Osan_-_Question_Set_2.pdf
PDF 73 KB Posted
- Solicitation number
- FA8604-19-R-8108
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Osan_-_Question_Set_6.pdf | ||
| 19R81080003.pdf | ||
| 19R81080002.pdf | ||
| Osan_-_Question_Set_5.pdf | ||
| Osan_-_Question_Set_4.pdf | ||
| Osan_-_Question_Set_3V2.pdf | ||
| BOS613-01_(REV_A).dwg | DWG drawing | |
| Osan_-_Question_Set_1.docx | DOCX document | |
| 19R81080001.pdf | ||
| BOS613-01.dwg | DWG drawing | |
| 19R8108.pdf | ||
| Proposal_Checklist.Pricing_Summary_Sheet.docx | DOCX document |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MMHS Osan Questions and Answers
FA8604-19-R-8108
Set 2 03/29/2019
Q1: Our main conveyor supplier strongly recommends using a minimum of 3.5” for the gravity conveyor rollers outer diameter based on the loads. Are you able to update this requirement? What was the 2.5” rollers in the specification based off of?
A1: The specification states that, “the roller tubes shall be a minimum 2.5-inch outside diameter…” An outside diameter of 3.5” would be acceptable. This specification will not be changed.
Q2: Do you have any conveyor supplier recommendations that we could reach out to for supplying the conveyor portion of this scope?
A2: This is not something that the Government can provide.
Q3: What kind and how long of a warranty is required on the equipment provided?
A3: Warranty requirements are described by the solicitation. Notwithstanding the entirety of the solicitation, contractors may focus attention to FAR 52.212-04, FAR 52.246-17, and Attachment 10 for warranty requirements.
Q4. What is the duty cycle of the Pallet Lifts?
A4: 16/7 – Expect 15 to 20 cycles per day.
Q5. Is there a specific manufacturer that the Pallet Lift specifications were derived from?
A5: No
File details come from the government source that posted it.