277199 PLM_train exterior all 3 2022.pdf
PDF 91 KB Posted
- Attached to
- Removal of 3 Train Carts Federal contract opportunity
- Solicitation number
- FA930123Q0013
About this file
This laboratory report details asbestos testing conducted on samples from Building 6004 at Edwards Air Force Base in California. Samples of paint, coatings, and materials were analyzed for asbestos content using polarized light microscopy. No asbestos was detected in any of the eight samples, which were composed of materials including carbonates, quartz, and binders.
The related federal contract opportunity is solicitation number FA930123Q0013 for the removal of three train carts from Edwards Air Force Base, to be conducted by the Department of the Air Force Materiel Command Test Center. No further details are provided on requirements, response timelines, or other terms for the opportunity.
View the file
Other files for this federal contract opportunity
Show all 32
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Asbestos Detected
Layer Name / Sample Description
Lab ID Sample Location
Bulk Asbestos Analysis by Polarized Light Microscopy
Non-Asbestos Constituents
Laboratory Report
0277199
NVLAP#101926-0
Client ID
Client:
Address: 412 CES/CEOER
EDWARDS AFB CA 93524
EDWARDS AFB
Date Received: 08/04/2022
08/09/2022Date Analyzed:
Job# / P.O. #:
EMC LABS, INC.
Collected: 07/12/2022
EPA Method: Project Name: BLDG 6004 WHEELS
Submitted By: RONALD CZARNECKIAddress:
Collected By:
9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726
08/09/2022Date Reported:
EPA 600/R-93/116
Asbestos Type
225 N. ROSAMOND BLVD
NoPaint/ Coating, Black None Detected0277199-001 6004-CE-01 Carbonates
Quartz Binder/Filler
100%
NoPaint/ Coating, Black None Detected0277199-002 6004-CE-02 Carbonates
NoPaint/ Coating, Black/ Silver None Detected0277199-003 6004-CE-03 Carbonates
NoPaint/ Coating, Black/ Silver None Detected0277199-004 6004-CE-04 Carbonates
NoPaint/ Coating, Black None Detected0277199-005 6004-CE-05 Carbonates
NoPaint/ Coating, Black None Detected0277199-006 6004-CE-06 Carbonates
NoPaint/ Coating, Black None Detected0277199-007 6004-CE-07 Carbonates
Asbestos Detected
Layer Name / Sample Description
Lab ID Sample Location
Bulk Asbestos Analysis by Polarized Light Microscopy
Non-Asbestos Constituents
Laboratory Report
0277199
NVLAP#101926-0
Client ID
Client:
Address: 412 CES/CEOER
EDWARDS AFB CA 93524
EDWARDS AFB
Date Received: 08/04/2022
08/09/2022Date Analyzed:
Job# / P.O. #:
EMC LABS, INC.
Collected: 07/12/2022
EPA Method: Project Name: BLDG 6004 WHEELS
Submitted By: RONALD CZARNECKIAddress:
Collected By:
9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726
08/09/2022Date Reported:
EPA 600/R-93/116
Asbestos Type
225 N. ROSAMOND BLVD
Synthetic FiberNoPaint/ Coating, Black None Detected0277199-008
6004-CE-08
15%
Carbonates Gypsum
85%
Signatory - Lab Director - Kurt Kettler
Distinctly stratified, easily separable layers of samples are analyzed as subsamples of the whole and are reported separately for each discernible layer. All analyses are derived from calibrated visual estimate and measured in area percent unless otherwise noted. The report applies to the standards or procedures identified and to the sample(s) tested. The test results are not necessarily indicative or representative of the qualities of the lot from which the sample was taken or of apparently identical or similar products, nor do they represent an ongoing quality assurance program unless so noted. These reports are for the exclusive use of the addressed client and that they will not be reproduced wholly or in part for advertising or other purposes over our signature or in connection with our name without special written permission. The report shall not be reproduced except in full, without written approval by our laboratory. The samples not destroyed in testing are retained a maximum of thirty days. The laboratory measurement of uncertainty for the test method is approximately less than 1 by area percent.
Accredited by the National Institute of Standards and Technology, Voluntary Laboratory Accreditation Program for selected test method for asbestos. The accreditation or any reports generated by this laboratory in no way constitutes or implies product certification, approval, or endorsement by the National Institute of Standards and Technology. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Polarized Light Microscopy may not be consistently reliable in detecting asbestos in floor coverings and similar non-friable organically bound materials.
Analyst - Mark Steiner
File details come from the government source that posted it. Updated .