GENIE GS-1932M specifications~1.pdf

Genie® GS™-1432m & GS-1932m

A

C

B

H F

E

D

G I(1) The metric equivalent of working height adds 2 m to platform height. US adds 6 ft to platform height.

(2) Gradeability applies to driving on slopes and may vary depending on options and machine configurations. See operator’s manual for details regarding slope ratings.

(3) Subject to regional availability.

(4) Weight refers to standard configuration and may vary depending on options and/or country standards.

(5) Floor loading information is approximate and may vary depending on options and machine configurations. It should be used only with adequate safety factors.

Models GS-1432m GS-1932m Measurements US Metric US Metric �Working height max. - indoor(1) 20 ft 1 in 6.30 m 24 ft 2 in 7.55 m �Working height max. - outdoor(1) 18 ft 5.66 m 21 ft 6.57 m A �Platform height max. - indoor 14 ft 1 in 4.30 m 18 ft 3 in 5.55 m A �Platform height max. - outdoor 12 ft 3.66 m 15 ft 4.57 m B �Platform height - stowed 2 ft 7 in 0.78 m 2 ft 10 in 0.87 m C �Platform length - outside 4 ft 7 in 1.40 m 4 ft 7 in 1.40 m C �Platform length - outside, extended 6 ft 7 in 2.00 m 6 ft 7 in 2.00 m �Slide-out platform extension deck - length 2 ft 0.60 m 2 ft 0.60 m D �Platform width - outside 2 ft 6.5 in 0.78 m 2 ft 6.5 in 0.78 m �Guardrail height 3 ft 7 in 1.10 m 3 ft 7 in 1.10 m �Toeboard height 6 in 15 cm 6 in 15 cm E �Machine Height - stowed (fixed guardrails) 6 ft 2 in 1.88 m 6 ft 5 in 1.97 m F �Length machine - stowed

(integrated ladder or w/out ladder) 4 ft 7 in 1.40 m 4 ft 7 in 1.40 m

�Length machine - stowed, extended 6 ft 7 in 2.00 m 6 ft 7 in 2.00 m G �Width 32 in 0.81 m 32 in 0.81 m H �Wheelbase 3 ft 8 in 1.12 m 3 ft 8 in 1.12 m I �Ground clearance (center) - pothole guards retracted 2.8 in 7 cm 2.8 in 7 cm I �Ground clearance - pothole guards deployed 0.75 in 1.90 cm 0.75 in 1.90 cm

Productivity �Max. platform occupancy (in/out) 2 / 1 2 / 1 �Lift capacity 500 lb 227 kg 500 lb 227 kg �Lift capacity - extension deck extended 250 lb 113 kg 250 lb 113 kg �Max. platform drive height 14 ft 1 in 4.30 m 18 ft 2 in 5.55 m �Drive speed - stowed 2.5 mph 4.0 km/h 2.5 mph 4.0 km/h �Drive speed - raised 0.5 mph 0.8 km/h 0.5 mph 0.8 km/h �Gradeability - stowed(2) 25 %/14° 25 %/14° �Turning radius - inside/outside 0 / 4 ft 6 in 0 / 1.37 m 0 / 4 ft 6 in 0 / 1.37 m �Lifting speed - raise/lower 19 / 20 sec 26 / 20 sec �Tilt sensor activation (front to back/side to side) 3° / 1.5° 3° / 1.5° �Tires - solid non-marking 10 × 3 in 25.4 × 7.62 cm 10 × 3 in 25.4 × 7.62 cm

Power �Power - FLA(3) 24 V DC (2 × 12 V 115 Ah) 24 V DC (2 × 12 V 115 Ah) �Power - AGM 24 V DC

(2 × 12 V 115 Ah or 132 Ah or 150 Ah)

24 V DC

(2 × 12 V 115 Ah or 132 Ah or 150 Ah) �Hydraulic tank capacity 1.5 gal 5.7 L 1.5 gal 5.7 L

Weight(4) and Floor Loading(5)

�Weight 1,985 lb 900 kg 2,600 lb 1,179 kg �Weight max. (adding all possible options) 2,064 lb 936 kg 2,680 lb 1,216 kg �Tire load max. 937 lb 425 kg 1257 lb 570 kg �Tire contact pressure 143 psi 988 kPa 164 psi 1,133 kPa �Occupied floor pressure 203 psf 9.73 kPa 254 psf 12.14 kPa

Sound and Vibration Levels �Sound Pressure level (ground workstation) < 70 dBA < 70 dBA �Sound Pressure level (platform workstation) < 70 dBA < 70 dBA �Vibrations < 8 ft 2 in/s² < 2.5 m/s2 < 8 ft 2 in/s² < 2.5 m/s2

Specifications

ANSI A92.20, CSA B354.6Electric Slab Scissor Lifts

PROPERETY

MANAGEMENT

http://www.genielift.com Moorest Highlight

Moorest Highlight

© 2026 Terex Corporation

Genie® GS™-1432m & GS-1932m

S Standard S+ Standard + BtO Build to Order ✔ Standard Features ❍ Options

E-DriveLightweightCompact Footprint

Genie Genuine Accessories(1)

Option availability S S+ BtO

P o w er

FLA flooded lead acid batteries, 115 Ah ✔ ✔ ✔

AGM Maintenance-free batteries, 115 Ah ✔ ❍ ❍

Drive cut-out while charging ✔ ❍ ❍

Power Inverter ✔ ❍ ❍

Rear recessed charger receptacle ✔ ✔ ✔

P la tf o rm

Fixed rails, Half-height swing gate ✔ ✔ ✔

Slide out extension deck ✔ ✔ ✔

Air line to platform ✔ ✔ ❍

Automotive-style horn ✔ ❍ ❍

AC power to platform ✔ ✔ ✔

Descent, tilt and motion alarm ✔ ✔ ✔

Diamond plate platform deck ✔ ✔ ✔

Dual LED flashing beacons ✔ ✔ ✔

Electric horn ✔ ✔ ✔

Lanyard attachment points ✔ ✔ ✔

Platform control guard (PCON) ✔ ✔ ✔

Platform load sense system ✔ ✔ ✔

Proportional drive and lift ✔ ✔ ✔

SmartLink dual zone control system ✔ ✔ ✔

Lift Tools Integrated Access Deck ✔ ❍ ❍

C ha ss is

Lift Connect Telematics ✔ ❍ ❍

Lift Connect with Access Manager upgrade ✔ ❍ ❍

Lift Guard White Noise Alarm ✔ ❍ ❍

Lift Guard Zone Lighting ✔ ❍ ❍

Lift Tools Spill Guard ✔ ✔ ✔

Auxiliary platform lowering ✔ ✔ ✔

Driveable at full height ✔ ✔ ✔

Dual front wheel electric brakes ✔ ✔ ✔

Dual front wheel sealed AC electric drive motors (E-Drive) ✔ ✔ ✔

Electric brake release (E-Drive) ✔ ✔ ✔

On board diagnostic system with battery charge indicator ✔ ✔ ✔

Pothole protection ✔ ✔ ✔

Rear fork pockets ✔ ✔ ✔

Solid non-marking tires ✔ ✔ ✔

Tech Pro Link connector ✔ ✔ ✔

Tie-down and lifting points ✔ ✔ ✔

(1) More accessories available from Genie Genuine Parts.

ANSI A92.20, CSA B354.6Electric Slab Scissor Lifts

* Build to Order

05/26

Product specifications are subject to change without notice or obligation. Photographs and/or drawings herein are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on proper equipment use. Failure to follow instructions in the Operator’s Manual may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied.

Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Terex, Genie, Quality By Design, Xtra Capacity, Lift Power, Lift Guard, Lift Tools, Lift Connect and Tech Pro Link are registered trademarks of Terex Corporation or its subsidiaries.

SKU: Standard Model

• GS1932M1AE0050: GS-1932m, E-Drive, Fixed rails, Half-height swing gate, Lift Tools Spill Guard

SKU: Standard Model

• GS1432M1AE0045: GS-1432m, E-Drive, Fixed rails, Half-height swing gate, Lift Tools Spill Guard http://www.genielift.com

Lift Tools Spill Guard This option reduces the risk of costly hydraulic leaks, allowing you to work over sensitive surfaces without concern.

This accessory can be field retrofitted in less than fifteen minutes. It only requires a one-time installation with easily replaceable absorbent pads.

Lift Tools Access Deck Provides operators with a secondary work surface to elevate them above the platform floor for a productive solution to access hard-to-reach areas. This additional deck installs to the inside of the extension deck guardrails. It is designed with a collapsible guardrail to ensure uninhibited maneuverability for operators using this new accessory.

PART NO. AVAILABLE ON

1291517GT

- 225 lb (102 kg)

GS-1930,

GS-1932

1321967GT

- 222 lb (100 kg)

GS-1432m, GS-1932m

PART NO. AVAILABLE ON

1304508GT GS-1330m

1311819GT

GS-1530 E-Drive, GS-1532 E-Drive, GS-1930 E-Drive, GS-1932 E-Drive

1311820GT

GS-2032 E-Drive, GS-2632 E-Drive, GS-3232 E-Drive

1311821GT

GS-2046 E-Drive, GS-2646 E-Drive, GS-3246 E-Drive, GS-4046 E-Drive

FACTORY FIT GS1432m, GS1932m

Sc isso r L i f t | Accessor i es

Lift Tools™ Work Tray Simple solution for storing small tools within reach. Installs on the upper or lower railing of GS™ scissor lifts, or on top of the platform support of GR™s.

PART NO. AVAILABLE ON

1298461GT

Scissors - 50 lb

(22 kg)

GS-1530, GS-1532,

GS-1930, GS-1932,

GS-2032, GS-2632,

GS-3232, GS-2046,

GS-2646, GS-3246,

GS-4046

1298462GT

GR/QS - 50 lb

(22 kg)

GR-12, GR-15, GR-20

**Buy retrofit drill fixture (1324619GT) for any Legacy GS-1930, GS-1932 Access Decks in field without mounting holes.