HHSI02-19-R-0011_A0001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

A0001

See Continuation page.

Indian Health Service – Division of Engineering Services 1301 Young Street, Suite 1071 Dallas, Texas 75202

See Item 6

HHSI02-19-R-0011

1 23

03/07/2019

01/29/2019

SF30 CONTINUATION OF BLOCK NARRATIVE

SUMMARY OF CHANGES PAGE 2 OF 23

Amendment A0001 to Solicitation Number HHSI02-19-R-0011 entitled "Roadwork Construction of the

County Road 31 (CR-31), Left Turn Lane in Yolo County, California" is hereby amended to address the following:

1. Provide updated wage rates (CA190009, dated 02/01/2019) (Attachment J01, 21 pages).

2. Respond to RFQ inquiries received in addressing the solicitation package. The inquiries received are presented and answered as follows:

INQUIRY 0001:

Has a date been determined for a site visit? I read it was TBD.

RESPONSE PROVIDED:

As stated in Block 10 of the SF1442 and in Clause L.10, there is not a site visit scheduled or planned.

INQUIRY 0002:

Will a staging area be provided for storage of material and equipment? While visiting the site it appeared we could store to the right of the building project but wanted to verify.

Staging area(s) will be discussed and arranged during the pre-construction meeting.

INQUIRY 0003:

Is there an Indian Owned Set Aside and/or Preference?

The evaluation factors are provided for in Section L and M.

The PROPOSAL DUE DATE remains unchanged: Offers are due by 12:00 pm local time on April 2, 2019, unless changed by an amendment to this solicitation. NOTICE TO OFFERORS: Offerors must acknowledge receipt of any and all amendments by number and date on their offer (Block 19 of the

SF1442). All other terms and conditions remain unchanged.

END OF SUMMARY OF CHANGES

Attachment J01. Wage Determination: General Decision Number: CA190009 Dated 02/01/2019 Solicitation HHSI02-19-R-0011 Amendment A0001

General Decision Number: CA190009 02/01/2019 CA9

Superseded General Decision Number: CA20180013

State: California

Construction Type: Residential

Counties: Fresno, Kern, Madera, Merced, San Joaquin, Stanislaus and Tulare Counties in

California.

RESIDENTIAL CONSTRUCTION PROJECTS (consisting of single family homes and apartments up to and including 4 stories)

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.60 for calendar year

2019 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2019. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually.

Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29

CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/04/2019

1 02/01/2019

ELEC0100-004 03/01/2018

FRESNO, MADERA AND TULARE COUNTIES:

Rates Fringes

Electricians:

One and two-stories.........$ 20.25 1.01

Three and Four-stories......$ 37.50 22.18

* ELEC0428-002 12/01/2018

KERN COUNTY

ELECTRICIAN

China Lake Naval Weapons

Center, Edwards AFB.........$ 48.55 3%+19.29

Remainder of Kern County....$ 42.30 3%+19.39

ELEC0595-005 06/01/2018

SAN JOAQUIN COUNTY

ELECTRICIAN......................$ 37.00 7.45%+24.58

ELEC0684-003 12/01/2016

MERCED AND STANISLAUS COUNTIES:

Electricians:

(1) Three stories and under.$ 19.50 6.5%+13.30

(2) Four Stories............$ 36.40 3%+20.73

ENGI0003-007 06/26/2017

"AREA 1" WAGE RATES ARE LISTED BELOW

"AREA 2" RECEIVES AN ADDITIONAL $2.00 PER HOUR ABOVE AREA 1

RATES.

SEE AREA DESCRIPTIONS BELOW

OPERATOR: Power Equipment

(AREA 1:)

GROUP 1.....................$ 43.25 30.39

GROUP 2.....................$ 41.80 30.39

GROUP 3.....................$ 40.40 30.39

GROUP 4.....................$ 39.07 30.39

GROUP 5.....................$ 37.86 30.39

GROUP 6.....................$ 36.59 30.39

GROUP 7.....................$ 35.50 30.39

GROUP 8.....................$ 34.00 30.39

GROUP 8-A...................$ 32.30 30.39

OPERATOR: Power Equipment

(Cranes and Attachments -

AREA 1:)

GROUP 1

Cranes.....................$ 44.85 30.39

Oiler......................$ 35.59 30.39

Truck crane oiler..........$ 38.05 30.39

GROUP 2

Cranes.....................$ 42.41 30.39

Oiler......................$ 35.34 30.39

Truck crane oiler..........$ 37.83 30.39

GROUP 3

Cranes.....................$ 40.77 30.39

Hydraulic..................$ 37.20 30.39

Oiler......................$ 35.11 30.39

Truck crane oiler..........$ 37.58 30.39

GROUP 4

Cranes.....................$ 37.86 30.39

FOOTNOTE: Work suspended by ropes or cables, or work on a Yo-Yo

Cat: $.60 per hour additional.

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP 1: Operator of helicopter (when used in erection work);

Hydraulic excavator, 7 cu. yds. and over; Power shovels, over 7

cu. yds.

GROUP 2: Highline cableway; Hydraulic excavator, 3-1/2 cu. yds.

up to 7 cu. yds.; Licensed construction work boat operator, on site; Power blade operator (finish); Power shovels, over 1 cu.

yd. up to and including 7 cu. yds. m.r.c.

GROUP 3: Asphalt milling machine; Cable backhoe; Combination backhoe and loader over 3/4 cu. yds.; Continuous flight tie back machine assistant to engineer or mechanic; Crane mounted continuous flight tie back machine, tonnage to apply; Crane mounted drill attachment, tonnage to apply; Dozer, slope brd;

Gradall; Hydraulic excavator, up to 3 1/2 cu. yds.; Loader 4

cu. yds. and over; Long reach excavator; Multiple engine scraper (when used as push pull); Power shovels, up to and including 1 cu. yd.; Pre-stress wire wrapping machine; Side boom cat, 572 or larger; Track loader 4 cu. yds. and over;

Wheel excavator (up to and including 750 cu. yds. per hour)

GROUP 4: Asphalt plant engineer/box person; Chicago boom;

Combination backhoe and loader up to and including 3/4 cu. yd.;

Concrete batch plant (wet or dry); Dozer and/or push cat; Pull-type elevating loader; Gradesetter, grade checker (GPS, mechanical or otherwise); Grooving and grinding machine;

Heading shield operator; Heavy-duty drilling equipment, Hughes, LDH, Watson 3000 or similar; Heavy-duty repairperson and/or welder; Lime spreader; Loader under 4 cu. yds.; Lubrication and service engineer (mobile and grease rack); Mechanical finishers or spreader machine (asphalt, Barber-Greene and similar);

Miller Formless M-9000 slope paver or similar; Portable crushing and screening plants; Power blade support; Roller operator, asphalt; Rubber-tired scraper, self-loading

(paddle-wheels, etc.); Rubber- tired earthmoving equipment

(scrapers); Slip form paver (concrete); Small tractor with drag; Soil stabilizer (P & H or equal); Spider plow and spider puller; Tubex pile rig; Unlicensed constuction work boat operator, on site; Timber skidder; Track loader up to 4 yds.;

Tractor-drawn scraper; Tractor, compressor drill combination;

Welder; Woods-Mixer (and other similar Pugmill equipment)

GROUP 5: Cast-in-place pipe laying machine; Combination slusher and motor operator; Concrete conveyor or concrete pump, truck or equipment mounted; Concrete conveyor, building site;

Concrete pump or pumpcrete gun; Drilling equipment, Watson

2000, Texoma 700 or similar; Drilling and boring machinery, horizontal (not to apply to waterliners, wagon drills or jackhammers); Concrete mixer/all; Person and/or material hoist;

Mechanical finishers (concrete) (Clary, Johnson, Bidwell Bridge

Deck or similar types); Mechanical burm, curb and/or curb and gutter machine, concrete or asphalt); Mine or shaft hoist;

Portable crusher; Power jumbo operator (setting slip-forms, etc., in tunnels); Screed (automatic or manual); Self-propelled compactor with dozer; Tractor with boom D6 or smaller;

Trenching machine, maximum digging capacity over 5 ft. depth;

Vermeer T-600B rock cutter or similar

GROUP 6: Armor-Coater (or similar); Ballast jack tamper; Boom-type backfilling machine; Assistant plant engineer; Bridge and/or gantry crane; Chemical grouting machine, truck-mounted;

Chip spreading machine operator; Concrete saw (self-propelled unit on streets, highways, airports and canals); Deck engineer;

Drilling equipment Texoma 600, Hughes 200 Series or similar up to and including 30 ft. m.r.c.; Drill doctor; Helicopter radio operator; Hydro-hammer or similar; Line master; Skidsteer loader, Bobcat larger than 743 series or similar (with attachments); Locomotive; Lull hi-lift or similar; Oiler, truck mounted equipment; Pavement breaker, truck-mounted, with compressor combination; Paving fabric installation and/or laying machine; Pipe bending machine (pipelines only); Pipe wrapping machine (tractor propelled and supported); Screed

(except asphaltic concrete paving); Self- propelled pipeline wrapping machine; Tractor; Self-loading chipper; Concrete barrier moving machine

GROUP 7: Ballast regulator; Boom truck or dual-purpose A-frame truck, non-rotating - under 15 tons; Cary lift or similar;

Combination slurry mixer and/or cleaner; Drilling equipment, 20

ft. and under m.r.c.; Firetender (hot plant); Grouting machine operator; Highline cableway signalperson; Stationary belt loader (Kolman or similar); Lift slab machine (Vagtborg and similar types); Maginnes internal full slab vibrator; Material hoist (1 drum); Mechanical trench shield; Pavement breaker with or without compressor combination); Pipe cleaning machine

(tractor propelled and supported); Post driver; Roller (except asphalt); Chip Seal; Self-propelled automatically applied concrete curing mahcine (on streets, highways, airports and canals); Self-propelled compactor (without dozer);

Signalperson; Slip-form pumps (lifting device for concrete forms); Tie spacer; Tower mobile; Trenching machine, maximum digging capacity up to and including 5 ft. depth; Truck- type loader

GROUP 8: Bit sharpener; Boiler tender; Box operator;

Brakeperson; Combination mixer and compressor

(shotcrete/gunite); Compressor operator; Deckhand; Fire tender;

Forklift (under 20 ft.); Generator; Gunite/shotcrete equipment operator; Hydraulic monitor; Ken seal machine (or similar);

Mixermobile; Oiler; Pump operator; Refrigeration plant;

Reservoir-debris tug (self- propelled floating); Ross Carrier

(construction site); Rotomist operator; Self-propelled tape machine; Shuttlecar; Self-propelled power sweeper operator

(includes vacuum sweeper); Slusher operator; Surface heater;

Switchperson; Tar pot firetender; Tugger hoist, single drum;

Vacuum cooling plant; Welding machine (powered other than by electricity)

GROUP 8-A: Elevator operator; Skidsteer loader-Bobcat 743 series or smaller, and similar (without attachments); Mini excavator under 25 H.P. (backhoe-trencher); Tub grinder wood chipper

ALL CRANES AND ATTACHMENTS

GROUP 1: Clamshell and dragline over 7 cu. yds.; Crane, over

100 tons; Derrick, over 100 tons; Derrick barge pedestal-mounted, over 100 tons; Self-propelled boom-type lifting device, over 100 tons

GROUP 2: Clamshell and dragline over 1 cu. yd. up to and including 7 cu. yds.; Crane, over 45 tons up to and including

100 tons; Derrick barge, 100 tons and under; Self-propelled boom-type lifting device, over 45 tons; Tower crane

GROUP 3: Clamshell and dragline up to and including 1 cu. yd.;

Cranes 45 tons and under; Self-propelled boom-type lifting device 45 tons and under;

GROUP 4: Boom Truck or dual purpose A-frame truck, non-rotating over 15 tons; Truck-mounted rotating telescopic boom type lifting device, Manitex or similar (boom truck) over 15 tons;

Truck-mounted rotating telescopic boom type lifting device, Manitex or similar (boom truck) - under 15 tons;

AREA DESCRIPTIONS:

POWER EQUIPMENT OPERATORS, CRANES AND ATTACHMENTS,TUNNEL AND

UNDERGROUND [These areas do not apply to Piledrivers and Steel

Erectors]

AREA 1: ALAMEDA, BUTTE, CONTRA COSTA, KINGS, MARIN, MERCED,

NAPA, SACRAMENTO, SAN BENITO, SAN FRANCISCO, SAN JOAQUIN, SAN

MATEO, SANTA CLARA, SANTA CRUZ, SOLANO, STANISLAUS, SUTTER,

YOLO, AND YUBA COUNTIES

AREA 2 - MODOC COUNTY

THE REMAINING COUNTIES ARE SPLIT BETWEEN AREA 1 AND AREA 2 AS

NOTED BELOW:

ALPINE COUNTY:

Area 1: Northernmost part

Area 2: Remainder

CALAVERAS COUNTY:

Area 1: Except Eastern part

Area 2: Eastern part

COLUSA COUNTY:

Area 1: Eastern part

DEL NORTE COUNTY:

Area 1: Extreme Southwestern corner

ELDORADO COUNTY:

Area 1: North Central part

FRESNO COUNTY

GLENN COUNTY:

HUMBOLDT COUNTY:

Area 1: Except Eastern and Southwestern parts

LAKE COUNTY:

Area 1: Southern part

LASSEN COUNTY:

Area 1: Western part along the Southern portion of border with

Shasta County

MADERA COUNTY

Area 1: Remainder

MARIPOSA COUNTY

MENDOCINO COUNTY:

Area 1: Central and Southeastern parts

MONTEREY COUNTY

Area 2: Southwestern part

NEVADA COUNTY:

Area 1: All but the Northern portion along the border of Sierra

County

PLACER COUNTY:

Area 1: All but the Central portion

PLUMAS COUNTY:

Area 1: Western portion

SHASTA COUNTY:

Area 1: All but the Northeastern corner

SIERRA COUNTY:

Area 1: Western part

SISKIYOU COUNTY:

Area 1: Central part

SONOMA COUNTY:

Area 1: All but the Northwestern corner

Area 2: Reaminder

TEHAMA COUNTY:

Area 1: All but the Western border with mendocino & Trinity

Counties

TRINITY COUNTY:

Area 1: East Central part and the Northeaster border with

TULARE COUNTY;

TUOLUMNE COUNTY:

Area 2: Eastern Part

ENGI0003-019 07/26/2017

SEE AREA DESCRIPTIONS BELOW

(LANDSCAPE WORK ONLY)

GROUP 1

AREA 1.....................$ 34.05 28.73

AREA 2.....................$ 36.05 28.73

GROUP 2

AREA 1.....................$ 30.45 28.73

AREA 2.....................$ 32.45 28.73

GROUP 3

AREA 1.....................$ 25.84 28.73

AREA 2.....................$ 27.84 28.73

GROUP DESCRIPTIONS:

GROUP 1: Landscape Finish Grade Operator: All finish grade work regardless of equipment used, and all equipment with a rating more than 65 HP.

GROUP 2: Landscape Operator up to 65 HP: All equipment with a manufacturer's rating of 65 HP or less except equipment covered by Group 1 or Group 3. The following equipment shall be included except when used for finish work as long as manufacturer's rating is 65 HP or less: A-Frame and

Winch Truck, Backhoe, Forklift, Hydragraphic Seeder

Machine, Roller, Rubber-Tired and Track Earthmoving

Equipment, Skiploader, Straw Blowers, and Trencher 31 HP up to 65 HP.

GROUP 3: Landscae Utility Operator: Small Rubber-Tired

Tractor, Trencher Under 31 HP.

AREA DESCRIPTIONS:

AREA 1: ALAMEDA, BUTTE, CONTRA COSTA, KINGS, MARIN, MERCED,

NAPA, SACRAMENTO, SAN BENITO, SAN FRANCISCO, SAN JOAQUIN,

SAN MATEO, SANTA CLARA, SANTA CRUZ, SOLANO, STANISLAUS,

SUTTER, YOLO, AND YUBA COUNTIES

AREA 2 - MODOC COUNTY

THE REMAINING COUNTIES ARE SPLIT BETWEEN AREA 1 AND AREA 2 AS

NOTED BELOW:

ALPINE COUNTY:

Area 1: Northernmost part

CALAVERAS COUNTY:

COLUSA COUNTY:

DEL NORTE COUNTY:

Area 1: Extreme Southwestern corner

ELDORADO COUNTY:

Area 1: North Central part

FRESNO COUNTY

GLENN COUNTY:

HUMBOLDT COUNTY:

Area 1: Except Eastern and Southwestern parts

LAKE COUNTY:

Area 1: Southern part

LASSEN COUNTY:

Area 1: Western part along the Southern portion of border with Shasta County

MADERA COUNTY

MARIPOSA COUNTY

MENDOCINO COUNTY:

Area 1: Central and Southeastern parts

MONTEREY COUNTY

Area 2: Southwestern part

NEVADA COUNTY:

Area 1: All but the Northern portion along the border of

Sierra County

PLACER COUNTY:

Area 1: All but the Central portion

PLUMAS COUNTY:

Area 1: Western portion

SHASTA COUNTY:

Area 1: All but the Northeastern corner

SIERRA COUNTY:

Area 1: Western part

SISKIYOU COUNTY:

Area 1: Central part

SONOMA COUNTY:

Area 1: All but the Northwestern corner

Area 2: Reaminder

TEHAMA COUNTY:

Area 1: All but the Western border with mendocino & Trinity

Counties

TRINITY COUNTY:

Area 1: East Central part and the Northeaster border with

TULARE COUNTY;

TUOLUMNE COUNTY:

Area 2: Eastern Part

ENGI0012-009 07/01/2018

SITE WORK ONLY

(Cranes, Piledriving &

Hoisting Equipment)

GROUP 1.....................$ 46.65 25.25

GROUP 10....................$ 49.65 25.25

GROUP 11....................$ 50.65 25.25

GROUP 12....................$ 51.65 25.25

GROUP 13....................$ 52.65 25.25

GROUP 2.....................$ 47.43 25.25

GROUP 3.....................$ 47.72 25.25

GROUP 4.....................$ 47.86 25.25

GROUP 5.....................$ 48.08 25.25

GROUP 6.....................$ 48.19 25.25

GROUP 7.....................$ 48.31 25.25

GROUP 8.....................$ 48.48 25.25

GROUP 9.....................$ 48.65 25.25

OPERATOR: Power Equipment

GROUP 1....................$ 45.30 25.25

GROUP 2....................$ 46.08 25.25

GROUP 3....................$ 46.37 25.25

GROUP 4....................$ 47.86 25.25

GROUP 5....................$ 48.96 25.25

GROUP 6....................$ 48.08 25.25

GROUP 7....................$ 49.18 25.25

GROUP 8....................$ 48.19 25.25

GROUP 9....................$ 49.29 25.25

GROUP 10....................$ 48.31 25.25

GROUP 11....................$ 49.41 25.25

GROUP 12....................$ 48.48 25.25

GROUP 13....................$ 48.58 25.25

GROUP 14....................$ 48.61 25.25

GROUP 15....................$ 48.69 25.25

GROUP 16....................$ 48.81 25.25

GROUP 17....................$ 48.98 25.25

GROUP 18....................$ 49.08 25.25

GROUP 19....................$ 49.19 25.25

GROUP 20....................$ 49.31 25.25

GROUP 21....................$ 49.48 25.25

GROUP 22....................$ 49.58 25.25

GROUP 23....................$ 49.69 25.25

GROUP 24....................$ 49.81 25.25

GROUP 25....................$ 49.98 25.25

PREMIUM PAY:

$3.75 per hour shall be paid on all Power Equipment Operator work on the followjng Military Bases: China Lake Naval

Reserve, Edwards AFB

Workers required to suit up and work in a hazardous material environment: $2.00 per hour additional. Combination mixer and compressor operator on gunite work shall be classified as a concrete mobile mixer operator.

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Bargeman; Brakeman; Compressor operator; Ditch

Witch, with seat or similar type equipment; Elevator operator-inside; Engineer Oiler; Forklift operator

(includes loed, lull or similar types under 5 tons;

Generator operator; Generator, pump or compressor plant operator; Pump operator; Signalman; Switchman

GROUP 2: Asphalt-rubber plant operator (nurse tank operator);

Concrete mixer operator-skip type; Conveyor operator;

Fireman; Forklift operator (includes loed, lull or similar types over 5 tons; Hydrostatic pump operator; oiler crusher

(asphalt or concrete plant); Petromat laydown machine; PJU side dum jack; Screening and conveyor machine oeprator (or similar types); Skiploader (wheel type up to 3/4 yd.

without attachment); Tar pot fireman; Temporary heating plant operator; Trenching machine oiler

GROUP 3: Asphalt-rubber blend operator; Bobcat or similar type (side steer); Equipment greaser (rack); Ford Ferguson

(with dragtype attachments); Helicopter radioman (ground);

Stationary pipe wrapping and cleaning machine operator

GROUP 4: Asphalt plant fireman; Backhoe operator (mini-max or similar type); Boring machine operator; Boxman or mixerman

(asphalt or concrete); Chip spreading machine operator;

Concrete cleaning decontamination machine operator;

Concrete Pump Operator (small portable); Drilling machine operator, small auger types (Texoma super economatic or similar types - Hughes 100 or 200 or similar types -drilling depth of 30' maximum); Equipment greaser (grease truck); Guard rail post driver operator; Highline cableway signalman; Hydra-hammer-aero stomper; Micro Tunneling

(above ground tunnel); Power concrete curing machine operator; Power concrete saw operator; Power-driven jumbo form setter operator; Power sweeper operator; Rock Wheel

Saw/Trencher; Roller operator (compacting); Screed operator

(asphalt or concrete); Trenching machine operator (up to 6 ft.); Vacuum or much truck

GROUP 5: Equipment Greaser (Grease Truck/Multi Shift).

GROUP 6: Articulating material hauler; Asphalt plant engineer; Batch plant operator; Bit sharpener; Concrete joint machine operator (canal and similar type); Concrete planer operator; Dandy digger; Deck engine operator;

Derrickman (oilfield type); Drilling machine operator, bucket or auger types (Calweld 100 bucket or similar types

- Watson 1000 auger or similar types - Texoma 330, 500 or

600 auger or similar types - drilling depth of 45' maximum); Drilling machine operator (including water wells); Hydrographic seeder machine operator (straw, pulp or seed), Jackson track maintainer, or similar type;

Kalamazoo Switch tamper, or similar type; Machine tool operator; Maginnis internal full slab vibrator, Mechanical berm, curb or gutter(concrete or asphalt); Mechanical finisher operator (concrete, Clary-Johnson-Bidwell or similar); Micro tunnel system (below ground); Pavement breaker operator (truck mounted); Road oil mixing machine operator; Roller operator (asphalt or finish), rubber-tired earth moving equipment (single engine, up to and including

25 yds. struck); Self-propelled tar pipelining machine operator; Skiploader operator (crawler and wheel type, over

3/4 yd. and up to and including 1-1/2 yds.); Slip form pump operator (power driven hydraulic lifting device for concrete forms); Tractor operator-bulldozer, tamper-scraper

(single engine, up to 100 h.p. flywheel and similar types, up to and including D-5 and similar types); Tugger hoist operator (1 drum); Ultra high pressure waterjet cutting tool system operator; Vacuum blasting machine operator

GROUP 7: Welder - General

GROUP 8: Asphalt or concrete spreading operator (tamping or finishing); Asphalt paving machine operator (Barber Greene or similar type); Asphalt-rubber distribution operator;

Backhoe operator (up to and including 3/4 yd.), small ford, Case or similar; Cast-in-place pipe laying machine operator; Combination mixer and compressor operator (gunite work); Compactor operator (self-propelled); Concrete mixer operator (paving); Crushing plant operator; Drill Doctor;

Drilling machine operator, Bucket or auger types (Calweld

150 bucket or similar types - Watson 1500, 2000 2500 auger or similar types - Texoma 700, 800 auger or similar types -drilling depth of 60' maximum); Elevating grader operator;

Grade checker; Gradall operator; Grouting machine operator;

Heavy-duty repairman; Heavy equipment robotics operator;

Kalamazoo balliste regulator or similar type; Kolman belt loader and similar type; Le Tourneau blob compactor or similar type; Loader operator (Athey, Euclid, Sierra and similar types); Mobark Chipper or similar; Ozzie padder or similar types; P.C. slot saw; Pneumatic concrete placing machine operator (Hackley-Presswell or similar type);

Pumpcrete gun operator; Rock Drill or similar types; Rotary drill operator (excluding caisson type); Rubber-tired earth-moving equipment operator (single engine, caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. up to and including 50 cu.

yds. struck); Rubber-tired earth-moving equipment operator

(multiple engine up to and including 25 yds. struck);

Rubber-tired scraper operator (self-loading paddle wheel type-John Deere, 1040 and similar single unit); Self-propelled curb and gutter machine operator; Shuttle buggy;

Skiploader operator (crawler and wheel type over 1-1/2 yds.

up to and including 6-1/2 yds.); Soil remediation plant operator; Surface heaters and planer operator; Tractor compressor drill combination operator; Tractor operator

(any type larger than D-5 - 100 flywheel h.p. and over, or similar-bulldozer, tamper, scraper and push tractor single engine); Tractor operator (boom attachments), Traveling pipe wrapping, cleaning and bendng machine operator;

Trenching machine operator (over 6 ft. depth capacity, manufacturer's rating); trenching Machine with Road Miner attachment (over 6 ft depth capacity): Ultra high pressure waterjet cutting tool system mechanic; Water pull

(compaction) operator

GROUP 9: Heavy Duty Repairman

GROUP 10: Drilling machine operator, Bucket or auger types

(Calweld 200 B bucket or similar types-Watson 3000 or 5000 auger or similar types-Texoma 900 auger or similar types-drilling depth of 105' maximum); Dual drum mixer, dynamic compactor LDC350 (or similar types); Monorail locomotive operator (diesel, gas or electric); Motor patrol-blade operator (single engine); Multiple engine tractor operator (Euclid and similar type-except Quad 9 cat.); Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Pneumatic pipe ramming tool and similar types; Prestressed wrapping machine operator;

Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Rubber tired earth moving equipment operator (multiple engine, Euclid, caterpillar and similar over 25 yds. and up to 50 yds. struck), Tower crane repairman; Tractor loader operator (crawler and wheel type over 6-1/2 yds.); Woods mixer operator (and similar

Pugmill equipment)

GROUP 11: Heavy Duty Repairman - Welder Combination, Welder -

Certified.

GROUP 12: Auto grader operator; Automatic slip form operator;

Drilling machine operator, bucket or auger types (Calweld, auger 200 CA or similar types - Watson, auger 6000 or similar types - Hughes Super Duty, auger 200 or similar types - drilling depth of 175' maximum); Hoe ram or similar with compressor; Mass excavator operator less tha 750 cu.

yards; Mechanical finishing machine operator; Mobile form traveler operator; Motor patrol operator (multi-engine);

Pipe mobile machine operator; Rubber-tired earth- moving equipment operator (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck); Rubber-tired self- loading scraper operator (paddle-wheel-auger type self-loading - two (2) or more units)

GROUP 13: Rubber-tired earth-moving equipment operator operating equipment with push-pull system (single engine, up to and including 25 yds. struck)

GROUP 14: Canal liner operator; Canal trimmer operator;

Remote- control earth-moving equipment operator (operating a second piece of equipment: $1.00 per hour additional);

Wheel excavator operator (over 750 cu. yds.)

GROUP 15: Rubber-tired earth-moving equipment operator, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine-up to and including 25 yds. struck)

GROUP 16: Rubber-tired earth-moving equipment operator, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system

(multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 17: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 50 cu. yds. struck);

Tandem tractor operator (operating crawler type tractors in tandem - Quad 9 and similar type)

GROUP 18: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -single engine, up to and including 25 yds. struck)

GROUP 19: Rotex concrete belt operator (or similar types);

Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds.and up to and including 50

cu. yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck)

GROUP 20: Rubber-tired earth-moving equipment operator, types in any combination, excluding compaction units -single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem

(scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 21: Rubber-tired earth-moving equipment operator, types in any combination, excluding compaction units -multiple engine, Euclid, Caterpillar and similar type, over

50 cu. yds. struck)

GROUP 22: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system

(single engine, up to and including 25 yds. struck)

GROUP 23: Rubber-tired earth-moving equipment operator, (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating with the tandem push-pull system (multiple engine, up to and including 25 yds. struck)

GROUP 24: Rubber-tired earth-moving equipment operator, (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds.

struck)

GROUP 25: Concrete pump operator-truck mounted; Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck)

LABO0073-006 06/25/2018

SITE WORK ONLY:

SAN JOAQUIN COUNTY

Laborers:

Construction Specialist

Group.......................$ 30.49 23.20

Group 1.....................$ 29.79 23.20

Group 2.....................$ 29.64 23.20

Group 3.....................$ 29.54 23.20

CONSTRUCTION SPECIALIST GROUP: Asphalt Raker/Ironer, Pressure Pipelayer

GROUP 1: Pipelayer(including grade checking in connection with pipelaying)

GROUP 2: Asphalt shovelers and guinea chaser (stakeman)

GROUP 3: General laborer (including concrete laborer) and

Flagman

LABO0294-007 06/25/2018

FRESNO, KERN, MADERA, AND TULARE COUNTIES

Group.......................$ 30.49 23.20

Group 1.....................$ 29.79 23.20

LABO0300-009 07/03/2017

LABORERS

(1) General laborer, Concrete Laborer, Flagman...$ 28.09 15.77

(1) General Laborer, Concrete Laborer, Flagman...$ 33.19 18.24

(2) Asphalt Shoveler, Guinea Chaser...............$ 28.64 15.77

(2) Asphalt Shoveler........$ 33.74 18.24

(4) Asphalt Raker/Ironer, Pipelayer...................$ 35.84 18.24

(4) Asphalt Raker...........$ 35.84 18.24

LABO1130-004 06/25/2018

MERCED AND STANISLAUS COUNTIES

Group.......................$ 30.49 23.20

Group 1.....................$ 29.79 23.20

PAIN0016-014 01/01/2018

MERCED, STANISLAUS & SAN JOAQUIN COUNTIES

Painters:

Brush.......................$ 32.91 19.26

FOOTNOTES:

SPRAY/SANDBLAST: $0.50 additional per hour.

EXOTIC MATERIALS: $1.00 additional per hour.

HIGH TIME: Over 50 ft above ground or water level $2.00 additional per hour. 100 to 180 ft above ground or water level $4.00 additional per hour. Over 180 ft above ground or water level $6.00 additional per hour.

PAIN0016-024 01/01/2013

MERCED COUNTY

SOFT FLOOR LAYER.................$ 44.87 17.98

PAIN0036-017 07/01/2018

KERN COUNTY:

PAINTER (Including Lead

Abatement)

(1) Repaint.................$ 24.40 14.82

(2) All other work..........$ 26.68 14.90

PAIN0294-001 01/01/2018

FRESNO, MADERA AND TULARE COUNTIES

SOFT FLOOR LAYER.................$ 31.49 20.48

PAIN0294-002 01/01/2018

FRESNO, MADERA AND TULARE COUNTIES

PAINTER..........................$ 28.78 18.11

PAIN1237-004 10/01/2018

SAN JOAQUIN AND STANISLAUS COUNTIUES:

SOFT FLOOR LAYER.................$ 36.81 21.51

PAIN1247-004 05/01/2018

SOFT FLOOR LAYER.................$ 33.85 14.56

PLAS0300-004 07/01/2017

FRESNO, MADERA, MERCED, SAN JOAQUIN, STANISLAUS AND TULARE

COUNTIES:

CEMENT MASON/CONCRETE FINISHER...$ 39.20 19.71

PLAS0500-004 07/01/2018

KERN COUNTY:

CEMENT MASON/CONCRETE FINISHER...$ 35.75 22.48

* PLUM0246-003 01/01/2019

FRESNO, MADERA & TULARE COUNTIES

PLUMBER/PIPEFITTER...............$ 40.15 32.64

PLUM0246-004 01/01/2017

FRESNO, MERCED & SAN JOAQUIN COUNIES

PLUMBER (PIPE TRADESMAN).........$ 13.00 10.74

PIPE TRADESMAN SCOPE OF WORK:

Installation of corrugated metal piping for drainage, as well as installation of corrugated metal piping for culverts in connection with storm sewers and drains; Grouting, dry packing and diapering of joints, holes or chases including paving over joints, in piping; Temporary piping for dirt work for building site preparation; Operating jack hammers, pavement breakers, chipping guns, concrete saws and spades to cut holes, chases and channels for piping systems;

Digging, grading, backfilling and ground preparation for all types of pipe to all points of the jobsite; Ground preparation including ground leveling, layout and planting of shrubbery, trees and ground cover, including watering, mowing, edging, pruning and fertilizing, the breaking of concrete, digging, backfilling and tamping for the preparation and completion of all work in connection with lawn sprinkler and landscaping; Loading, unloading and distributing materials at jobsite; Putting away materials in storage bins in jobsite secure storage area; Demolition of piping and fixtures for remodeling and additions;

Setting up and tearing down work benches, ladders and job shacks; Clean-up and sweeping of jobsite; Pipe wrapping and waterproofing where tar or similar material is applied for protection of buried piping; Flagman

* PLUM0442-002 01/01/2019

MERCED, SAN JOAQUIN, STANISLAUS

PLUMBER/PIPEFITTER...............$ 42.25 30.64

PLUM0460-001 07/01/2012

PLUMBER..........................$ 33.63 15.60

* ROOF0027-003 01/01/2019

FRESNO, KERN, MADERA AND TULARE COUNTIES

ROOFER...........................$ 28.21 14.21

ROOF0081-008 08/01/2018

MERCED, SAN JOAQUIN AND STANISLAUS COUNTIES:

ROOFER...........................$ 36.57 18.23

TEAM0094-002 07/01/2018

FRESNO, MADERA, MERCED, SAN JOAQUIN, STANISLAUS and TULARE

COUNTIES

Truck drivers:

(1) Flatbed Utility.........$ 31.68 28.41

(2) Water Truck (2000-7000 gallons)....................$ 31.98 28.41

(3) Water Truck over 7000 gallons.....................$ 32.28 28.41

TEAM0692-001 07/01/2018

Truck drivers:

3-Axle Truck, 2-Axle Water

Truck.......................$ 30.87 28.59

Pickup......................$ 30.74 28.59

SUCA2001-001 08/06/2001

Brick Tender.....................$ 11.00 .96

BRICKLAYER.......................$ 17.00 1.12

CARPENTER........................$ 21.24 7.20

Laborer, General.................$ 7.25

LATHER...........................$ 15.00

PLASTERER........................$ 17.50

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the

Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses

(29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate

(weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or

"UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the

Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the

Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator

(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator

U.S. Department of Labor

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative

Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION