Attachment_1_-_DD254.doc
DOC document 308 KB Posted
- Attached to
- Joint Command and Control (C2) Architecture Support Federal contract opportunity
- Solicitation number
- HC1047-14-R-4021
- Issued by
- Defense Information Systems Agency
About this file
DD254
View the file
Other files for this federal contract opportunity
Show all 20
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF DEFENSE
CONTRACT SECURITY CLASSIFICATION SPECIFICATION
(The requirements of the DoD Industrial Security Manual apply to all security aspects of this effort.)
1. CLEARANCE AND SAFEGUARDING
a. FACILITY CLEARANCE REQUIRED
Secret
b. LEVEL OF SAFEGUARDING REQUIRED
N/A
| 2. THIS SPECIFICATION IS FOR: (X and complete as applicable) |
| 3. THIS SPECIFICATION IS: (X and complete as applicable) |
a. PRIME CONTRACT NUMBER
FORMCHECKBOX
| a. ORIGINAL (Complete date in all cases) |
| DATE (YYYYMMDD) |
FORMCHECKBOX
b. SUBCONTRACT NUMBER
FORMCHECKBOX
b. REVISED (Supersedes all previous specs) Revision No.
DATE (YYYYMMDD)
FORMCHECKBOX
c. SOLICITATION OR OTHER NUMBER
HC1047-14-R-4021
DUE DATE (YYYYMMDD)
FORMCHECKBOX
| c. FINAL (Complete item 5 in all cases) |
| DATE (YYYYMMDD) |
4. IS THIS A FOLLOW-ON CONTRACT?
X
YES
NO.
If yes, complete the following:
Classified material received or generated under N66001-09-D-0115-0004 (Preceding Contract Number) is transferred to this follow-on contract.
5. IS THIS A FINAL DD FORM 254?
YES
X
NO.
If yes, complete the following:
In response to the contractor's request dated , retention of the classified material is authorized for the period of
6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)
| a. NAME, ADDRESS, AND ZIP CODE |
| b. CAGE CODE |
| c. COGNIZANT SECURITY OFFICE (Name, Address, and ZIP Code) |
7. SUBCONTRACTOR
| a. NAME, ADDRESS, AND ZIP CODE |
| b. CAGE CODE |
| c. COGNIZANT SECURITY OFFICE (Name, Address, and ZIP Code) |
8. ACTUAL PERFORMANCE
| a. LOCATION |
| b. CAGE CODE |
| c. COGNIZANT SECURITY OFFICE (Name, Address, and ZIP Code) |
9. GENERAL IDENTIFICATION OF THIS PROCUREMENT
This task order procures engineering support for the Joint Command and Control (JC2) Objective Architecture and Transition Architecture.
| 10. THIS CONTRACT WILL REQUIRE ACCESS TO: |
| YES |
| NO |
| 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: |
| YES |
| NO |
a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION
| X |
| a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER CONTRACTOR'S FACILITY OR A GOVERNMENT ACTIVITY |
| X |
b. RESTRICTED DATA
| X |
| b. RECEIVE CLASSIFIED DOCUMENTS ONLY |
X
c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION
| X |
| c. RECEIVE AND GENERATE CLASSIFIED MATERIAL |
X
d. FORMERLY RESTRICTED DATA
| X |
| d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE |
X
e. INTELLIGENCE INFORMATION:
| e. PERFORM SERVICES ONLY |
| X |
(1) Sensitive Compartmented Information (SCI)
| X |
| f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO RICO, U.S. POSSESSIONS AND TRUST TERRITORIES |
X
(2) Non-SCI X
| g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFOR-MATION CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER |
| X |
f. SPECIAL ACCESS INFORMATION
| X |
| h. REQUIRE A COMSEC ACCOUNT |
X
g. NATO INFORMATION
| X |
| i. HAVE TEMPEST REQUIREMENTS |
X
h. FOREIGN GOVERNMENT INFORMATION
| X |
| j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS |
| X |
i. LIMITED DISSEMINATION INFORMATION
| X |
| k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE |
X
| j. FOR OFFICIAL USE ONLYINFORMATION |
| X |
| l. OTHER (Specify)IT Level I IT-II access required |
| X |
k. OTHER (Specify)
| X |
DD Form 254, DEC 1999 (EF)
PREVIOUS EDITIONS ARE OBSOLETE
12. PUBLIC RELEASE. Any Information (Classified Or Unclassified) Pertaining To This Contract Shall Not Be Released For Public Dissemination Except As Provided By The Industrial Security Manual Or Unless It Has Been Approved For Public Release By Appropriate U.S. Government Authority. Proposed Public Releases Shall Be Submitted For Approval Prior To Release
FORMCHECKBOX
Direct
FORMCHECKBOX
Through (Specify):
Director, C2 Programs DISA, Procurement Directorate (DITCO-NCR) DISA PAO
6914 Cooper Ave Attn: Charlotte Hunter, Contracting Officer, PL62 6910 Cooper Ave
Ft. Meade, MD 20755-7090 6910 Cooper Ave., Ft. Meade, MD 20755-0549 Ft Meade, MD 20744-0549 Di to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs) * for review.
* In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.
13. SECURITY GUIDANCE. The security classification guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.
10e(2): The contractor will abide by DCID 6/6 (formerly 1/7), Security Controls on the Dissemination of Intelligence Information, 11 July 2001. Provided by COR after contract award..
Reference Block 10j: Contractor shall be provided with and will abide by DoD Regulation 5400.7, DoD Freedom of Information Act Program, and DoD 5200.01-M, Information Security Program. Guidance provided by COR after contract award..
Reference Item 11e: Engineering Services – Reference Block 11e: Contract is for engineering services. Classification and markings on the material to be furnished will provide the classification guidance necessary for performance of this contract.
11g: (a) Technical information on file at the Defense Technical Information Center will be made available to the contractor if the contractor requires such information. (b) The contractor must prepare and forward a DD Form 1540 to the COR/TM for authorization BEFORE the services may be requested.
11j: The contractor will comply with OPSEC requirements contained in the contract or provided by the COR after contract award.
11l: IT-II access required
14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract. (If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use item 13 if additional space is needed.)
OPSEC requirements apply. Guidance provided in block 13 as reference item 11j
X
YES
NO
15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office. (If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use item 13 if additional space is needed.)
FORMCHECKBOX
YES
FORMCHECKBOX
NO
16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.
| a. TYPED NAME OF CERTIFYING OFFICIAL |
| b. TITLE |
| c. TELEPHONE (Include Area Code) |
| d. ADDRESS (Include Zip Code) |
| 17. REQUIRED DISTRIBUTION |
| x |
| a. CONTRACTOR |
b. SUBCONTRACTOR
| x |
| c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR |
e. SIGNATURE
d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION
| x |
| e. ADMINISTRATIVE CONTRACTING OFFICER |
| x |
| f. OTHERS AS NECESSARY DISA Industrial Security (MPS6) |
DD Form 254 (BACK), DEC 1999
File details come from the government source that posted it. Updated .