Attachment_02_Design_Characteristics_Matrix_160201.pdf

Attachment 02 Design Characteristics Matrix

1 February 2016

Design Characteristics

Description Vendor Response

Materials Lightweight, waterproof, windproof, breathable, durable, rip and tear resistant, comfortable, and as quiet as possible. Material must be Berry Amendment Compliant.

Weight Weight of MASS not to exceed 5-lbs and L- MASS not to exceed 4-lbs. Both weights apply to a size garment that would fit an individual who has the following measurements: Chest 46”, Waist 38”, Girth 74”, Inseam 34”, Height 74”, Sleeve 35”, Shoe Size 15.

Sizing The MASS and L-MASS shall, at minimum, accommodate the 5th to the 95th percentile male as follows: Chest 36-54”, Waist 30-44”, Girth 62-80”, Inseam 28-38”, Height 62-78”, Sleeve 30-36”, Sock Size 6-15. Offeror shall also confirm the ability to provide sizing for females.

Signature Management

The MASS and L-MASS shall be constructed with materials that minimize the wearer’s signature when viewed visually or through Visual Augmentation Sensors (VAS). At a minimum, face fabric shall be capable of being printed or dyed in a solid subdued color.

Durability Must be durable enough to perform in operational environments and be rip/tear resistant when used onboard marine surface craft, during OTB operations, maritime operations on sharp rocks and hardened terrain, during VBSS, Gas and Oil Platform (GOPlat) assaults, when in contact with Caving Ladders or Standard Ship materials and SOF Combat Equipment.

Collar Construction

The collar shall be comfortable, durable, adjustable, non-restrictive, and waterproof.

While in garrison, it must have the ability to relieve tension (on neck) for increased comfort and ventilation via neck ring/other means.

A field replaceable neck seal is desired.

Replaceable within 30 seconds after user has

1 February 2016 been trained on the replacement procedure.

A pre-measured/semi-customized neck seal (Small, Medium, Large) is desired to minimize the need to trim after delivery.

Neck ring retention system is desired.

Pocket Construction

Does not retain water and can be securely fastened shut with one hand.

Pocket Location

Easily accessible shoulder, thigh, and calf pockets.

Zipper(s) Construction

Lightweight, low profile, waterproof, easy to operate.

Zipper(s) Locations

Entry Zipper: Easy to don/doff capability.

Front Relief Zipper: Placement that allows User to relieve themselves.

Cuffs & Sleeves Configuration

The cuffs and sleeves shall be comfortable, durable, adjustable, non-restrictive, waterproof.

Field replaceable wrist seals are desired. Each seal replaceable within 30 seconds after user has been trained on the replacement procedure.

Pre-measured/semi-customized wrist seals (Small, Medium, Large) are desired to minimize the need to trim them after delivery.

Sock Configuration

Attached to pant. Will be worn under boot, needs to be comfortable, low profile, and waterproof.

Stretch socks are desired.

Unique Patterning (seam sizing, seam locations, articulated sleeves, reductions to

Articulated knees and elbows, reduction of uncomfortable pressure point areas, allows for full range of motion without restrictions.

1 February 2016 uncomfortable pressure points, active design cut, reinforced shoulders, elbows and knees)

Padding Built in padding and/or ability to add removable knee pads.

Repair kit with instructions

Repair kit with instructions enclosed in waterproof bag that shall keep the kit and instructions dry during normal use. Repair kit contents will include patches and other material necessary to perform field repair, plus zipper lube and other material necessary for daily care and maintenance.

Use and Care Manual

Manual shall include instructions for normal use, proper care, maintenance, repair and storage.

Design capabilities for potential garment modifications or redesign for operational effectiveness

The offeror’s design capability for potential garment modifications or redesigns for operational effectiveness will be evaluated for the ability to incorporate minor design mods requested by the government.