Att_3_-_Task_Order_2_-_Performance_Work_Statement.pdf

Performance Work Statement (PWS) Naval Special Warfare Command

Vehicles, Equipment and Watercraft Support Services (VEWSS)

TASK ORDER 0002

1.0 OBJECTIVES: Maintain NSWC’s fleet of support craft at a rate ≥ 90% availability; in accordance with this

PWS.

2.0 SCOPE: Maintenance and repair of Surface Support Craft (SSC) and related equipment. The attached SSC Inventory List provides an itemized list of anticipated craft and boat motors needing service or repair during the period of performance. The Contractor shall provide all management, personnel, and oversight to perform technical and mechanical support services at Government owned facilities.

3.0 REQUIREMENTS

3.1 SURFACE SUPPORT CRAFT (SSC)

3.1.1 GENERAL. The Contractor shall perform repair and maintenance to include, but not limited to, fiberglass hull repair, patching, welding, metal forming, metal forming, sheet metal work, minor body repair, fender repair, engine maintenance, and repair for both inboard and outboard motors. The Contractor shall service and repair jet and propeller dive systems and gearing. The Contractor shall perform complex electrical repair and troubleshooting for ignition, lighting, panel controls, accessories, and DC output points.

3.1.2 Boat Trailer Repair: The Contractor shall service and repair boat trailers in accordance with manufacturer specifications. This includes performing a full range of services for repairing brakes, axles, bearing, lighting, and tire replacement.

3.1.3 Tire Services: The Contractor shall be capable of demounting and mounting all sizes of tires and balancing the wheel and tire assembly once mounted. Tire repairs shall include plug insertion, patches, and complete replacement depending upon severity of damage.

3.1.4 SSC PERSONNEL AND QUALIFICATIONS. The Government anticipates the following labor mix will be required to perform the requirements of this PWS:

Position/Skill Set

Place of Performance

San Diego, CA

Virginia Beach, VA

Stennis Space Center, MS

Pearl City, HI

Dam Neck, VA

Agana, Guam

Fort Chaffee, AR

Lead Maritime Mechanic 2 2 - 1 1 - - Maritime Mechanic 2 1 - 1 3 1 -

3.1.4.1 Lead Maritime Mechanic: The Lead Maritime Mechanic shall service and repair the craft and trailers, including light surface craft, Jet Ski’s, and various models of inboard and outboard motors. The Lead Maritime Mechanics shall service, repair, test, and inspect trailers associated with transporting boats and watercraft. At times the Lead Maritime Mechanics shall accompany a craft operations team during testing, evaluation and troubleshooting of mechanical, electrical, steering systems, and onboard equipment. At times, the Lead Maritime Mechanic shall provide on-the-job training (OJT) instruction to entry level military and civilian mechanics to ensure that maintenance and repairs are properly addressed.

3.1.4.1.1 Lead Maritime Mechanic shall have a minimum of five (5) years’ experience as an Original Equipment Manufacturer (OEM) certified mechanic with either Evinrude, Honda, Mercury, Suzuki or Yamaha commercial, outboard engines and ancillary equipment.

3.1.4.1.2 Lead Maritime Mechanic shall have a minimum of one (1) year of experience in aluminum, and glass reinforced plastic (GRP) hull repair, the process and the procedures required to make minor and major repairs; to include advanced depot level.

3.1.4.1.3 Lead Maritime Mechanic shall have a minimum of five (5) years’ experience with troubleshooting and minor repairs of inboard marine diesel engines manufactured by Caterpillar, Detroit Diesel and Cummins.

3.1.4.2 Maritime Mechanics: The Maritime Mechanic shall service and repair the craft and trailers, including light surface craft, Jet Skis, and various models of inboard and outboard motors as assigned by the Lead Maritime Mechanic. The Maritime Mechanic shall provide on-the-job training (OJT) instruction to entry level military and civilian mechanics new to various types of propulsion and ancillary equipment.

3.1.4.2.1 The Maritime Mechanic shall have a minimum of three (3) years’ experience as an Original Equipment Manufacturer (OEM) certified mechanic with either Evinrude, Honda, Mercury, Suzuki or Yamaha commercial small outboard engines and ancillary equipment.

3.1.4.2.2 Experience with troubleshooting and minor repairs of inboard marine diesel engines manufactured by Caterpillar and Cummings, as well as Hamilton and Kamewa waterjets, is desired but not required.

3.2 MISCELLANEOUS

3.2.1 Hazardous Materials.

3.2.1.1 Contractor personnel shall properly handle hazardous materials and place in Government provided Hazmat storage and disposal containers in accordance with all applicable Government requirements and laws.

3.2.1.2 The Government is solely responsible for properly managing the safe disposal of all hazardous waste items (e.g., lubricants, fluids, oils, etc.) in the performance of this task order.

4.0 DELIVERABLES

4.1 MONTHLY STATUS REPORT. Monthly status report is to include at a minimum:

4.1.1 Labor Summary, to include:

4.1.1.1 Number of contractor employees staffed in each location.

4.1.1.2 Positions vacant during the month and status toward filling any vacancies. Contractor shall not invoice for work unperformed due to vacant positions.

4.1.1.3 Any pertinent information on employee transitions to include Common Access Card renewals and status of security clearance for facility access; changes in employee driver’s license status related to ability to drive government equipment or otherwise meet requirements of the PWS.

4.1.2 Travel Summary, to include the month’s travel expenditures and cumulative total for the period of performance.

Description Number PWS Ref. Delivery Date

MOTHLY STATUS

REPORT

0001 4.1 Within 3 Business Days after close of each month.

5.0 PLACE OF PERFORMANCE

5.1 Primary performance locations:

5.1.1 Virginia Beach, VA

5.1.2 Dam Neck, VA

5.1.3 San Diego, CA

5.1.4 Agana Guam

5.1.5 Pearl City, HI

5.2 Contractor may be authorized to travel to support performance at other sites, including but not limited to detachments at Kodiak, AK and Keyport, WA, when required.

6.0 CONTRACTOR TRAVEL: Upon prior approval by the COR, contractor travel is authorized for both east and west coast to include Hawaii. Contractor costs for Government authorized travel are included in this task order. All travel shall be in accordance with FAR 31.205-46 and applicable travel regulations (Joint, Federal or Standardized).

Contractor payment claims shall include applicable documentation to support actual costs incurred (e.g. airfare and hotel/lodging receipts) as well as any receipts valued at or above $75.00. Failure to provide appropriate documentation may result in loss of reimbursement of travel expenses.

7.0 SECURITY: Security will be in accordance with the attached DD254.

7.1.1 All Contractors shall be cleared at the “Secret” level at the start of the task.

8.0 APPLICABLE DOCUMENTS:

Document Web link (if applicable)

COMNAVSPECWARCOMINST 4790.2 Available upon request

Original Equipment Manufacturers (OEM) Manuals Available at work center

9.0 PERIOD OF PERFORMANCE: Task Order 2 shall have one (1) 12-month base year, with one (1) 12-month option period.

10.0 ATTACHMENTS:

10.1 SSC Inventory List