ATTACHMENT 6_Solicitation FA860126Q0119_Questions and Answers_8.18.26.pdf

PDF 293 KB Posted

Attached to
National Museum of the United States Air Force (NMUSAF) Artwork Packaging, Transportation, and Delivery
Solicitation number
FA860126Q0119
Issued by

About this file

This is a Questions and Answers document issued by the Department of the Air Force, Air Force Life Cycle Management Center (AFLCMC) on August 18, 2026, responding to inquiries regarding Combined Synopsis/Solicitation FA8601-26-Q-0119 for NMUSAF Artwork Packaging, Transportation, and Delivery.

The solicitation involves the packaging, transportation, and delivery of 992 artworks (including 503 framed pieces and 5 freestanding sculptures) valued at $2,481,500 from Building 1301 at Joint Base Andrews Bay (JBAB) to Wright-Patterson Air Force Base (WPAFB) for storage in 40-foot conex/reefer containers. Individual soft wrapping is acceptable, with groups of items placed in hard-side containers for transport; packing and crating may be completed onsite or at an offsite facility. Unglazed works should be wrapped with Glassine paper only where abrasion risk exists, and materials must be archival-grade where they contact artwork. All five sculptures weigh under 20 pounds each and can be lifted by one person. The contractor must maintain sufficient fine-art insurance covering the full $2,481,500 collection value. Packaging and pickup at JBAB must be completed no later than September 30, 2026, with all packaging, pickup, transport, unloading, and delivery to WPAFB completed within 30 calendar days of contract award. Phased delivery is acceptable. Upon arrival at WPAFB, packaged artwork will be placed directly into storage containers as-is in consultation with the Contracting Officer's Representative. The prime contractor must demonstrate three successful fine-art handling contracts in its past performance; subcontractor experience does not satisfy this requirement. Payment will be made in full (100%) after work completion, acceptance, and invoice submission, with no advance deposits permitted under federal law.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF THE AIR FORCE

AIR FORCE LIFE CYCLE MANAGEMENT CENTER (AFLCMC)

WRIGHT-PATTERSON AIR FORCE BASE OHIO

18 August 2026

SUBJECT: Response to Inquiries regarding Combined Synopsis/Solicitation

FA8601-26-Q-0119, NMUSAF Artwork Packaging, Transportation, Delivery

QUESTIONS AND ANSWERS

1. QUESTION: Is an itemized inventory available with dimensions, weights, individual values, artwork type, and photographs.

ANSWER: See attached Artwork Medium and Dimensions excel file. A final list with individual values can be provided after the contract.

2. QUESTION: Of the 503 framed pieces, how many are under glass or acrylic?

ANSWER: Undetermined, rule of thumb is that if it is a work of art on paper, it will be glazed.

3. QUESTION: Are any pieces oversized, unusually heavy, fragile, wet, unstable, or significantly mold-damaged?

ANSWER: See dimensions in the attached Artwork Medium and Dimensions excel file. Some pieces are large, unframed canvases or art on board but all were easily handled during the inventory. There is one unstable piece, it is already wrapped in plastic and in a box. Many pieces have visible mold damage.

4. QUESTION: Is soft wrapping acceptable, or are custom crates, travel frames, pallets, or rigid containers required?

ANSWER: Individual soft wrapping is acceptable, though groups of items should be placed in some sort of hard side container for transport.

5. QUESTION: Must all packing and crating be completed onsite, or may wrapped items be transported to an offsite crating facility?

ANSWER: Either crating on site or transporting to another facility is acceptable.

6. QUESTION: What temperature and relative-humidity ranges must be maintained? Is continuous environmental monitoring required?

ANSWER: No

7. QUESTION: Are loading docks, freight elevators, liftgates, forklifts, or other handling equipment available at the pickup and delivery locations?

ANSWER: There is a loading dock at Building 1301 at the same level as the artwork storage room. It is about 60ft from the door to the storage room. There will not be a loading dock or other materials to get the artwork off trucks at NMUSAF.

8. QUESTION: What are the dimensions, openings, and weight limits of the destination storage containers?

ANSWER: 40ft conex/reffer containers. We are still working that contract so specific dimensions are not yet available.

9. QUESTION: Is dedicated, nonstop transportation required, and are GPS tracking, two drivers, security escorts, or chain-of-custody documentation required?

ANSWER: No, all that is required is that the art that leaves Building 1301 arrives at NMUSAF without stress or temperature fluctuations.

10. QUESTION: What specific fine-art insurance coverage and endorsements are required for the stated total collection value of $2,481,500?

ANSWER: Written acknowledgment that the vendor carries sufficient insurance to offset any damage or loss of artwork ($2,481,500 in total value) will be considered acceptable proof of insurance.

11. QUESTION: Is an onsite walkthrough or pre-quote inspection available?

ANSWER: A site visit was held on Thursday, 13 August 2026, as detailed in the solicitation posted to SAM.gov.

12. QUESTION: If the prime contractor uses a subcontractor with extensive fine-art handling experience, may the subcontractor’s relevant past performance be considered in meeting the evaluation criteria, or is the requirement that the prime contractor itself possess the three referenced contracts?

ANSWER: As the prime contractor is ultimately responsible for the work completed, the prime contractor’s past experience must show three successful contracts.

13. QUESTION: Is an inventory available showing the dimensions and, if available, approximate weights of the 992 artworks?

ANSWER: See attached Artwork Medium and Dimensions excel file.

14. QUESTION: If individual dimensions are not available, could the Government provide approximate size ranges (e.g., minimum, average, and maximum dimensions) by artwork category?

ANSWER: See attached Artwork Medium and Dimensions excel file.

15. QUESTION: For the five (5) freestanding sculptures, could the Government provide their approximate dimensions and weights, particularly if any require specialized handling or lifting equipment?

ANSWER: See attached Artwork Medium and Dimensions excel file. While we do not have weights for these pieces, each can be lifted by one person. An estimated weight for each of these sculptures is under 20 pounds.

16. QUESTION: Are there any oversized, unusually heavy, fragile, or otherwise specialized pieces among the collection that contractors should account for when preparing their quota. See

ANSWER: See dimensions in the attached Artwork Medium and Dimensions excel file. Some pieces are large, unframed canvases or art on board but all were easily handled during the inventory. There is one unstable piece, it is already wrapped in plastic and in a box. Many pieces have visible mold damage.

17. QUESTION: Unglazed works are to be wrapped and protected with Glassine. Does that include framed items where wrapping materials can be kept from contacting art?

ANSWER: Glassine paper is only necessary for pieces where there may be abrasion from the wrappings on the piece.

18. QUESTION: Should all materials be of archival standards or can common papers, cardboard, and plastic wrap be used where applicable?

ANSWER: The materials should be archival where they would make contact with the artwork.

Common papers, cardboard, and plastic wrap can be used where it does not directly contact the artwork.

19. QUESTION: Many of the unframed works can be safely bundled with glassine dividers. Is this acceptable or should all be fully and individually wrapped?

ANSWER: Safely bundling with dividers is acceptable.

20. QUESTION: Are the flat files containing unframed art to be left at JBAB or will they transfer to WPAFB? If transferring, can they be used as storage for unframed works, while in transit?

ANSWER: They are not slated to move to W-P. There is no prohibition to moving them. It is acceptable to use them as transport as long as the pieces are protected from vibration and shifting during transit.

21. QUESTION: One crate containing a wrapped globe is in art storage. Is that included in the works for transfer?

ANSWER: The globe is not part of this contract move.

22. QUESTION: To ensure sufficient workspace, can wrapped and packaged art be stored in other areas of the building before loading onto trailer?

ANSWER: No, the rest of the building is not secure.

23. QUESTION: Expanding on the previous question, can climate-controlled trailer be left overnight in loading dock and used as storage? If so, will power connections be available for climate control?

ANSWER: This will depend on the type of power connection required and what is available at the bldg.

24. QUESTION: Upon arrival at WPAFB, will artwork require unwrapping or will it be placed in storage containers, as is?

ANSWER: The packaged artwork will be placed in storage containers “as is”. Per the PWS, the contractor shall place the packaged artwork into designated storage containers and the contractor shall ensure that the exact placement of all items is executed in close consultation and coordination with the Contracting Officer's Representative (COR).

25. QUESTION: How far from the loading dock is the art storage location and what, if any, equipment (carts, dollies, etc.) will be available to facilitate final transfer to containers.

ANSWER: There is not loading dock at NMUSAF. Flat carts can be made available.

26. QUESTION: What are the preferred start and target completion dates?

ANSWER: Delivery shall be coordinated with Contracting Officer's Representative (COR) to ensure storage containers are ready to receive the packaged artwork and may begin on or around 28 September 2026. The storage container contract is in process, so exact timing for delivery is not yet known. Per the PWS, the requirement is that packaging and pickup at JBAB shall be completed no later than 30 September 2026. The package, pickup, transport, unloading, and completed delivery of all 992 artworks to WPAFB shall be completed no later than 30 calendar days following contract award.

27. QUESTION: Can project completion be performed in phases or is a single delivery and drop off day preferred?

ANSWER: Delivery can be phased.

28. QUESTION: Upon acceptance of proposal, [vendor] requires a 50% deposit to begin work. The remainder is due upon completion. A vendor payment packet is required to begin the billing process

ANSWER: Under standard Federal contracting regulations and statutory law (including 31 U.S.C.

§ 3324), the U.S. Government is generally prohibited from making advance payments or providing upfront deposits prior to the delivery and acceptance of goods or services. Instead, payment is to be made in full (100%) after the work is successfully completed, accepted by the Government, and a proper invoice is submitted. Payments are typically processed on standard Net 30 terms following the receipt of a valid invoice.

WILLIAM D. TOTH, 2d Lt, USAF

Contracting Officer

AFLCMC/PZIBB

2026-08-18T13:14:50-0400
TOTH.WILLIAM.DEAN.1545725033

File details come from the government source that posted it. Updated .