QuestionsandAnswers-FA860126Q0048_Draft-Final.pdf
PDF 312 KB Posted
- Attached to
- F20641 Open Office Furniture 2025TP202
- Solicitation number
- FA860126Q0048
About this file
This document is a Questions and Answers amendment responding to contractor inquiries regarding solicitation FA8601-26-Q-0048 for AFIT Open Furniture at Facility 20641, Project #2025TP202, issued by the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base in June 2026.
The Q&A clarifies specifications for open office furniture requirements. Key clarifications include: marker boards must be 36" wide and 30" wide (not two 30" boards); all panels require power connectivity; wing panels of at least 24" are acceptable for panel runs exceeding 10' unsupported; monolithic back-to-front (MBF) cabinets are acceptable alternatives to BBF with cushion configurations; notched worksurfaces are acceptable in place of grommets on returns; manufacturers' cut sheets paired with itemized quotes are sufficient documentation for "Basis of Design or Equal" product equivalency claims; and 6x6' cubicles with sliding doors cannot be substituted with 7x6' monolithic panel cubicles at 67" height. One pending question regarding whether Items HP1 and P4 require a panel system or floor-to-ceiling walls with perimeter doors awaits government response via a subsequent Q&A amendment. The document is signed by Contracting Officer Candice Snow of AFLCMC/PZIBA.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
AIR FORCE LIFE CYCLE MANAGEMENT CENTER
WRIGHT-PATTERSON AIR FORCE BASE OHIO
One AFMC…Powering the World’s Greatest Air Force
June 2026
FROM: AFLCMC/PZIBA
2275 D Street Building 16, Area B Wright-Patterson AFB OH 45433
SUBJECT: Response to Inquiries regarding FA8601-26-Q-0048, AFIT Open Furniture, F20641 Project #
2025TP202
Questions: AFIT Open Furniture, F20641 Project # 2025TP202- Solicitation FA8601-26-Q-0048
1. Typical E – For the Marker Boards do you mean you want a 36”w and a 30”w? or (2) 30”w.
Answer: Yes 36” W and 30” W Marker Board
2. According to the cut sheets and furniture plan I looks like ALL panels are to be powered. Is this true?
Answer: Yes
3. Typical MSP1 – For panel runs this long we will need to connect to the stations for support where able. In areas where the panel run is longer that 10’ unsupported, a wing panel (at least 24”) will need to be added for support. Is this acceptable?
4. Typical E /PO1/F.WS01– BBF with cushion will not fit under the desk. Is an MBF acceptable?
5. Is a notched worksurface acceptable in place of the grommet on the return?
6. I’m reviewing the requirements for FA860126Q0048 (Open Office Furniture – Facility 20641).
The cutsheets and SOW reference “Basis of Design or Equal” for several product categories.
a. To ensure our submission is fully compliant, could you please confirm the Government’s preferred format for documenting “equal” product equivalency? For example, would you like a side-by-side comparison to the Minimum Technical Requirements, or is a manufacturer cutsheet sufficient?
Answer: Manufacturers cut sheets along with you itemize quote is sufficient
7. In the case of the F-WS01 type cubicles, unfortunately the requested configuration is 6x6' and does not allow the installation of the sliding door. Due to door requirements, cubicles would need to be at least 7x6'. Can we quote cubicles with a monolithic panel but at a height of 67"h, since for this height we do have a sliding door of 36" Answer: 7x6 cubicles with monolithic panels 67” H are not acceptable.
8. Are you are asking for a panel system or floor to ceiling walls with one door to go around the perimeter? Item HP1 and P4
NOTE: Government response is currently pending. The answer will be provided via a subsequent Questions & Answers amendment as soon as it is finalized.
CANDICE SNOW
AFLCMC/PZIBA, Contracting Officer
| 2026-06-05T11:51:01-0400 | |
| SNOW.CANDICE.LYNN.1423542060 |
File details come from the government source that posted it. Updated .