FA8650-18-S-5008_Amend 4.pdf

As of Nov 2021

Open Two-Step Advanced Research Announcement (ARA)

Overview Information

To access hyperlinks from this electronic solicitation – Hit CTRL and click on the link.

NAICS Code: The NAICS Code for this acquisition is 541715 and the small business size is 1,000 employees.

Federal Agency Name: Air Force Research Laboratory, AFRL/RXS Materials and

Manufacturing Directorate, Advanced Power and Technology Office (APTO)

ARA Title: APTO – Government Requirement for Advanced Power and Energy

(GRAPE)

ARA Type: AMENDMENT 04

ARA Number: FA8650-18-S-5008

WHITE PAPERS: WILL BE A TWO-STEP SOLICITATION:

First Step: WHITE PAPER DUE DATE AND TIME: This ARA is open and effective from 3 May 2018 until 2 May 2026. White Papers will be considered if received any time prior to 2 May 2026 at 3:00 p.m. Wright-Patterson AFB, OH 3:00 p.m. local time. Please do not send white papers prior to 3 May 2018.

Whitepapers may be submitted electronically to the Contracting POC.

Second Step: PROPOSAL DUE DATE AND TIME: To be provided in the

Requests for Proposals sent to offerors that submit White Papers considered to meet the needs of the Air Force.

FUTURE CALLS WILL BE ISSUED AS AMENDMENTS TO THIS ARA. CALLS

WILL BE ONE OR TWO STEP SOLICITATIONS AND CAN BE OPEN OR CLOSED

**Note The Government will suspend white paper submission for project areas identified in any active Call and this will be stated in the Call announcement. If the

Government receives a white paper tied to an active Call, the white paper will not be reviewed.

ONE STEP CALL (Closed): Periodically over the period of this ARA, Call announcements (Calls) may be issued under FA8650-18-S-5008 to request proposals for specific needs within the Technical Areas described in Section I.1

This amendment will replace all prior versions. White papers are still being accepted for this ARA. This ARA is being modified to allow for

Calls to be issued under it. Please read the ARA in its entirety for specific details on white paper and proposal submissions.

below. Offerors should monitor the official U.S. government website for federal awards at https://SAM.gov in the event this announcement is amended or Calls are issued. CLOSED CALLS will be issued with a specified period for submitting proposals. The proposals are due NLT the date and time specified within the CALL.

ONE STEP CALL (open): Periodically over the period of this ARA, Call announcements (Calls) may be issued under FA8650-18-S-5008 to request proposals for specific needs within the Technical Areas described in Section I.1.

Offerors should monitor the official U.S. government website for federal awards at https://SAM.gov in the event this announcement is amended or Calls are issued.

OPEN CALLS will be issued and remain active for an unspecified period of time and cancelled upon the discretion of the program office.

TWO STEP CALL(Closed): Periodically over the period of this ARA, Call proposals for specific needs within the Technical Areas described in Section I.1.

Step One: Offerors are invited to submit white papers and a Rough Order of

Magnitude (ROM) on their proposed project (which must fall within the Technical Area(s) identified in the CALL”). The white papers are due NLT the date and time specified within the CALL.

Step Two: If a white paper is reviewed favorably with respect to the Government Review Criteria and funding is available, AFRL/RXKM may request a formal technical and cost proposal from the offeror. Due dates and times will be specified in each

Request for Proposal (RFP). Submitted proposals will be evaluated IAW the proposal review information and may be selected for negotiations and award.

Offerors should monitor the official U.S. government website for federal awards at https://beta.SAM.gov in the event this announcement is amended.

TWO STEP CALL(open): Periodically over the period of this ARA, Call proposals for specific needs within the Technical Areas described in Section I.1 .

Step One: Offerors are invited to submit white papers and a Rough Order of Magnitude (ROM) on their proposed project (which must fall within the technical area(s) identified in the call) any time while the CALL remains active IAW the instructions stated in this ARA. CALLS will be issued and remain active for an unspecified period of time and cancelled upon the discretion of the program office.

The period for submitting white papers will remain open as long as the CALL remains active.

Step Two: If a white paper is reviewed favorably with respect to the Government Review Criteria and funding is available, AFRL/RXKM may request a formal technical and cost proposal from the offeror. Due dates and times will be specified in each

Request for Proposal (RFP). Submitted proposals will be evaluated IAW the proposal review information and may be selected for negotiations and award.

Offerors should monitor the official U.S. government website for federal awards at https://beta.SAM.gov in the event this announcement is amended.

NOTE: Any white paper or proposal received at the Government Office designated in this ARA after the exact time specified for receipt of offers is “late” and will not be considered except at the Contracting Point of Contract’s discretion. It should be noted that this installation observes strict security procedures to enter the facility.

These security procedures are NOT considered an interruption of normal Government processes, and proposals received after the above stated date and time as a result of security delays will be considered “late.” Furthermore, note that if offerors utilize commercial carriers in the delivery of proposals, they may not honor time-of-day delivery guarantees on military installations. Be advised, if the U.S. Postal Service is used, this building only receives U.S. Postal Mail twice a week and delivery by that means may not meet the proposal due date and time established herein. Early white paper/proposal submission is encouraged.

Submission: White Papers and CALLS must be submitted via e-mail to the Contracting Point of Contact (POC): Charlotte Chumack, Contracting Officer, AFRL/RXKMS, Bldg 45, 2130 8th St., Wright-Patterson AFB, OH 45433-7541.

Annual Updates: It is noted that for ease of reference this ARA will be republished at yearly intervals for updates.

Solicitation Request: Air Force Research Laboratory, AFRL/RX Materials and Manufacturing Directorate, Wright-Patterson Air Force Base is soliciting white papers on the research effort described below.

Type of Contract/Instrument: The Air Force reserves the right to award

Contract(s) and/or Other Transaction(s) pursuant to 10 U.S.C. 2373, based on the instrument deemed most appropriate. It is anticipated that awards under this ARA will generally be Cost Plus Fixed Fee (CPFF) or Firm Fixed Price (FFP). REMINDER:

Cost reimbursement contracts require successful offerors to have an accounting system considered adequate for tracking costs applicable to the contract.

NOTE: If proposing a Federal Acquisition Regulation (FAR) based contract, the FAR clause references in this ARA shall apply. This announcement incorporates FAR and supplement provisions and clauses by reference.

The full text of these provisions and clauses can be found at http://acquisition.gov

If proposing an Other Transaction (OT) pursuant to 10 U.S.C. 2373, these FAR references and clauses would not apply. The terms and conditions of an OT agreement should be developed and negotiated on a case-by-case basis.

Estimated Program Cost: The total estimated program value is $49,000,000 with multiple awards ranging from $100,000.00 to $5,000,000.00 (the Government reserves the right to exceed this amount if necessary).

Anticipated Number of Awards: The Air Force anticipates awarding multiple awards for this announcement. However, the Air Force reserves the right to award zero, one, or more agreements and/or contracts, for all, some or none of the solicited effort based on the offeror’s ability to perform desired work and funding fluctuations. There is no limit on the number of agreements or contracts that may be awarded to an individual offeror.

Brief Program Summary: Air Force Research Laboratory, AFRL/RX Materials &

Manufacturing Directorate is soliciting white papers and potentially technical and cost proposals under this announcement that support the needs of the Advanced

Power Technology Office (APTO) located in AFRL/RXSC.

APTO’s goal is to transition capability-enhancing alternative energy and power related technologies to military end-users across the Air Force enterprise. APTO engages in technology demonstrations to prove out technologies for the benefit of these end-users. Technologies that offer key benefits to users (e.g., energy resiliency/reliability, increased cost–effectiveness, sustainability, increased environmental sustainability, etc.) may generate interest with end-users.

Communication Between Prospective Offerors and Government Representatives: Dialogue between prospective offerors and Government representatives is encouraged until submission of proposals. Discussions with any of the points of contact shall not constitute a commitment by the Government to subsequently fund or award any proposed effort. No guidance related to technical approach will be given. However, questions related to the objectives of the effort or prior similar efforts may be answered. Only Contracting Officers are legally authorized to commit the Government. If there is any doubt as to whether a response provides a competitive advantage, the answer will be posted publicly via an amendment to this ARA on SAM.gov for all contractors to review. For those white papers not selected to provide a full proposal, notification and feedback will be managed by the Contracting POCs.

Address technical questions to the Technical POC: Albert Boulter, 2179 12th

St, WPAFB, OH 45433-7718, (937) 656-5709, albert.boulter@us.af.mil

Address contracting questions to the Contracting POC: Charlotte Chumack, Contracting Officer, phone number: (937) 713-9876, e-mail address:

charlotte.chumack@us.af.mil

System for Award Management (SAM) Registration: SAM is the primary

Government repository for prospective federal awardee information and the centralized Government system for awards. It replaces CCR/FedReg, On-line

Representations and Certifications (ORCA) and the Excluded Parties Lists System (EPLS). Offerors shall be registered in the KSAM database prior to submitting an invoice and through final payment of any award resulting from this ARA. Offerors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220.

https://www.acquisition.gov/

Full Text Announcement

I. Program Description: The Advanced Power Technology Office (APTO), located in the Air Force Research Laboratory, Materials and Manufacturing Directorate, Systems Support Division, Acquisition Systems Support Branch (AFRL/RXSC) is soliciting white papers (and later technical and cost proposals if after the

Government’s review of the white paper it is determined that the white paper has the potential to best meet the Air Force’s needs) on the following research effort:

1. Statement of Objective/Description of Technical Area(s): The purpose of the ARA is to research and explore alternative energy and energy efficient technologies to provide increased capabilities and benefits to AF installations, equipment, and aircraft. This program shall identify new and emerging advanced power generation and energy efficient technologies to be further developed and transitioned to meet military needs across the Air Force.

Emphasis will on technologies that provide cost reductions, reliability improvements, and enhancements to the performance of Air Force (AF)

Aviation, Expeditionary, Installation, and Ground Support Energy missions.

Technology maturity at the system/subsystem model or prototype demonstration in a relevant environment (Technology Readiness Level 6) is highly preferred in order to enable an APTO technology demonstration.

Descriptors of Materials and Manufacturing Directorate technology interests are presented below in the context of alternative energy and applications which focus on enabling innovative solutions, methods and understanding in the development and application of new materials devices and concepts to meet specific performance goals. The following research areas are of interest.

a. Aviation Energy Innovative solutions that reduce fuel consumption, reduce maintenance and expand/enhance mission capabilities via potential approaches not limited to: lightweight modern materials, drag reduction, electrical and/or lighting modifications, software enhancements, etc. Improvements to fuel intensive legacy aircraft are a priority.

b. Expeditionary Energy Innovative solutions that improve warfighter self-sufficiency in resource poor, inhospitable, austere world-wide operations by reducing energy, water, logistical and operational footprints and risk. Sustainable energy resources are preferred.

c. Installation Readiness Energy Innovative solutions that provide assured and resilient energy or optimize energy used in processes common to air base operations, maintenance depots, research laboratories and test centers.

d. Ground Support Energy Innovative solutions that improve energy efficiency, autonomy, combat agility during CONUS / OCONUS operations, and operator health and safety conditions. Enable electrification of the flight line and associated equipment with full-electric or diesel-electric hybrid solutions.

2. Security REQUIREMENTS

OPERATIONS SECURITY (OPSEC)

The contractor shall participate in all activities associated with the disciplines of the organization’s Industrial Security, Information Security, Personnel Security, Operations Security (OPSEC), and Antiterrorism programs, following appropriate measures in each program as required for this particular contract. Security measures are required to reduce program vulnerability from successful adversary collection, exploitation of critical information, and violations of export control requirements. The prime contractor shall ensure all subcontractors, if applicable, conform to these requirements as required by the prime contractor.

PROGRAM PROTECTION PLAN (PPP) REQUIREMENTS

Any potential critical program information (CPI) generated as part of this effort will be reviewed to determine the need for a PPP or to be included as part of an existing PPP.

3. Within Scope Modifications: Potential offerors are advised that due to the inherent uncertainty of research and development efforts, awards resulting from this announcement may be modified during performance to make within scope changes, to include but not limited to, modifications which increase overall contract ceiling amount.

4. Deliverable Items:

a. Data items, DD Form 1423-1 CDRLs will be utilized on contract awards.

Other Transactions will specify data items on a case-by-case basis.

b. Software: Software deliverables to be determined (TBD) based on proposal, if applicable.

c. Hardware: Hardware deliverables to be determined (TBD) based on proposal, if applicable.

d. Other: To be determined for each award.

5. Schedule: Each award is anticipated to be between 12 to 24 months;

however Period of Performance will be tailored to each award.

6. Other Requirements:

a. Program security classification: It is anticipated that the majority of the awards will be unclassified. However, there may be instances when a secret facility clearance and secret safeguarding capability will be necessary depending on the white paper received. Actual Classification will be established on award-by-award basis. If a DD254 is applicable, offerors must verify their Cognizant Security Office information is current with Defense Security Service (DSS) at www.dss.mil.

b. OPSEC: see Statement of Objectives.

c. Export Control: Information involved in this research effort may be subject to Export Control (International Traffic in Arms Regulation (ITAR)

22 CFR 120-131, or Export Administration Regulations (EAR) 15 CFR 710-774). If effort may be subject to export control, then a Certified DD

Form 2345, Militarily Critical Technical Data Agreement, will be required to be submitted with proposal.

d. Export-Controlled Items: As prescribed by DFARS 225.7901-4, DFARS 252.225-7048, “Export-Controlled Item (JUN 2013)” is contained in this solicitation. This clause shall be contained in ALL resulting contracts.

e. Safety: The following safety requirements will be incorporated into the award: Must comply with all Air Force, federal, state and local safety and environmental regulations. Must comply with system safety requirements contained in MIL-STD 882E, Section 4 “Other Requirements” for any deliverable systems or hardware.

f. Contractor Performance Assessment Reporting System (CPARS) may apply to contract awards resulting from this BAA. Interim and final evaluations of contractor performance for contract awards will be prepared in accordance with AFFARS 5342.1503. The final performance evaluation will be prepared at the time of completion of work. In addition to the final evaluation, interim evaluation(s) will be prepared annually. Awardees will be requested to provide a POC to receive notifications of the opportunity to provide feedback. The contractor will be permitted 14 days to review the document and to submit additional information or a rebutting statement. If agreement cannot be reached between the parties, the matter will be referred to an individual one level above the Contracting Officer, whose decision regarding the CPARS submission will be final.

Copies of the assessments, contractor responses, and review comments, if any, will be retained as part of the contract file, and may be used to support future award decisions for other procurements.

7. Other Information:

http://www.dss.mil/

a. Government Furnished Property (GFP) Availability: to be determined for each award. Access to appropriate government facilities and platforms will be provided by the government as appropriate and necessary to conduct experimentation. Additional GFP use may be considered if proposed and found to be in the best interest of the Government.

In accordance with FAR 45.201(b), the contractor is responsible for all costs related to making the property available for use, such as payment of all transportation, installation or rehabilitation costs.

If GFP is requested in a proposal, the following clauses/provisions apply:

i. FAR 52.245-1 Government Property or FAR 52.245-1, Alt II if the resulting contract is with a nonprofit organization or applied research at nonprofit organizations (SEP 2021);

ii. FAR 52.245-9 Use and Charges (Apr 2012);

iii. DFARS 252.211-7007, Reporting of Government Furnished Property (Aug 2012);

iv. DFARS 252.245-7001, Tagging, Labeling and Marking of

Government Furnished Property (Apr 2012);

v. DFARS 252.245-7002, Reporting Loss of Government Property (JAN

2021);

vi. DFARS 252.245-7003, Contractor Property Management System

Administration (Apr 2012);

vii. DFARS 252.245-7004, Reporting, Reutilization, and Disposal (Dec

2017).

b. Base Support/Network Access: Base Support/Network Access will be determined for each contract/agreement. If contractor determines use of available base support to be in their best interest, it must be included as such in the white paper and proposal. Use of available base support will not be assumed during technical evaluation unless proposed. If it is determined to apply, language will be in the SOW supplemental

Requirements Document.

c. Data Rights Desired:

(1) Technical Data: Unlimited Rights

(2) Non-Commercial Software (NCS): Unlimited Rights

(3) NCS Documentation: Unlimited Rights

(4) Commercial Computer Software Rights: Customary License

The Air Force Research Laboratory is engaged in the discovery, development, and integration of warfighting technologies for our air, space, and cyberspace forces. As such, rights in technical data and NCS developed or delivered under this contract are of significant concern to the Government. The Government will therefore carefully consider any restrictions on the use of technical data, NCS, and NCS documentation which could result in transition difficulty or less-than full and open competition for subsequent development of this technology.

In exchange for paying for development of the data, the Government expects technical data, NCS, and NCS documentation developed entirely at Government expense to be delivered with Unlimited Rights.

Technical data, NCS, and NCS documentation developed with mixed funding are expected to be delivered with at least Government Purpose

Rights. Offers that propose delivery of technical data, NCS, or NCS documentation subject to Government Purpose Rights should fully explain how the data was developed at private expense. Specifically, offers must explain what technical data, NCS, or NCS documentation developed with costs charged to indirect cost pools and/or costs not allocated to a

Government contract will be incorporated, how the incorporation will benefit the program, and address whether those portions or processes are segregable.

Offerors that propose delivery of technical data, NCS, or NCS documentation subject to Limited Rights, Restricted Rights, or Specifically Negotiated License Rights will be considered. Proposals should fully explain what technical data, NCS, or NCS documentation developed with costs charged to indirect cost pools and/or costs not allocated to a Government contract will be incorporated and how the incorporation will benefit the program and whether those portions or processes are segregable.

Offerors shall include the data rights assertions as required by DFARS 252.227-7017, Identification and Assertion of Restrictions on the

Government’s Use, Release, or Disclosure of Technical Data or Computer Software. The assertions list is included in Section K and due at time of proposals. Assertions must be completed with specificity. Each assertion must identify both the data and each such item, component, or process listed. Nonconforming assertions lists will be rejected.

Terms used in this section are defined in the clauses at 252.227-7013, Rights in Technical Data-Noncommercial Items, and 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation.

THIRD PARTY SOFTWARE (COMMERCIAL AND NONCOMMERCIAL):

DFARS 252.227-7014(d) describes requirements for incorporation of third party computer software. Any third party software (commercial and noncommercial) to be incorporated into a deliverable must be clearly identified in the proposal. Prior to delivery of any third party software, the contractor will obtain an appropriate license for the Government, and the written approval of the contracting officer.

Any third party software to be delivered to the Government that are not reasonably identifiable at proposal submission, must still be approved by the contracting officer prior to incorporation into a system deliverable.

This obligation to obtain pre-approval by the contracting officer, as described above, continues throughout contract administration.

The Government will neither accept nor execute a DD Form 250 for the software deliverables until the Contractor obtains from all third party software suppliers and/or vendors (Licensor) licenses that comply with the following terms and conditions for the Government (Licensee):

1. The license shall not subject the Government to liability that is indefinite or indeterminate, such as an indemnification clause, as it would constitute an obligation in advance or in excess of an appropriation and violate the Anti-Deficiency Act.

2. The license shall not create a contingent liability for the Government.

This includes, but is not limited to: unilateral price increases, automatic assessment of charges, and automatic renewal of the license.

3. The license shall be governed by Federal Statutes, Case Law, and

Federal Regulations, and shall not be subject to the laws or jurisdiction of any municipality, state, or foreign country.

4. The license shall not include non-substitution language that would preclude or limit the Government from using another vendor/reseller and/or product to fulfill Government requirements.

5. The license shall not comment on entitlement to attorney fees.

6. The Licensor shall not have the authority to unilaterally terminate the license. All remedies available shall be consistent with the Disputes

Clause in the underlying basic contract.

7. The Licensor shall not have the right to enter the premise or monitor the networks of Licensee for the purpose of auditing the use of the license.

8. The Licensor shall not use any injunctive relief clauses as the Licensor cannot prevent the Licensee from performing mission operations.

9. The Licensor shall not have the authority to control any litigation between a third party and the Licensee.

10. The Licensor shall not use the fact that the Licensee is using the

Licensor's products in any notification to the public (e.g., no publicity rights permitted).

II. Award Information

1. Anticipated Award Date: Award dates will vary. White papers will be accepted for review through 2 May 2026.

2. Anticipated funding for the program (not per contract/agreement)

FY17-FY21 FY22 FY23 FY24 FY25

$9.95M $9.8M $9.75M $9.75M $9.75M

This funding profile is an estimate only and not a contractual obligation for funding. All funding is subject to change due to Government discretion and availability. Potential offerors should be aware that due to unanticipated budget fluctuations funding in any or all areas may change with little or no notice.

III. Eligibility Information

1. Eligible Offeror: This is an unrestricted solicitation. Businesses of all sizes are encouraged to propose on all or any part of this solicitation.

2. Cost Sharing or Matching: Cost Sharing is not required.

3. Federally Funded Research and Development Centers: The following guidance is provided for Federally Funded Research and Development

Centers (FFRDCs) contemplating submitting a proposal, as either a prime or subcontractor. FAR 35.017-1(c) (4) prohibits an FFRDC from competing with any non-FFRDC concern in response to a Federal agency request for proposal for other than the operation of an FFRDC (with exceptions stated in DFARS 235.017-1(c) (4)). There is no regulation prohibiting an FFRDC from responding to a solicitation. However, the FFRDC’s sponsoring agency must first make a determination that the effort being proposed falls within the purpose, mission, general scope of effort, or special competency of the FFRDC, and that determination must be included in the FFRDC’s proposal. In addition, APTO must make a determination that the work proposed would not place the FFRDC in direct competition with domestic private industry. Only after these determinations are made, would a determination be made concerning the FFRDC’s eligibility to receive an award.

4. Government Agencies: If a Government agency is interested in performing work, contact the Program Manager identified in the ARA. If those discussions result in a mutual interest to pursue your agency's participation, the effort will be pursued independent of this announcement.

5. Other:

a. Foreign Participation: Foreign Participation will be considered on a case-by-case basis. If it is determined that Foreign Participation is not allowed, the US Prime Contractor and/or Subcontractor may hire foreign national with prior FDO approval; however, Foreign Nationals will be limited to public domain information only. Public domain information is defined as information that is releasable to the general public and sometimes referred to as open source material. Examples include but are not limited to newspapers, magazines and information posted on the internet. Any proprietary information will have to be appropriately protected.

b. This acquisition may involve data that are subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center (DLSC) and have a legitimate business purpose may participate in this solicitation. Contact the Defense

Logistics Services Center, 74 Washington Avenue N., Battle Creek, Michigan 40917-3084 (1-800-352-3572) for further information on the certification process. You must submit a copy of your approved DD Form 2345, Militarily Critical Technical Data Agreement, with your proposal.

c. There are no limits on the number of white papers an offeror may submit.

d. You may be ineligible for award if all requirements of this solicitation are not met on the white paper (and later proposal) due date as identified above.

IV. White Paper / Proposal and Submission Information

1. Overview: This Announcement contains a Two-Step Open Process described in detail below. White Papers/Proposals submitted shall be in accordance with this announcement. There will be no other solicitation issued in regard to this requirement. The Government intends to review white papers/proposals and award some, all, or none of the proposals received without negotiation/discussion; however, the Government reserves the right to negotiate with those offeror(s) whose proposal is selected for funding.

ONLY WHITE PAPERS ARE BEING SOLICITED INITIALLY. WHITE

PAPERS WILL BE ACCEPTED FROM 3 MAY 2018 TO 2 MAY 2026

In addition to the Two-Step Open Process, ARA CALL Announcements

(CALLS) may be periodically issued under FA8650-18-S-5008 during this period.

Offerors should be alert for any ARA amendments that may permit extensions to the white paper submission date.

2. First Step (White Paper) Instructions:

a. General: The FIRST STEP requests a white paper and a rough order of magnitude (ROM) cost. The white paper shall include a discussion of the nature and scope of the research and the offeror’s proposed technical approach. The Government will review the white papers in accordance http://www.dlis.dla.mil/jcp/ with the FIRST STEP Peer or Scientific Review criteria, set forth in Section V below. Based on this review, the Government will determine which of them have the potential to best meet the Air Force’s needs. Offerors will be notified of the disposition of their white paper. It is anticipated that

Government review of the white papers submitted will take 30 working days. Those offerors submitting white papers assessed as meeting Air Force needs will be asked to submit a technical and cost proposal. Those offerors not requested to submit a technical and cost proposal will be notified but may, however, still elect to submit a technical and cost proposal. An offeror submitting a proposal without first submitting a white paper will not be eligible for an award. The cost of preparing white papers in response to this Solicitation is not considered an allowable direct charge to any resulting or any other contract; however, it may be an allowable expense to the normal bid and proposal indirect cost as specified in FAR 31.205-18.

b. Page Limitation: The White Paper shall be limited to 6 pages prepared and submitted in Word format. Font shall be standard 10-point business font Arial. Character spacing must be “normal,” not condensed in any manner. Pages shall be double-spaced (must use standard double-space function in Microsoft Word), double-sided (each side counts as one page),

8.5 by 11 inches, with at least one-inch margins on both sides, top and bottom. All text, including text in tables and charts, must adhere to all font size and line spacing requirements listed herein. Font and line spacing requirements do not have to be followed for illustrations, flowcharts, drawings, and diagrams. These exceptions shall not be used to circumvent formatting requirements and page count limitations by including lengthy narratives in such items. Pages shall be numbered starting with the cover page being Page 1, and the last page being no greater than Page 6. The page limitation covers all information including indices, photographs, foldouts (counted as 1 page for each 8.5 by 11 portion) tables, charts, appendices, attachments, resumes, etc. The

Government will not consider pages in excess of these limitations.

Offerors should submit their white paper via email in WORD format to the Contracting POC.

c. Format: The white paper will be formatted as follows:

(1) Section A: ARA Number (FA8650-18-S-5008), Title of Program

(Government Requirement for Advanced Power and Energy (GRAPE)), Title of your white paper along with which technology area it fits under (Installation Readiness Energy, Expeditionary Energy, Ground Support Energy or Aviation Energy), Name of Company, Business Size, Company’s Commercial and Government Entity

(CAGE) number, Dun & Bradstreet (D&B) Data Universal Numbering System (DUNS) number, Contracting POC and Technical POC with appropriate telephone numbers, fax numbers, and email addresses for the POCs. Add the following information;

(2) Section B: Period of Performance and Task Objectives;

(3) Section C: Technical Summary and Proposed Deliverables (if any);

and

(4) Section D: Cost of Task (Rough Order of Magnitude (ROM)).

d. Technical Portion: The technical portion of the white paper shall include a discussion of the nature and scope of the research and the offeror’s proposed technical approach/solution. The offeror shall explicitly describe the innovative nature of the research. It may also include any proposed deliverables. Resumes, descriptions of facilities and equipment, a proposed Statement of Work are not required at this point.

e. Cost Portion: The cost portion of the white paper shall include a ROM cost estimate. No detailed price or cost support information should be forwarded; only a time-phased bottom line figure should be provided.

f. Other Information: Multiple white papers within the purview of this announcement may be submitted by each offeror. If the offeror wishes to restrict its white papers, they must be marked with the restrictive language stated in FAR 52.215-1(e).

g. White Paper/Proposal Content Summary: You may be ineligible for award if all requirements of this solicitation are not met on the proposal due date.

3. Second Step (Proposal) Instructions:

a. General Instructions:

(1) The SECOND STEP consists of offerors submitting a technical and cost proposal within 30 working days of the proposal request. After receipt, proposals will be reviewed in accordance with the award criteria in Section V. below. Proposals will be categorized and subsequently selected for negotiations.

(2) Technical/management and cost/business volumes should be submitted in separate volumes and must be valid for 180 days.

(3) Proposals must reference the announcement number FA8650-18-S- 5008 and relevant research area(s).

(4) Offerors must submit one-original and 1 hard copies of their proposals to the Contracting POC.

(5) Offerors must include 1 CD in Microsoft Office or Adobe format containing all electronic versions of required submittals. All electronic versions must match the hard copies.

a) The cost file(s) spreadsheets must be in Microsoft Excel and include the formulas for calculating cost element bases (i.e., G&A, O/H, etc.)

b) The CDs should be labeled with the company name and proposal title.

(6) Offerors are advised that only Contracting Officers are legally authorized to contractually bind or otherwise commit the Government.

(7) The cost of preparing proposals in response to this ARA is not considered an allowable direct charge to any resulting or any other contract; however, it may be an allowable expense to the normal bid and proposal indirect cost as specified in FAR 31.205-18.

(8) No classified technical proposals or cost volumes are expected.

Offerors are encouraged to keep all elements of the proposal package unclassified. In the rare case where an offeror has a need to submit a classified appendix, please contact the technical POC for delivery instructions.

b. Technical/Management Proposal:

(1) Page Limitations: The following describes proposal page limitations:

a) The Technical/Management Proposal shall be limited to 20 pages.

Technical/Management proposals and Statements of Work must be provided in Microsoft Word. Signed pages may be submitted in Adobe.

b) Font shall be standard 10-point business font Arial.

c) Character spacing must be “normal,” not condensed in any manner.

d) Pages shall be double-spaced (must use standard double-space function in Microsoft Word), double sided (each side counts as one page), 8.5 by 11 inches, with at least one-inch margins on both sides, top and bottom.

e) All text, including text in tables and charts, must adhere to all font size and line spacing requirements listed herein. Font and line spacing requirements do not have to be followed for illustrations, flowcharts, drawings, and diagrams. These exceptions shall not be used to circumvent formatting requirements and page count limitations by including lengthy narratives in such items.

f) Pages shall be numbered starting with the cover page being Page

1, and the last page being no greater than Page 20. The page limitation covers all information including indices, photographs, foldouts (counted as 1 page for each 8.5 by 11 portion) tables, charts, appendices, attachments, resumes, etc.

g) The proposal page limit does not include the offeror’s proposed

Statement of Work (SOW); however, the same formatting rules apply to the SOW, which is limited to 10 pages.

h) Please Note: The Government will check the proposal and SOW for conformance to the stated requirements. Any pages in excess of the stated page limitation after the format check will not be considered for review purposes.

(2) The Technical/Management proposal(s) shall include a discussion of the nature and scope of the research and the technical approach.

Additional information on prior work in this area, descriptions of available equipment, use of base support (if desired), data and facilities and resumes of personnel who will be participating in this effort should also be included as attachments to the technical proposal. This volume(s) shall include a SOW(s) detailing the technical tasks proposed to be accomplished under the proposed effort and suitable for contract incorporation. Do not include any proprietary information in the SOW. In addition to the contractor proposed SOW, a Government generated SOW attachment containing additional contracting requirements will be included in any resulting contracts.

(3) Any questions concerning the technical proposal or SOW preparation shall be referred to the Contracting POC.

d. Cost/Business Proposal:

(1) Separate the proposal into a business section and cost section.

a) The business section should contain all business aspects to the proposed contract, such as type of contract, any exceptions to terms and conditions of the announcement, any information not technically related, etc. Provide rationale for exceptions.

b) Identify any technical data that will be delivered with less than unlimited rights.

c) Subcontracting Plans: For efforts to exceed $750,000, Subcontracting Plans shall be submitted in the cost/business proposal. Reference FAR 19.704, DFARS 219.704, and AFFARS

5319.704(a) (1) for subcontracting plan requirements. Small business concerns are exempt from this requirement.

d) Limitations on Pass-Through Charges: As prescribed in FAR

15.408(n)(1) & 15.408(n)(2), provisions 52.215-22, “Limitations on Pass Through Charges- Identification of Subcontract Effort (Oct

2009),” apply.

e) Completed Certifications and Representations are due with the proposal. Offerors may also be required to submit updated or supplemental Certifications and Representations based on the specifics of their proposal.

f) If an offeror proposes the use of Government Furnished Property (GFP), other than GFP identified in the ARA, the offer must specifically identify each piece of GFP in the Cost/Business Proposal and propose and substantiate a rental cost for evaluation purposes in accordance with FAR 45.202. Include the following information in the proposal:

(i) A list describing all Government property that the offeror or its subcontractors propose to use on a rent-free basis. The list shall identify the accountable contract under which the property is held and the authorization for its use (from the contracting officer having cognizance of the property);

(ii) The dates during which the property will be used and, for any property that will be used concurrently in performing two or more contracts, the amounts of the respective uses in sufficient detail to support prorating the rent;

(iii) The amount of rent that would otherwise be charged in accordance with FAR 52.245-9, Use and Charges; and

(iv) The voluntary consensus standard or industry leading practices and standards to be used in the management of Government property, or existing property management plans, methods, practices, or procedures for accounting for property.

(2) Cost Element Breakdown: Clear, concise, and accurate cost proposals reflect the offeror's financial plan for accomplishing the effort contained in the technical proposal. As a part of its cost proposal, the offeror shall submit the information outlined below, together with supporting breakdowns. All direct costs (labor, material, travel, computer, etc.) as well as labor and overhead rates should be provided by contractor fiscal year (CFY). Detailed cost element breakdowns by Government Fiscal Year or calendar year are not required. The supporting schedules may include summary level estimating rationale used to generate the proposed costs. The cost element breakdown(s) should include the following if applicable.

a) Direct Labor: Direct labor should be detailed by number of labor hours by category of labor.

b) Labor and Overhead Rates: Direct labor hours, with their applicable rates, must be broken out and the bases used clearly identified. The source of labor and overhead rates and all pricing factors should be identified. For instance, if a Forward Pricing Rate

Agreement (FPRA) is in existence, that should be noted, along with the Administrative Contracting Officer’s (ACO's) name and telephone number. If the rates are based on current experience in your organization, provide the historical base used and clearly identify all escalation, by year, applied to derive the proposed rates. If computer usage is determined by a rate, identify the basis used and rationale used to derive the rate.

c) Material/Equipment: List all material/equipment items by type and kind with associated costs and advise if the costs are based on vendor quotes, data and/or engineering estimates; provide copies of vendor quotes and/or catalog pricing data.

d) Subcontractor Costs: Submit all subcontractor proposals and analyses with your cost proposal (See FAR 15.404-3(b)). If the subcontractor will not submit cost and pricing information to the offeror, this information must be submitted directly to the

Government for analysis. On all subcontracts and interdivisional transfers, provide the method of selection used to determine the subcontractor and the proposed contract type of each subcontract.

An explanation shall be provided if the offeror proposes a different amount than that quoted by the subcontractor. The offeror’s proposal must:

(i) Identify principal items/services to be subcontracted.

(ii) Identify prospective subcontractors and the basis on which they were selected. If non-competitive, provide selected source justification.

(iii) Identify the type of contractual business arrangement contemplated for the subcontract and provide rationale

(iv) Identify the basis for the subcontract costs (e.g., firm quote or engineering estimate, etc.).

(v) Identify the cost or pricing data submitted by the subcontractor.

(vi) Provide an analysis of the proposed subcontract in accordance with FAR 15.404-3(b). Provide an analysis concerning the reasonableness, realism and completeness of each subcontractor’s proposal. If the analysis is based on comparison with prior prices, identify the basis on which the prior prices were determined to be reasonable. The analysis should include, but not be limited to, an analysis of: materials, labor, travel, other direct costs and proposed profit or fee rates.

e) Special Tooling or Test Equipment: When special tooling, and/or test equipment is proposed, attach a brief description of items and indicate if they are solely for the performance of this particular contract or project and if they are or are not already available in the offeror's existing facilities. Indicate quantities, unit prices, whether items are to be purchased or fabricated, whether items are of a severable nature and the basis of the price. These items may be included under Direct Material in the summary format.

f) Consultants: When consultants are proposed to be used in the performance of the contract, indicate the specific project or area in which such services are to be used. Identify each consultant, number of hours or days to be used and the consultant's rate per hour or day. State the basis of said rate and give your analysis of the acceptability of the consultant's rate.

g) Travel: Travel costs must be justified and related to the needs of the project. Identify the number of trips, the destination and purpose. Travel costs should be broken out by trip with number of travelers, airfare, per diem, lodging, etc.

h) Computer Use: Detail the amount and kind of computer usage, the cost, and how the costs were derived.

i) Facilities Capital Cost of Money: If Facilities Capital Cost of

Money is proposed, a properly executed DD Form 1861 is required.

j) Project Funding Profile: Offerors should include a project funding profile by Government Fiscal Year (GFY) (1 Oct through 30 Sept) for budgetary purposes. This will enable the Government to easily identify program funding needs by GFY.

k) If an offeror takes exceptions to the requirements called out in the announcement (e.g., base support, Government-furnished property (GFP), CDRLs), the exceptions should be clearly stated in the cost proposal.

l) Forward Pricing Rate Agreements: Offerors who have forward pricing rate agreements (FPRA’s) and forward pricing rate recommendations (FPRR’s) should submit them with their proposal.

m) Cost/Business proposals have no page limitations.

d. Proposal Content Summary: You may be ineligible for award if all requirements of this solicitation are not met on the proposal due date.

V. White Paper / Proposal Review Information

1. FIRST STEP – White Paper Peer or Scientific Review Criteria: The Government will review White Papers to determine which of them have the potential to best meet the Air Force’s needs based on the following criteria, which are listed in equal order of importance:

a. Is the technical approach consistent with the technologies listed in the ARA?

b. Is the research of interest to the Government?

c. Is appropriate funding available?

2. SECOND STEP – Proposal Peer or Scientific Review Criteria: Proposals will be reviewed against the criteria listed below. The technical aspect, which is ranked as the first order of priority, shall be reviewed based on the following criteria that are of equal order of importance.

a. Technical:

(1) Unique and innovative approach proposed to accomplish the technical objectives. New and creative solutions and/or advances in knowledge, understanding, technology, and the state of the art.

(2) The offeror’s understanding of the scope of the technical effort.

(3) Soundness of the offeror’s technical approach including whether the proposal identifies major technical risks, clearly defines feasible mitigation efforts, and demonstrates related experience and qualifications of technical personnel.

(4) The potential to transition the research and development deliverables to future Government needs. Any proposed restriction on technical data or computer software will be considered.

(5) Availability of qualified technical personnel and their experience with the applicable technologies.

(6) Availability, from any source, of necessary research, test, laboratory, or shop facilities.

b. Cost/Price: The cost/price criterion includes the realism of the proposed cost. Cost/Price is a substantial factor, but ranked as the second order of priority. (If an offeror proposes the use of GFP other than any GFP identified in this ARA, and that proposed GFP provides the offeror an unfair competitive advantage, then FAR 45.202 requires rental equivalent be applied to the Cost Factor for evaluation purposes only).

3. SECOND STEP / PROPOSAL - Review and Selection Process

a. Categories: Based on the Peer or Scientific Review, proposals will be categorized as Selectable or Not Selectable (see definitions below). The selection of one or more sources for award will be based on the Peer or

Scientific Review, as well as importance to agency programs and funding availability.

(1) Selectable: Proposals are recommended for acceptance if sufficient funding is available

(2) Not Selectable: Even if sufficient funding existed, the proposal should not be funded.

Note: The Government reserves the right to award some, all, or none of proposals. When the Government elects to award only a part of a proposal, the selected part may be categorized as Selectable, though the proposal as a whole may not merit such a categorization.

b. No other criteria will be used.

c. Prior to award of a potentially successful offer, the Contracting Officer will make a determination regarding price reasonableness.

VI. CALLS Proposal and Submission Instructions (One-Step)

** Note: Offerors should be alert for any ARA amendments.

ONE STEP CALL Instructions: One Step Calls will follow the requirements found in IV.3 unless otherwise identified in the individual

CALLS. Proposals against One Step Closed Calls will be due NLT than the date and time specified within the call. Proposals against One Step

Open Calls can be submitted until the Call is canceled by the program office.

VII. Call Proposal Review Information (One-Step)

Proposal Peer or Scientific Review Criteria: One Step Calls will…