Attachment 2 - Bid Schedule - 6 June 22.xlsx

XLSX spreadsheet 45 KB Posted Jun 6, 2022

Attached to: CE Facility and Equipment Support
Solicitation number: FA860122R0012
Issued by: Department of the Air Force Materiel Command Lifecycle Management Center Wright Patterson Air Force Base

View the file

Other files

File	Type	Posted
Amendment 8 - Questions_Answers.docx	DOCX document	Oct 6, 2022
Solicitation Amendment FA860122R00120007 SF 30.pdf	PDF	Sep 13, 2022
Attachment 4 - Mech Support Contract Equipment List 13 Sep 22.xlsx	XLSX spreadsheet	Sep 13, 2022
Attachment 4 - Mech Support Contract Equipment List 1 Aug 22 - updated.xlsx	XLSX spreadsheet	Aug 11, 2022
Solicitation Amendment FA860122R00120006 SF 30 - signed.pdf	PDF	Aug 11, 2022
Solicitation Amendment FA860122R00120004 SF 30 - signed.pdf	PDF	Aug 11, 2022
RFI Procedures-Questions-Answers - AMENDMENTS - 7June-updated.xlsx	XLSX spreadsheet	Jun 7, 2022
RFI Procedures-Questions-Answers - AMENDMENTS - 7June.xlsx	XLSX spreadsheet	Jun 7, 2022
Solicitation Amendment FA860122R00120003 SF 30.pdf	PDF	Jun 7, 2022
Attachment 8 - Wage Determination 9May22.pdf	PDF	Jun 7, 2022
Attachment 13 - PastPerformance_Questionnaire - 2 June.docx	DOCX document	Jun 6, 2022
Attachment 3 - PWS 2023 CE Support 31May22.pdf	PDF	Jun 6, 2022
Solicitation Amendment FA860122R00120002 SF 30.pdf	PDF	Jun 6, 2022
RFI Procedures-Questions-Answers - 6June.xlsx	XLSX spreadsheet	Jun 6, 2022
Attachment 1 - Instructions to Offerors and Evaluation Criteria_1Jun22.pdf	PDF	Jun 6, 2022
RFI Procedures-Questions-Answers - AMENDMENTS - 6 June.xlsx	XLSX spreadsheet	Jun 6, 2022
Attachment 13 - PastPerformance_Questionnaire - 2 June.pdf	PDF	Jun 6, 2022
RFI Procedures-Questions-Answers - 31May.xlsx	XLSX spreadsheet	May 31, 2022
Attachment 3 - Performance Work Statement CE Support 25May22.pdf	PDF	May 26, 2022
Attachment 5 - Building Numbers - 25 May 22.xlsx	XLSX spreadsheet	May 26, 2022
Attachment 4 - Mech Support Contract Equipment List 24 May 22.xlsx	XLSX spreadsheet	May 26, 2022
Solicitation Amendment FA860122R00120001 SF 30.pdf	PDF	May 26, 2022
Attachment 2 - Bid Schedule 24 May 2022.xlsx	XLSX spreadsheet	May 26, 2022
Attachment 15 - 711HPW Non-Standard Mech Systems.pdf	PDF	May 26, 2022
Attachment 13 - PastPerformance_Questionnaire.docx	DOCX document	May 25, 2022
RFI Procedures-Questions-Answers - 25May.xlsx	XLSX spreadsheet	May 25, 2022
RFI Procedures-Questions-Answers - 24May.xlsx	XLSX spreadsheet	May 24, 2022
RFI Procedures-Questions-Answers - 23May - Rev3.xlsx	XLSX spreadsheet	May 23, 2022
RY_Lab_Software_Presentation 2021.pptx	PPTX presentation	May 23, 2022
RFI Procedures-Questions-Answers - 23May.xlsx	XLSX spreadsheet	May 23, 2022
RFI Procedures-Questions-Answers - 19May.xlsx	XLSX spreadsheet	May 19, 2022
Attachment 13 - PastPerformance_Questionnaire.docx	DOCX document	May 19, 2022
RFI Procedures-Questions-Answers - 17May.xlsx	XLSX spreadsheet	May 17, 2022
RFI Procedures-Questions-Answers - 16May.xlsx	XLSX spreadsheet	May 16, 2022
RFI Procedures-Questions-Answers.xlsx	XLSX spreadsheet	May 10, 2022
Attachment 11- WPAFB_Preventative_Mx_List.xlsx	XLSX spreadsheet	May 9, 2022
Attachment 8 - Wage Determination 15Mar2022.pdf	PDF	May 9, 2022
Solicitation - FA860122R0012.pdf	PDF	May 9, 2022
Attachment 14 - Subcontractor_Consent_Letter.docx	DOCX document	May 9, 2022
Attachment 3 - PWS 2023 CE Support Contract 5May2022.pdf	PDF	May 9, 2022
Attachment 13 - PastPerformance_Questionnaire.pdf	PDF	May 9, 2022
Attachment 9 - Base_Facility_Standard_Appendices.pdf	PDF	May 9, 2022
Attachment 7 - Over and Under 2500 Procurement Report.pdf	PDF	May 9, 2022
Attachment 6 -MissionEssentialSignedAug21.pdf	PDF	May 9, 2022
Attachment 1 - Instructions to Offerors_Evaluation Criteria.pdf	PDF	May 9, 2022
Attachment 12 - Site Visit Info and Map.pdf	PDF	May 9, 2022
Attachment 10 - CDRLs 26Apr22.pdf	PDF	May 9, 2022
Attachment 5 - Bldg_Numbers.xlsx	XLSX spreadsheet	May 9, 2022
Attachment 4 - Equipment List 2023.xlsx	XLSX spreadsheet	May 9, 2022
Attachment 2 - Bid_Schedule.xlsx	XLSX spreadsheet	May 9, 2022

Show 40 more

50 files listed here. See the rest on GovTribe.

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Instructions

SOURCE SELECTION INFORMATION - SEE FAR 2.101 AND FAR 3.104

Contractor Bid Schedule Instructions

RFP: FA8601-22-R-0012

CE Facility Maintenance and Repair Support

	Instructions:
1	The complete Bid Schedule minus the Instructions Tab and TEP Tab will be incorporated into the contract.
2	Proposed prices/rates are all fully burdened Firm Fixed Price (FFP), with the following exceptions: CLIN 0003 is FFP Estimated, Government populated price.
3	Use no more than two rounding places. All dollar figures used must be rounded to the nearest penny.
4	The Grand Total for all tabs will be added together to determine your Total Evaluated Price. Review your TEP on TEP tab before submitting.

	Regular Labor Instructions:
1	The yellow cells labeled "fill-in" on the tab named "Regular Labor" is where you will insert your pricing information for CLIN 0001. Pricing should be entered at the yearly amount for each position. The table below as well as the provided Performance Work Statement (PWS), Equipment List, Preventative Maintenance task listing, Historical Repairs/Replacement Documents, and other RFP documents are provided to aid you in determine your pricing.
2	There are four trade categories provided below with hours associated with each position for each lab. These positions have been identified as critical/necessary. Offerors are required to determine, add, and price these four positions and any other trade category positions required to perform this effort. Space is provided on the Regular Labor and Overtime Rates tabs to do so in columns labeled "Determined by Offeror." Offeror must identify in tabs labeled "Determined by Offeror (fill-in)" (blue cells) whether a position is technical or non-technical (e.g. Industrial Controls Mechanic (T)). Offerors must justify determination for trades considered technical positions. Use "Labor Category Justification" blocks on the Regular Hours tab to provide justification.
3	Include a corresponding Service Contract Act (SCA) trade name and five digit code for each position entered.
4	The total cost of in US dollars rounded to the nearest penny shall be input into each cell for the associated cost of performing that trade category in each laboratory

	Government Historical Hours
		Labor Category	711 HPW
Lab 3	NASIC
Lab 4	AFPET
Lab 6	AFRL RX
Lab 7	AFRL RQ
Lab 8	AFRL RY
Lab 9	AFRL RYS
Lab 10	Total
		Lead Technician	2080	2080		2080	4160	2080		12480
		Senior Industrial Controls Mechanic	0	0	0	0	0	0	0	0
		Industrial Controls Mechanic	4160			2080	2080	2080		10400
		*Purchasing Specialist	4160				2080			6240
		*Clerk / Office Assistant				2080	0	2080		4160
		Add'l labor categories determined by Offeror	24960	6240	624	12480	29120	20800	3432	97656
		Hour Totals:	35360	8320	624	18720	37440	27040	3432	130936

Note: 2080 = 1 Full Time Equivalent

*If an Offeror believes that the duty descriptions listed for Office Assistant and Purchasing Specialist can be combined and performed by a single individual(s), the Offeror shall update the labor category in Regular Labor and Overtime Labor tabs as necessary to read “Purchasing Spec / Office Asst”.

	Overtime Rates Instructions:
1	The tab named "Overtime Rates" is where you will insert your pricing information for CLIN 0002.
2	Provide an overtime labor rate for positions that you priced in Regular Labor tab, rounded to the nearest penny.
3	Highlight in grey all trade categories that you consider a technical position and write (T) next to the trade category (e.g. Industrial Controls Mechanic (T)).
4	Leave the cell white for all trade categories that you consider a non-technial position. Write (NT) next to the trade category (e.g. Purchasing Specialist (NT)).
5	In the Column labeled "aggregate rate", rows B and E, calculate and insert your aggregate rate of all Technical positions (those shaded grey). The aggregate shall be calculated by taking sum all the OT rates for technical positions and dividing by the total number of technical position rates provided.

	Materials Instructions:
1	Provide a material handling rate (must be a percentage) for each year in the cells labled "fill-in". Rates may differ by year but be static in any given year (i.e. rates may not be provided on a sliding scale).

Regular Labor

Total Evaluated Price

Regular Labor (CLIN 0001) Series

Year 1

Total Evaluated Price (Base + Out Years)

Labor Category

SCA Category

711 HPW - Lab 3

NASIC - Lab 4

AFPET - Lab 6

AFRL/RX - Lab 7

AFRL/RQ - Lab 8

AFRL/RY - Lab 9

AFRL/RYS - Lab 10

Total

Lab 3

Lab 4

Lab 5

Lab 7

Lab 8

Lab 9

Lab 10

Year 1

Lead Technician

fill-in

Year 2

Senior Industrial Controls Mechanic

fill-in

Year 3

Industrial Controls Mechanic

fill-in

Year 4

Purchasing Specialist

fill-in

Year 5

Clerk / Office Assistant

fill-in

6-Month

ERROR:#VALUE!