FFP Addendum 2.docx
DOCX document 13 KB Posted
- Attached to
- Reconfiguration of Visualization Laboratory Federal contract opportunity
- Solicitation number
- FA8601-10-B-0006
About this file
Addendum 2
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| BID OPENING.docx | DOCX document | |
| Map of Twin Base Golf Course.pdf | ||
| RECONFIGURE VIZUALIZATION LAB- Site Visit Roster.docx | DOCX document | |
| 090036_RFI 2- Response.docx | DOCX document | |
| 090036_RFI 3 Response.docx | DOCX document | |
| 090036_RFI 1.docx | DOCX document | |
| General Wage Decision 30 July_OH 29.docx | DOCX document | |
| Project Specifications.pdf | ||
| FA8601-10-B-0006 Solicitation.pdf | ||
| Drawing Addendum 2_Cable Tray Routing.pdf | ||
| FFP Addendum 1.docx | DOCX document | |
| Specs Addendum 1_Section 01 33 00.pdf | ||
| Specs Addendum 1_Section 01 01 50.pdf | ||
| Project Drawings.pdf |
Show all 14
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ADDENDUM NUMBER 2
TO
DRAWINGS AND SPECIFICATIONS
FOR
Reconfigure Visualization Lab, Facility 20248
WRIGHT-PATTERSON AIR FORCE BASE, OHIO
PROJECT NUMBER: ZHTV 090036
1. The contract Drawings and Specifications are hereby amended in part as follows:
A. On sheet E001 add general electrical note:
6. All communications cabling, including voice, data and SINET, shall be provided and installed by the user. This applies to all drawings and specifications. No communications cabling shall be bid as part of this project.
B. Provide (2) 4” EMT conduits and cable tray, 2” high by 8” wide, as shown on the attached sketch.
C. On sheet E201 provide (1) dedicated 20A circuit to each receptacle shown in room 306B. New circuits shall be fed from panel RP1, circuits 30 and 32. Provide all conductors, conduit and circuit breakers necessary. Rewire the circuit shown as necessary to connect the remaining receptacle to circuit RP1-17.
D. On sheet E201 provide (1) floor diffuser in room 306B. Coordinate exact location with 711 HPW/RH.
2. This Addendum Number 2 hereby forms and is made a part of the above named project drawings and specifications.
24 May 2010
File details come from the government source that posted it. Updated .