Attachment 1- Product Description_13Jun24.pdf

Product Description Manufacturing of AR500 Ballistic Steel Target for Ranges

1. BACKGROUND

1.1 Steel targets are required to support of NSWC Ranges located throughout the United States.

2. OBJECTIVES

2.1 Naval Special Warfare Command intends to issue a firm-fixed price Indefinite Delivery

Indefinite Quantity (IDIQ) contract for acquisition of steel targets and associated support items for ranges at Little Creek/Fort Story, Camp Atterbury, Fort PickettBarfoot, Fort A.P.

HillWalker, Fort Chaffee, Stennis, MS, Coronado, CA, Hunter Liggett, CA, Hawaii, and other locations as specified at the delivery order level.

3. SCOPE

3.1 The Contractor shall provide the personnel, management, and materials necessary to manufacture, develop and ship steel targets and associated support items. NSWC requires a minimum of 60 different types, styles, and thicknesses of targets made of ballistic steel to support Land Warfare, SNIPER Training, and Unit Level Training. These targets require various support items fabricated of mild steel to mount, hang, or to stand up in various types of terrain. The targets are also intended to be mobile enough to be relocated by ATV’s and handled by Range Technicians when they are transported, used, and stored.

4. REQUIREMENTS

4.1 The Contractor shall manufacture the following types of Abrasion Resistant 500 (AR500) Steel Targets (3/8” or ½” thick) as specified in the details below in the Attachment 1 Product Description and Attachment 2 Concept Specifications:

4.1.1 Ballistic Steel Target (A001-A029)

4.1.1.1 All Silhouettes (A001- A003 / A005-A009) shall have a welded mount on the back that mounts/fits to standard 2”x4” lumber.2X4’s.

4.1.1.2 The top of the silhouettes shall, when mounted, be tilted 20 degrees towards the ground to dissipate most of the bullet frag towards the ground. Tilt shall not be more than 20 degrees. See Attachment 3, page 5.

4.1.1.3 All hanging circles(A014-A017) shall have ½” holes cut to accommodate 2-1/4” 3/8-16 carriage bolts.

4.1.1.4 Targets (A018, A020, A024, A025, A028, A029) will have the option for ½” holes cut in the shoulders or corners 1” from the top and side to accommodate 2-1/4” 3/8-16 carriage bolts.

4.1.2 Steel Reactive and Knockdown Targets (A033-A044). The width of targets A033 shall be 18” and A034 shall be 9”18”. A036 T-Box, 4" hor-3" vert-1.5" wide / Head 5" /Target body, 12"Wx24"L / Head swinger plate, 5"Wx4"L / chest hole 4" / chest swing plate 4" circle. A037 Target body 12"Wx24"L, swing plate 4".

A039 4"-R / 8"W / R-6" / 9-3/8" and narrow back down to 8"W at bottom of target. A040 top R-1.5" / 3"W / mid R-3" / 4"W / and narrow back down to 3"W at the bottom of target. A041 R-2" / 4"W / mid R-4" / 5-3/8"W / narrow back down to 4"W at bottom of target. A042 180-degree swing / 6" plates. A043 is 48”Wx53”Lx58”H skid , the spinning target dims: 28”Wx43.5”L (E-type plate 1ea), 13-1/2”Wx43.5”L (half E-type plate 2ea), 5-1/2”xWx31”L (flat plate 4ea), top head radius is 9-1/2” with two 2” holes cut for target assembly and placement, center shaft 5” round stock, top cap with grease fitting, set on 3” round stock with top / bottom greaseable bearing, fragment trap: bottom plate dims 29-1/2”Wx29-1/2”L, side plate dims 7-3/4”Hx 36-1/2”W top 29-1/2” W at bottom. A044 is 24”Wx18-1/2”Lx28”H

4.1.24.1.3

4.1.2.1 Targets A038 A039 through A041 (ballistic steel knockdown targets with assembly) are spring loaded target systems. After being hit with a bullet, they shall fall with no spring tension, once they hit the base, they shall come back slowly and return backreturn to firing position. The base shall be manufactured using mild steel, hinges, and springs.

4.1.2.2 Targets A036 and A037 shall have a base stand and a vertical upright. The vertical upright for A036 shall be made of mild steel and the upright for A037 shall be made of wood.

4.1.3 Ballistic Steel Replicated Shooting Vehicle Targets (A045-A054). Contractor shall use materials that best support the weight of the target panels assembled to ensure durability. Contractor pre-assembly is not required. The Government will assemble these targets on-site. Contractor shall provide assembly instructions that provide clear and simplistic guidance. Contractor shall make contact with Delivery POC identified on each individual Delivery Order prior to shipping to discuss shipping plan (e.g. number and size of parcels, any special equipment, tools, or instructions to assemble, or anything else beneficial for the Government Delivery POC to know).

4.1.4 Quick Setup Target Stands (A055-A062). The target stands will be made of mild steel. A055 sliding adjustable width stand 32”Lx30-1/4” – 42-1/4”W with vertical tube brackets that support standard 2”x4” lumber. A056 79- 11/16”Wx1217/16”Lx98-5/8”H. A057 can be schedule 40, 3/4" black pipe, A058 adjustable width stand / A059 / A060 fixed width stand / A061 2”x2” x1/4” angle iron stake to support ¾” rebar poles / A062- all fabricated with 1/4" thickness, mild steel.

4.1.5 AR500 Ballistic Steel Plates (A063-A064) A063 48”wx96”Lx3/8” thick.

48”Wx96”Lx1/2” thick. Miscellaneous Parts: A065- A072 / A075-A076. Part A068 and front protection plate shall be made of Ar-500 ballistic steel. Targets A069, A070, A071, A072, A073, A074, and A075 shall be made of AR-500 ballistic steel. The 2”x2”x1/4” angle bracket frames, chains, brackets to accommodate standard 2”x4” lumber, black pipe, and swing arms on parts A065 through A076 shall be made of mild steel.

4.1.6 Portable bullet trap target (A077) The trap must be a 36"H x 24"H x 4"W and made with ½”. AR 500 ballistic steel with a slide-out bullet catch tray in the bottom made from AR-500 3/8” steel. Trap face will use ½” self-sealing black sheet rubber. Base will have (4) heavy duty 4” casters on each trap with two being lockable and two being stationary. Overall height will be 60”. The trap will have a data plate with manufacturers name, serial number, date of manufacture, and steel pedigree data attached to the back of the impact plate at the top. Trap will be modular in design where all trap parts are interchangeable for ease of transport and storage. Trap base and stand will be made of mild steel. See Attachment 2 for more detail. Entire trap and stand components will be painted flat/matte black

4.1.7 Provide a ballistic steel pedigree certificate that shows the contractor can provide AR500 ballistic steel (or better) targets. All steel hardness certifications shall be Brinell Hardness Number (BHN) rating of 500 or greater.

4.1.8 Frames shall be painted matte/flat black, and targets shall be painted matte/flat white to prevent corrosion. Both frames and targets will be painted in their entirety.

4.1.9 Other steel targets may be incorporated on a “to be negotiated” basis.

4.2 The contractor shall use plasma cutting or a water jet system or laser cutting machine to cut the targets.

4.3 The contractor shall conduct ballistic steel testing to ensure the metal is AR500 ballistic steel (or better) prior to manufacturing the targets. Non-destructive (NDT, Brinell Hardness testing), or chemical, or tensile, are acceptable testing criteria. Mill certification / Test Reports certifying AR-500 is also acceptable.

4.4 Contractor shall fulfill Delivery Orders no later than 90 calendar days after receipt of order.

5 CONTRACTOR TRAVEL

5.1 No contractor travel is anticipated under this contract.

6 SECURITY

6.1 N/A

7 GOVERNMENT FURNISHED PROPERTY/EQUIPMENT/INFORMATION (GFP/GFE/GFI)

7.1 N/A

8 QUALITY CONTROL

8.1 The Contractor shall implement and maintain a Quality Control Plan (QCP) to ensure work performed conforms to the scope of work and meets the requirements under this Product Description. The QCP shall, at a minimum provide a method for performing inspections;

identifying correct thicknesses of ballistic AR500 steel, correcting andcorrecting and preventing problems/defective service; addressing customer complaints, and improving the quality of services over the life of the contract.

9 QUALITY ASSURANCE

9.1 The Government reserves the right to perform inspections and surveillance to evaluate the Contractor’s compliance to the contract terms and performance of the requirements in the Product Description. The Government will make every effort to ensure that the surveillance methods used are conducted in an objective, fair, and consistent manner.

9.2 Contract Discrepancy Report (CDR). In the event of unsatisfactory contractor performance, the CO will issue a CDR that will explain the circumstances and findings concerning the incomplete or unsatisfactory service or product. The contractor shall acknowledge receipt of the CDR and respond in writing as to how he/she shall correct the unacceptable performance and avoid a recurrence. The Government will review the contractor's corrective action response to determine acceptability and will use any completed CDR as part of an overall evaluation of Contractor performance when determining present or future contractual actions.

10 DELIVERY ADDRESS

10.1 Deliveries are anticipated to be within the Continental United States (to include Hawaii and Alaska), but other OCONUS locations may be included on a to be negotiated basis.

The Government anticipates most deliveries to be made to San Diego, CA, Joint Expeditionary Base Fort Story, Virginia Beach, VA and Joint Expeditionary Base Little Creek. Other locations may include Bowling Green, VA; Edinburgh, IN; Blackstone, VA;

Stennis, MS; Coronado, CA; Hunter Liggett, CA; and Hawaii.

10.2 Delivery locations will be specified at the Delivery Order level.

11 PERIOD OF PERFORMANCE

11.1 Five-year ordering period from contract award