Osan_-_Question_Set_3V2.pdf
PDF 72 KB Posted
- Solicitation number
- FA8604-19-R-8108
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Osan_-_Question_Set_6.pdf | ||
| 19R81080003.pdf | ||
| 19R81080002.pdf | ||
| Osan_-_Question_Set_5.pdf | ||
| Osan_-_Question_Set_4.pdf | ||
| Osan_-_Question_Set_2.pdf | ||
| BOS613-01_(REV_A).dwg | DWG drawing | |
| Osan_-_Question_Set_1.docx | DOCX document | |
| 19R81080001.pdf | ||
| BOS613-01.dwg | DWG drawing | |
| 19R8108.pdf | ||
| Proposal_Checklist.Pricing_Summary_Sheet.docx | DOCX document |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MMHS Osan Questions and Answers
FA8604-19-R-8108
Set 3 04/01/2019
Q1. In an earlier response to a question, What is the duty cycle of the Pallet Lifts?”
The answer provided was “15 – 20 cycles per day”
Is that is an 8 hour shift, or, in a full 24-hour day?
16 Hours/Day
Q2. Reference Attachment # 2 – Page 11 of 33 – Section 3.2.8.5.1.5. CYLINDERS
“The surface finish on piston rods and cylinder bore shall be from 0.12 to 0.38 micrometers.”
Would a 0.40 micrometer finish be acceptable? No
Q3. Reference Attachment #2 – Page 12 of 33 – Section 3.2.8.5.1.9. RESERVOIRS
“Access shall be provided thru bolt-on gasketed top and end covers.”
Would a top cover access only be acceptable? Yes
File details come from the government source that posted it.