Solicitation Amendment H9242126QE0210001 SF 30.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

Created On:

12 Mar 2026, 09:55 AM Eastern Daylight Time

SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Supplies or Services & Prices or Costs

Line Item 0003

The following Line Item modifications were made:

Information From To Amount +/- Estimated Quantity 4 5 +1

Option Line Item 1003

The following Line Item modifications were made:

Information From To Amount +/- Estimated Quantity 4 5 +1

Option Line Item 2003

The following Line Item modifications were made:

Information From To Amount +/- Estimated Quantity 4 5 +1

Option Line Item 3003

The following Line Item modifications were made:

Information From To Amount +/- Estimated Quantity 4 5 +1

Option Line Item 4003

The following Line Item modifications were made:

Information From To Amount +/- Estimated Quantity 4 5 +1

Instructions, Conditions, & Notices to Offerors or Quoters

Header Miscellaneous Text (Modified):

Instructions, Conditions, & Notices to Offerors or Quoters

ADDENDUM TO 52.212-1

INSTRUCTIONS TO OFFERORS

The following paragraphs of FAR 52.212-1 are changed as shown below:

Para (b)(10) - Delete in entirety Para (d), (e), (h) & (l) - Delete in their entirety Special Operations Forces Austere Medical Technician (SOFAMT) Training: Contractor shall provide a unit price in each CLIN mentioned IAW the Performance Work Statement (PWS) and provide the extended total price.

Service Contract Reporting: N/A Additional Information: This is an electronic solicitation release. No hard copies will be mailed.

Instructions to Offerors:

Questions Concerning Solicitation: All questions are to be submitted electronically using the attached Q&A by the following deadline: March 10th, 2026, at 16:00 EST, to allow a reasonable time for the Government to respond. Any questions asked not utilizing the provided Q&A sheet will not be answered. A modification to the solicitation will provide answers to all questions No Later than March 12th at 1500 EST. The main point of contact for questions is SSG Saisha Smith, Contract Specialist, saisha.a.smith.mil@socom.mil and SFC Jeffrey Modlin, Contracting Officer, at jeffery.s.modlin.mil@socom.mil Solicitation Closing Date/Time: Quotes should be submitted electronically NO LATER THAN March 16th, 2026, at 1200 EST via email to SSG Saisha Smith, Contract Specialist, saisha.a.smith.mil@socom.mil and SFC Jeffrey Modlin, Contracting Officer, at jeffery.s.modlin.mil@socom.mil

A. QUOTE FORMAT

All submitted documents should be in Microsoft Excel (unprotected), and/or Microsoft Word format and the total submission shall not exceed 15 pages. Printing shall be easily readable (12 point font or larger with proportional spacing). The quotes shall consist of the following:

TAB A: Technical Capability TAB B: Price (SF1449)

B. QUOTE CONTENT

Technical Capability: must include the Contractor's technical submission. The Technical Capability submission shall be prepared using Microsoft Word format and should not include any price information. The Technical Capability should include the following:

(1) The Contractor shall clearly demonstrate its technical approach to meeting all PWS requirements to include a detailed narrative which clearly illustrates how they will provide sufficient and qualified personnel, equipment, supplies, tools, and materials necessary to meet the requirements of the Performance Work Statement.

(2) Price Submission: The Contractor's quote shall include pricing on all Contract Line Item Numbers (CLINs) that require pricing. The Contractor shall submit a completed CLIN Structure which includes a price for each CLIN, a total price for each contract period, and a total price for all CLINs

H9242126QE0210001

(3) Signed SF1449 with all pricing completed

(4) Acknowledgement of Solicitation Amendments: The Contractor shall submit a statement acknowledging receipt of any amendments to this solicitation.

(5) Offers shall be good for at least 60 days after submittal

(6) All Resumes IAW the PWS FAILURE TO PROVIDE THE ABOVE DOCUMENTS OR INFORMATION MAY EXCLUDE THE OFFEROR FROM CONSDERATION (End of Addendum)

ADDENDUM TO 52.212-4

1. Add paragraph (c)(1) as follows:

(c)(1) Contract Administration Data. The Contracting Officer is responsible for the administration of this contract and, alone, is authorized to take actions on behalf of the Government that result in changes in the terms of the contract. The Contracting Officer is SFC Jeffrey Modlin, jeffery.s. modlin.mil@socom.mil and the Contract Specialist is SFC Alan Farr, alan.farr.mil@socom.mil Changes to the Contracting Officer or Contract Specialist may be made by written correspondence from the contracting office in lieu of a modification to the contract.

2. Replace paragraph (g)(1) with the following:

(g) Invoice

3. WIDE AREA WORK FLOW (WAWF): The contractor shall invoice in accordance with the instructions at DFARS clause 252.232-7006 Wide Area Work Flow

4. Paragraphs (h), (j) are deleted in their entirety.

5. Add paragraph (q)(1) and (q)(2) with the following:

(q)(1) Insurance Requirements. The following kinds and minimum amounts of insurance are required in accordance with FAR clause 52.228-5 entitled, "Insurance--Work on a Government Installation."

KIND: AMOUNT:

Workmen's Compensation and Amount required by the State in which this contract is performed Occupational Disease Insurance Employer's Liability Insurance - $100,000 Comprehensive General Liability - $500,000 per occurrence Insurance for Bodily Injury Comprehensive Automobile Liability - $200,000 per person $500,000 per occurrence for Bodily Injury and $20,000 per occurrence for Property Damage NOTE: Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained.

The Contractor shall provide proof of insurance before commencing work under this contract. Note: Certificate of Insurance shall reference the contract number.

(q)(2) Post-Award Conference.

(a) Prior to the Contractor starting work, a post award conference (as described in FAR Subpart 42.5), will be convened by the 905th Contraction Battalion - Fort Liberty, North Carolina. The Contractor's Project Manager shall attend the conference. If the contract involves subcontractors, a representative of each major subcontractor shall also attend.

(b) The Contracting Officer and the Contractor will agree to the date, time and location of the conference after contract award. In the event of a conflict in schedules, the Contracting Officer will establish the date for the conference.

(End of Addendum)

Evaluation Factors for Award

Header Miscellaneous Text (Modified):

Evaluation Factors for Award

ADDENDUM TO FAR 52.212-2

EVALUATION OF COMMERCIAL PRODUCTS & COMMERCIAL SERVICES

(a) Basis for Award - The Government will award a contract based on the Best Value of the offeror proposal that meet, or exceed, the acceptable standards of the non-price factors identified in the solicitation.

1.0 BASIS FOR AWARD - Best Value

1.1 A Best Value approach will be used; the evaluation criteria are described herein. The Government will award a contract resulting from this solicitation to a responsible Contractor whose quote conforms to the solicitation and will be the most advantageous to the Government.

1.2 The Government's technical evaluation team will evaluate the quote to determine if it is either Technically Acceptable or Technically Unacceptable (price excluded). In order to be considered Technically Acceptable, the quote for each factor must be determined Acceptable and must demonstrate an understanding of the requirement that meets the needs of the solicitation and PWS. Failure to meet the criteria outlined in the PWS will render the quote technically unacceptable and will not be considered for award.

1.3 The Government will evaluate the quote strictly in accordance with this solicitation and will not assume that performance will include areas not specified in the Contractor's submission.

1.4 The Government intends to award the contract without discussions. Therefore, the quote should contain the contractor's best term from Technical Capability and Price Reasonableness standpoint. Additional oral or written information from the contractor may be requested. The Government reserves the right to conduct discussions. Ifa revised quote is requested, it will be evaluated against the same criteria as was the initial quote.

1.5 Evaluation Criteria: The Government will use the criteria set forth below to evaluate and select the awardee. Evaluation criteria consist of three (3) evaluation factors. The quote will be evaluated under the following evaluation factors:

Factor 1: Technical Acceptability Factor 2: Price Factor 3: Past Performance

-Assigning Ratings: The Technically Acceptable factors will be assigned one of the ratings below:

Table A-1. Technical Acceptable/Unacceptable Ratings

RATING DESCRIPTION

Acceptable Quote clearly meets the minimum requirements Unacceptable Quote does not clearly meet the minimum requirements

FACTOR 1: TECHNICAL ACCEPTABILITY: To be determined Technically Acceptable, the contractor's quote must demonstrate the technical approach to meeting all PWS requirements to include a detailed narrative which clearly illustrates how they will provide sufficient and qualified personnel, equipment, supplies, tools, any materials necessary to meet the requirement of the Performance Work Statement.

FACTOR 2: PRICE: The contractor submitted complete pricing for all required sections and line items as instructed and explained in the Instructions to Offerors.

a. As part of price evaluation, the Government will evaluate its option to extend services (see FAR 52.217-8) by adding six (6) months to the Contractor's total price. Contractor is required only to price the base, and four 1-year option periods. Contractor shall not submit a price for the potential six (6) month extension of services period. The Government may choose to exercise the Extension of Services at the end of the option period, utilizing the same rates as the last six months of the last option period.

b. Options: The Government will evaluate offers for award purposes by adding the total price for all options including the total price for the base requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

c. Note: Trade-offs between price and non-price factors are not permitted. Unreasonably high, unbalanced, inaccurate or incomplete price proposals may be the grounds for eliminating a proposal from competition. The Government will evaluate proposed prices for reasonableness IAW the instructions above.

d. If the contracting officer determines that the lack of balanced pricing poses an unacceptable risk to the Government, the contracting officer may reject the offeror's proposal. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more-line items is significantly over or understated.

FACTOR 3: PAST PERFORMANCE: Past Performance shall consist of the following:

a. Relevance: How closely past performance contracts align with the current solicitation requirements.

b. Recency: The timeframe of past performance, with a focus on contracts completed within the last 3 years.

c. Quality of performance: This includes assessments of the contractor's ability to meet deadlines, adhere to specifications, and maintain quality standards.

(End of Addendum)

905TH CBN, X4047 NEW DAWN DR

FORT LIBERTY, NC 28310

UNITED STATES

Saisha SMITH, Email: saisha.a.smith.mil@socom.mil Telephone: 910-908-9456 AdminBy:

SCD: PAS:

CODate: 12 MAR 2026