HSFE70-16-R-0002
Issued by
Federal Emergency Management Agency Recovery Section

About this file

Attachment 4 - Technical Capability Checklist

View the file

Other files for this federal contract opportunity

Other files attached to Emergency Disaster Survivor (EDS) Cots, newest first.
File Type Posted
Question_ _Answer_Sheet_for_HSFE70-16-R-0002.xlsx XLSX spreadsheet
Page_8_from_EDS_Cots_Solicitation_HSFE70-16-R-0002_Amendment_I.pdf PDF
EDS_Cots_Solicitation_HSFE70-16-R-0002_Amendment_I_Consolidated.pdf PDF
Attachment_2_-_Delivery.pdf PDF
EDS_Cots_Solicitation_HSFE70-16-R-0002.pdf PDF
Attachment_1-SOW.pdf PDF
Attachment_3-Price_Spreadsheet.xlsx XLSX spreadsheet
Statement_of_Work.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

HSFE70-16-R-0002 Attachment 4-Technical Capability Checklist Company Name:

Ref: # Specification Yes No

Cot height is at least 17” without mattress and no more than a height of 19” with mattress.

Cot width is at least 30” and no more than 36”.

3 Cot is at least 80” in length.

Cot is able to support a minimum of 350 lbs.

Cot has safety rails that provide ease of use for raising, leaning back, lowering onto and lifting off of the cot.

Cot head can be elevated to multiple positions, including, but not exceeding, a forty-five degree angle.

Cot has durable locking systems (e.g. latches, brackets) that do not have any sharp edges

All fitted connections on the cot (slots, edges and tubing ends, etc.) must be capped.

Cot has no sharp edges or components in which fingers, toes and other body parts could be caught, torn or otherwise injured.

Cot corners and edges are rounded.

If coils and/or fabric are used in the construction of the cot, the fabric is durable and the coils and coil ends do not pose a cutting, tearing or pinching hazard.

Cot possesses stable, “anti-tipping” legs that will withstand transfer to and from the cots by all users with mobility disabilities transferring from mobility devices.

Cot frame is fire retardant.

Cot frame and mattress can be sanitized after use.

Cot includes a mattress which fits the cot.

Cot mattress is at least two inches thick.

Cot mattress is of medium firmness.

The mattress can be secured to the cot to prevent falling or slippage.

Mattress is made of foam.

Mattress is not made of polyurethane.

Mattress does not contain latex based products

Cot and mattress can withstand use in relative humidity over 80%

Mattress (entire) is fully assembled.

Mattress outer shell is waterproof.

25 Mattress outer shell is durable.

Cot and mattress are resistant to mildew and rust.

Cot and mattress (entire) can withstand use in a temperature range of -20 to 120 degrees Fahrenheit.

Cot and mattress can withstand use in areas with high amounts of dust and/or other airborne particles and debris.

Offeror provides a commercial warranty for full replacement if product tears, breaks or otherwise fails during normal use within 1 (one) year of purchase.

Cot arrives fully assembled with the exception of the safety rails.

Complete cot unit can be assembled in ten minutes or less.

Complete cot unit weighs no more than 40lbs.

Cost can be folded and stacked for storage following use.

Offeror can deliver the initial order within thirty days of award.

Offeror has a one-time surge capacity to deliver 1,500 cots within 72 hours of delivery order receipt.

Offeror has a prolonged surge capacity to deliver at least 10,000 cots within 30 days.

Offeror can deliver to all of the stated locations.

Offeror certifies that the product meets all of the above specifications.

File details come from the government source that posted it. Updated .