Amendment 0001.pdf

NSN 7540-01-152-8070 STANDARD FORM 30. (Rev. 10-83) Previous Edition unusable Prescribed by GSA FAR (48 CFR) 53.243

Page of Pages AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code

2. AMENDMENT MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (if applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than item 6) CODE

(x) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

8. NAME AND ADDRESS OF CONTRACTOR (NO., Street, Country, State and ZIP Code)

CODE FACILITY CODE

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning ______ copies of amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OR OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

Check One

A. THIS ORDER ID ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 16B. UNITED STATES OF AMERICA

(Signature of person authorized to sign)

15C. DATE SIGNED

(Signature of Contracting Officer)

16C. DATE SIGNED

Supplementary Page

PAGE 2 OF 2 GS-01P-12-BZ-C-0005/0001

Description of Modification/Amendment:

Solicitation# GS-01P-12-BZ-C-0005

Amendment to Volume 3: The Specifiction

Clarification of Automatic Temperature Controls:

1.Question:

I had some questions regarding the controls in this building. At the walkthrough Travis had mentioned about a future control system that these cooling towers are to hook up through but when I read the controls specs they are very specific about integrating a new DDC system. I was wondering if you could advise what temperature control contractors are approved or if there was a specific system in mind? It seems as that what was said at the walkthrough contradicts the specs. and I want to make sure you are getting the controls system desired because it can have a big impact on future jobs.

1.Answer:

There is not a Building Automation System (BAS) currently in the Building that utilizes Direct Digital Control (DDC) Technology.

The scope of the project requires that any controls shall be installed is provided with a BACNet or LON Connection (open protocol) that can be connected to a future BAS.

There is no planned manufacturer for the future controls. When installed it shall be competitively bid.

The contractor shall provide a control system that implements the sequences of operation shown on the drawings.

Reference: Section 230000 2.16-A The automatic temperature controls for the new cooling tower shall be capable of further connecting to a Building Management System that provides energy management for the campus. All new controls and retrofit of existing shall be capable of functioning with existing automatic controls

Ammendment to Volume 2: The Solicitation

2. l.C Authorized Representatives Email Address:

Change From:

Donna.Maffeo@gsa.com Carolyn.weekes@gsa.com

Change To:

Donna.maffeo@gsa.gov Carolyn.weekes@gsa.gov

GSA/PBS

10 CAUSEWAY ST., RM 1100

BOSTON MA 02222-1077