FA825026R0306.pdf

10. FOR

INFORMATION

CALL:

A. NAME B. TELEPHONE (NO COLLECT CALLS) C. EMAIL ADDRESS

AREA CODE NUMBER EXTENSION

(X) SECTION DESCRIPTION PAGE(S) (X) SECTION DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

A SOLICITATION/CONTRACT FORM I CONTRACT CLAUSES

B SUPPLIES OR SERVICES AND PRICES/COSTS PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

C DESCRIPTION/SPECIFICATIONS/WORK STATEMENT J LIST OF ATTACHMENTS

D PACKAGING AND MARKING PART IV - REPRESENTATIONS AND INSTRUCTIONS

E INSPECTION AND ACCEPTANCE

K

REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORSF DELIVERIES OR PERFORMANCE

G CONTRACT ADMINISTRATION DATA L INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

H SPECIAL CONTRACT REQUIREMENTS M EVALUATION FACTORS FOR AWARD

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause Number 52.232-8)

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS (%)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

AMENDMENT NUMBER DATE AMENDMENT NUMBER DATE

15A. NAME AND

ADDRESS

OF OFFEROR

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AREA CODE NUMBER EXTENSION

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION UNDER THE

UNITED STATES CODE AT:

10 U.S.C. 3204(a) 41 U.S.C. 3304(a) ( )

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

24. ADMINISTERED BY (If other than Item 7) 25. PAYMENT WILL BE MADE BY CODE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

SOLICITATION, OFFER, AND AWARD 1. This Contract is a Rated Order under the Defense Priorities and Allocations System (DPAS) - Code of Federal Regulations - at 15 CFR 700.

RATING

DO: A7

PAGE OF PAGES

2. CONTRACT NUMBER 3. SOLICITATION NUMBER

FA8250-26-R-0306

4. TYPE OF SOLICITATION

SEALED BID (IFB) INVITATION FOR BID

NEGOTIATED (RFP) REQUEST FOR

PROPOSAL

5. DATE ISSUED

16 MAR 2026

6. REQUISITION/PURCHASE NUMBER

FD20202600306

7. ISSUED BY

DEPARTMENT OF THE AIR FORCE, DIRECTORATE OF CONTRACTING

AFSC PZAAA1

6050 GUM LANE BLDG 1215

HILL AIR FORCE BASE UT 84056-5825

BUYER: Nicholas Standiford/AFSC nicholas.standiford@us.af.mil Phone: (000) 777 8182

CODE FA8250

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

8. ADDRESS OFFER TO (If other than item 7)

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time (Hour) (Date)

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision Number 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

11. TABLE OF CONTENTS

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice

AWARD (To be completed by Government)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

STANDARD FORM 33 (REV. 12/2022)

Prescribed by GSA - FAR (48 CFR) 53.214 (c)

J

5:00 16-APR-2026

Nicholas Standiford (000 ) nicholas.standiford@us.af.mil

X X

X X X

X X

X

X

X

X

X

777 -8182

$ SEE SCHEDULE

X

SCD:B

(SEE ESP CLAUSE 252.232-7003.)

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

Requested services are not inherently Government for Service and Repair. Repair effort is deemed performance based. Critical Safety Item (CSI) does not apply to this PI.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

FA8250-26-R-0306

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

In accordance with the attached CAV AF Reporting Requirements (see the document listed in Section J), the Contractor shall include a DD1348-1 when assets are shipped. DCMA Quality Assurance Representatives (QARs) will not approve or sign the DD1348-1, but will ensure a DD1348-1 is included with each returned asset. If a DD1348-1 is not included with each returned asset, DCMA will not sign the receiving report (DD250).

ACO AUTHORITY AND RESPONSIBILITIES:

1) All applicable contract admin functions as outlined in FAR 42.302(a) and DFARS 242.302(a)

2) Extend the delivery schedule as required and take consideration if deemed necessary.

3) Initiate order close out when actions required in paragraph 4) are completed.

4) ACO is to verify Commercial Asset Visibility Air Force (CAVAF) inputs have been made before authorizing payment on the contract. Inputs can be verified by emailing 415SCMS.PMS.Contract@us.af.mil

5) ACO is authorized to take consideration from the contractor for failure to comply with CAVAF inputs.

NOTE: In the case of a Beyond Economical Repair (BER) determination, DCMA QAR shall request disposition instructions and/or condemnation approvals from the cognizant USAF Program Manager or customer, and supply disposition/condemnation instructions to the contractor.

Test, Teardown and Evaluation (TT&E)

NSN 5840015999081

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

5 EA

CLIN ACRN ACRN Total

0001 AA

NSN: 5840-01-599-9081 FD

TRANSMITTER,RADAR

Signal transmitter Metal enclosure with wiring.

Manufacturer Part Number 1L4J7 A9070-010102 3Z966 79105-1 3Z966 79106-1 3Z966 79106-2 3Z966 A9070-010102 Associated Document(s) Line Item(s)

FD20202600306 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Test, Teardown and Evaluation (TT&E)

NSN 5840015999081

Inspection: Origin Acceptance: Origin Receiving Report Required Quality Assurance: Standard Inspection Applicability: None ;

IUID Required: Yes Physical Item Markings:

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A PLANT ORIGIN

Type / Ship To PACRN Mark For

A PLANT PAA

Type / Ship To Quantity (U/I) *ARO After Receipt of

Carcass Req No / Pri

Required Delivery

A PLANT 5 EA *30 Days

Proposed Delivery

A PLANT 5 EA

At Plant

Upon completion of CLIN 0001 a detailed repair quote (simple cost breakdown) SHALL be forwarded to the PCO. The PCO will negotiate and definitize CLIN 0002 via modification. Work shall not begin under CLIN 0002 until notice to proceed is provided from the PCO in the form of a definitization modification.

Repair

NSN 5840015999081

Item No.

Not To Exceed Quantity U/I Estimated Unit Price Not to Exceed Price

5 EA

CLIN ACRN ACRN Total

0002 AA

NSN: 5840-01-599-9081 FD

TRANSMITTER,RADAR

Signal transmitter Metal Enclosure with wires Manufacturer Part Number 1L4J7 A9070-010102 3Z966 79105-1 3Z966 79106-1 3Z966 79106-2 3Z966 A9070-010102 Associated Document(s) Line Item(s)

FD20202600306 0002

Repair

NSN 5840015999081

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Applicability: None ;

IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3215 ORIGIN

Type / Ship To PACRN Mark For A SW3215 PAA Account A Type / Ship To Quantity (U/I) *ARO After Completion of Study Req No / Pri

Required Delivery

A SW3215 5 EA *90 Days

Proposed Delivery

A SW3215 5 EA

The not-to-exceed price quoted on CLIN 0002 represents the maximum extent of work needed to restore the item to serviceable, like-new condition (worst-case-scenario/total rebuild/total overhaul).

All other repair scenarios requiring less resources than the max-extent will definitize lower than the NTE price.

Test, Teardown and Evaluation (TT&E)

NSN 5840016594500

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

3 EA

CLIN ACRN ACRN Total

0003 AA

NSN: 5840-01-659-4500 FD

TRANSMITTER,RADAR

Signal Transmitter Metal Enclosure with wires Manufacturer Part Number 1L4J7 A9070-601802 3Z966 91102-2 3Z966 A9070-601802 Associated Document(s) Line Item(s)

FD20202600306 0003

Test, Teardown and Evaluation (TT&E)

NSN 5840016594500

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Receiving Report Required Quality Assurance: Standard Inspection Applicability: None ;

IUID Required: Yes Physical Item Markings:

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A PLANT ORIGIN

Type / Ship To PACRN Mark For

A PLANT PAA

Type / Ship To Quantity (U/I) *ARO After Receipt of

Carcass Req No / Pri

Required Delivery

A PLANT 3 EA *30 Days

Proposed Delivery

A PLANT 3 EA

At plant

Upon completion of CLIN 0003 a detailed repair quote (simple cost breakdown) SHALL be forwarded to the PCO. The PCO will negotiate and definitize CLIN 0004 via modification. Work shall not begin under CLIN 0004 until notice to proceed is provided from the PCO in the form of a definitization modification.

Repair

NSN 5840016594500

Item No.

Not To Exceed Quantity U/I Estimated Unit Price Not to Exceed Price

3 EA

CLIN ACRN ACRN Total

0004 AA

NSN: 5840-01-659-4500 FD

TRANSMITTER,RADAR

Signal Transmitter Metal Enclosure with wires Manufacturer Part Number 1L4J7 A9070-601802 3Z966 91102-2 3Z966 A9070-601802

Repair

NSN 5840016594500

FD20202600306 0004

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Applicability: None ;

IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3215 ORIGIN

Type / Ship To PACRN Mark For A SW3215 PAA Account A Type / Ship To Quantity (U/I) *ARO After Completion of Study Req No / Pri

Required Delivery

A SW3215 3 EA *150 Days

Proposed Delivery

A SW3215 3 EA

The not-to-exceed price quoted on CLIN 0004 represents the maximum extent of work needed to restore the item to serviceable, like-new condition (worst-case-scenario/total rebuild/total overhaul).

All other repair scenarios requiring less resources than the max-extent will definitize lower than the NTE price.

Test, Teardown and Evaluation (TT&E)

NSN 5840016593010

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

5 EA

CLIN ACRN ACRN Total

0005 AA

NSN: 5840-01-659-3010 FD

TRANSMITTER,RADAR

Transmitter metal enclosure with electronic components Manufacturer Part Number 1L4J7 A9070-101803 3Z966 91103-1 3Z966 91103-2 3Z966 A9070-101803

Test, Teardown and Evaluation (TT&E)

NSN 5840016593010

FD20202600306 0005

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Receiving Report Required Quality Assurance: Standard Inspection Applicability: None ;

IUID Required: Yes Physical Item Markings:

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A PLANT ORIGIN

Type / Ship To PACRN Mark For

A PLANT PAA

Type / Ship To Quantity (U/I) *ARO After Receipt of

Carcass Req No / Pri

Required Delivery

A PLANT 5 EA *90 Days

Proposed Delivery

A PLANT 5 EA

At plant

Upon completion of CLIN 0005 a detailed repair quote (simple cost breakdown) SHALL be forwarded to the PCO. The PCO will negotiate and definitize CLIN 0006 via modification. Work shall not begin under CLIN 0006 until notice to proceed is provided from the PCO in the form of a definitization modification.

Repair

NSN 5840016593010

Item No.

Not To Exceed Quantity U/I Estimated Unit Price Not to Exceed Price

5 EA

CLIN ACRN ACRN Total

0006 AA

NSN: 5840-01-659-3010 FD

TRANSMITTER,RADAR

Transmitter metal enclosure with electronic components Manufacturer Part Number 1L4J7 A9070-101803 3Z966 91103-1

Repair

NSN 5840016593010

3Z966 91103-2 3Z966 A9070-101803 Associated Document(s) Line Item(s)

FD20202600306 0006

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Applicability: None ;

IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3215 ORIGIN

Type / Ship To PACRN Mark For A SW3215 PAA Account A Type / Ship To Quantity (U/I) *ARO After Completion of Study Req No / Pri

Required Delivery

A SW3215 5 EA *90 Days

Proposed Delivery

A SW3215 5 EA

The not-to-exceed price quoted on CLIN 0006 represents the maximum extent of work needed to restore the item to serviceable, like-new condition (worst-case-scenario/total rebuild/total overhaul).

All other repair scenarios requiring less resources than the max-extent will definitize lower than the NTE price.

Test, Teardown and Evaluation (TT&E)

NSN 5840016594499

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

6 EA

CLIN ACRN ACRN Total

0007 AA

NSN: 5840-01-659-4499 FD

TRANSMITTER,RADAR

Radar Transmitter Metal enclosure with wiring Manufacturer Part Number 1L4J7 A9070-651002 3Z966 91102-1

Test, Teardown and Evaluation (TT&E)

NSN 5840016594499

3Z966 A9070-651002 Associated Document(s) Line Item(s)

FD20202600306 0007

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Receiving Report Required Quality Assurance: Certificate of Conformance Applicability: None ;

IUID Required: Yes Physical Item Markings:

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A PLANT ORIGIN

Type / Ship To PACRN Mark For

A PLANT PAA

Type / Ship To Quantity (U/I) *ARO After Receipt of

Carcass Req No / Pri

Required Delivery

A PLANT 6 EA *30 Days

Proposed Delivery

A PLANT 6 EA

At plant

Upon completion of CLIN 0007 a detailed repair quote (simple cost breakdown) SHALL be forwarded to the PCO. The PCO will negotiate and definitize CLIN 0008 via modification. Work shall not begin under CLIN 0008 until notice to proceed is provided from the PCO in the form of a definitization modification.

Repair

NSN 5840016594499

Item No.

Not To Exceed Quantity U/I Estimated Unit Price Not to Exceed Price

6 EA

CLIN ACRN ACRN Total

0008 AA

NSN: 5840-01-659-4499 FD

TRANSMITTER,RADAR

Radar Transmitter Metal enclosure with wiring Manufacturer Part Number

Repair

NSN 5840016594499

1L4J7 A9070-651002 3Z966 91102-1 3Z966 A9070-651002 Associated Document(s) Line Item(s)

FD20202600306 0008

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Certificate of Conformance Applicability: None ;

IUID Required: Yes

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3215 ORIGIN

Type / Ship To PACRN Mark For A SW3215 PAA Account A Type / Ship To Quantity (U/I) *ARO After Completion of Study Req No / Pri

Required Delivery

A SW3215 6 EA *150 Days

Proposed Delivery

A SW3215 6 EA

The not-to-exceed price quoted on CLIN 0008 represents the maximum extent of work needed to restore the item to serviceable, like-new condition (worst-case-scenario/total rebuild/total overhaul).

All other repair scenarios requiring less resources than the max-extent will definitize lower than the NTE price.

Commercial Asset Visibility Air Force (CAVAF)

Data Item No. A001, A002 and A003 Item No.

Not Separately Priced Quantity U/I Unit Price

1 EA NSP

Data IAW DD Form 1423-1 Data Item No.A001,A002 and A003 CAVAF CDRL Associated Document(s) Line Item(s)

FD20202600306 0009

Commercial Asset Visibility Air Force (CAVAF)

Data Item No. A001, A002 and A003

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Letter of Transmittal Quality Assurance: Standard Inspection

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A FB2029 DESTINATION

Type / Ship To Quantity (U/I) *ARO following a supply or maintenance transaction

Req No / Pri

Required Delivery

A FB2029 1 EA *24 Hours

Proposed Delivery

A FB2029 1 EA

IAW DD Form 1423-1

DCMA shall coordinate with CAVAF monitor to ensure requirements are met prior to Repair Invoice Acceptance. If CAVAF requirements are not met in accordance with the CDRL then payment may be withheld until CAVAF requirements are met. DCMA shall not provide acceptance until receipt of concurrence from CAVAF monitor.

The prices of not-separately-priced DATA are included in the price of the individual Repair CLIN 0002, 0004, 0006 and 0008. Failure to comply with contract data requirements may result in the withholding of payment on the aforementioned CLINs. This allows the government to withhold payment on the repairs if the contractor does not deliver the required data. The data is a material requirement of the contract.

Repairable Item Inspection Report (RIIR)

Data Item No. B001 Item No.

Not Separately Priced Quantity U/I Unit Price

2 EA NSP

Data IAW DD Form 1423-1 Data Item No.B001 Repair Item Inspection Report.

Associated Document(s) Line Item(s)

FD20202600306 0010

Repairable Item Inspection Report (RIIR)

Data Item No. B001

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A FY2073 DESTINATION

Type / Ship To Quantity (U/I) *ARO after completion of the contract

Req No / Pri

Required Delivery

A FY2073 2 EA *7 Calendar Days

Proposed Delivery

A FY2073 2 EA

IAW DD 1423-1

The prices of not-separately-priced DATA are included in the price of the individual Repair CLIN 0002, 0004, 0006 and 0008. Failure to comply with contract data requirements may result in the withholding of payment on the aforementioned CLINs. This allows the government to withhold payment on the repairs if the contractor does not deliver the required data. The data is a material requirement of the contract.

Counterfeit Prevention Plan (CPP)

Data Item No. C001 Item No.

Not Separately Priced Quantity U/I Unit Price

2 EA NSP

Data IAW DD Form 1423-1 Data Item No.C001 Counterfeit Protection Plan Associated Document(s) Line Item(s)

FD20202600306 0011

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection

Counterfeit Prevention Plan (CPP)

Data Item No. C001

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A FY2073 DESTINATION

Type / Ship To Quantity (U/I) *ARO after award Req No / Pri

Required Delivery

A FY2073 2 EA *30 Calendar Days

Proposed Delivery

A FY2073 2 EA

IAW DD 1423-1

The prices of not-separately-priced DATA are included in the price of the individual Repair CLIN 0002, 0004, 0006 and 0008. Failure to comply with contract data requirements may result in the withholding of payment on the aforementioned CLINs. This allows the government to withhold payment on the repairs if the contractor does not deliver the required data. The data is a material requirement of the contract.

Engineering Change Proposal (ECP)

Data Item No. D001 Item No.

Not Separately Priced Quantity U/I Unit Price

3 EA NSP

Data IAW DD Form 1423-1 CDRL D001 Engineering Change Proposal (ECP) Associated Document(s) Line Item(s)

FD20202600306 0012

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A FY2073 DESTINATION

Type / Ship To Quantity (U/I) *ARO after completion of Test, Teardown, and Evaluation, AS NEEDED

Req No / Pri

Engineering Change Proposal (ECP)

Data Item No. D001 Required Delivery

A FY2073 3 EA *14 Calendar Days

Proposed Delivery

A FY2073 3 EA

IAW DD 1423-1

The prices of not-separately-priced DATA are included in the price of the individual Repair CLIN 0002, 0004, 0006 and 0008. Failure to comply with contract data requirements may result in the withholding of payment on the aforementioned CLINs. This allows the government to withhold payment on the repairs if the contractor does not deliver the required data. The data is a material requirement of the contract.

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: A FB2029

FB2029 OO ALC DDHU CNTRL RCV

CENTRAL RECEIVING BLDG 849W

CP 385 519 8898

5851 F AVE BLDG 849W

HILL AFB UT 84056 UT 84056-4056

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A FY2073

FY2073 GLSC 415 SCMS

CP 801 586 1368

6041 GUM LANE BLDG 1226

HILL AFB UT 84056-5820 UT 84056-5820

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A PLANT

SHIP IN PLACE 00000-0000

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A SW3215

DLA DISTRIBUTION BARSTOW

CENTRAL RECEIVING WHSE 7

REC OFFICER 442-295-4148

BARSTOW CA 92311-5014 CA 92311-5014

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

52.246-15 CERTIFICATE OF CONFORMANCE (APR 1984)

(IAW FAR 46.315, FAR 46.504)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

Government Contract Quality Assurance Inspection and Acceptance will be at destination(s) specified herein (Final).

Item No(s): 0009, 0010, 0011, 0012

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1))

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c))

52.247-29 F.O.B. ORIGIN (FEB 2006)

(IAW FAR 47.303-1(c))

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c))

52.247-34 F.O.B. DESTINATION (NOV 1991)

(IAW FAR 47.303-6(c))

52.247-48 F.O.B. DESTINATION--EVIDENCE OF SHIPMENT (FEB 1999)

(IAW FAR 47.305-4(c))

Applicable Item No(s) 0009 0010 0011 0012

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b))

Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address:

[CONTRACTOR FILL-IN]

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

TRANSPORTATION APPROPRIATION CHARGEABLE

TAI ATAC FMS ALLOTMENT/Note

TAA

TAA ACRN AA F3RS

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

____________________COMBO________________________

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

____________________INVOICE_________________________

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(f) [Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC DFAS Issue By DoDAAC FA8250 Admin DoDAAC DCMA Inspect By DoDAAC DCMA Ship To Code See Schedule Ship From Code See Schedule Mark For Code Account A Service Approver (DoDAAC) DCMA Service Acceptor (DoDAAC) DCMA Accept at Other DoDAAC See Schedule LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

______WAWF helpdesk at 866-618-5988 or DCMA ACO_______________________ (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed

(The above Clause/Provision has been modified.)

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA 97 X4930 .FC04 64 6 47 GH 8M826L 01K010 00000 UJEZDV 503000 F03000 $0.00

PSR: K42382 FSR: 001884 DSR: 014484 CIN: F2DCCW6048A1030000AA

ACRN TOTAL $ 0.00

ACTIVITY ADDRESS CODE/ROUTING IDENTIFIER CODE (RIC) (MAR 2010)

(IAW AFI 24-230, DoD 4000.25-6M)

(a) The Contractor shall identify any existing Activity Address Code with the designated activity type (EB, ED, EJ, EP, EY or EZ) code, which applies to Contractor's approved F.O.B point when receiving, taking custody, issuing, or shipping DoD assets.

Include existing Routing Identifier Code (RIC), which may be required for accessing Government Data Systems.

(b) Offeror shall insert the existing Activity Address Code and RIC Code, or identify that the Contracting Officer will need to obtain an Activity Address Code and/or Routing Identifier Code (RIC) on contractor’s behalf.

Existing Activity Address Code __________________

Existing Routing Identifier Code (RIC) ________________

[ ] I currently do not possess an Activity Address Code for the designated activity type. Use the following address to obtain the Activity Address Code:

[ ] I currently do not possess a Routing Identifier Code (RIC) for the designated activity type.

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 1991)

(IAW DFARS 201.602-70)

5352.201-9101 OMBUDSMAN (JUN 2023)

(IAW DAFFARS 5301.9103)

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern.

The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Regina E.

Marquardt-Chihuahua at 801 777 -5087 , FAX 000 000 -0000 , email regina.marquardt-chihuahua@us.af.mil . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Department of the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements.

Such inquiries shall be directed to the contracting officer.

52.202-1 DEFINITIONS (JUN 2020)

(IAW FAR 2.201)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(JUN 2020)

(IAW FAR 3.808(b))

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS (JAN 2017)

(IAW FAR 3.909-3 (b))

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-

CONTRACT-RELATED FELONIES (JAN 2023)

(IAW DFARS 203.570-3)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(DEC 2022)

(IAW DFARS 203.970)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (JUN 2020)

(IAW FAR 4.1403(a))

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

(IAW FAR 4.1105(b))

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016)

(IAW DFARS 204.404-70(a))

252.204-7002 PAYMENT FOR SUBLINE ITEMS NOT SEPARATELY PRICED (APR 2020)

(IAW DFARS 204.7109(a))

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING DEVIATION 2024-O0013, REVISION 1 (MAY 2024)

(IAW Class Deviation 2024-O0013 Rev. 1)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (JAN 2023)

(IAW DFARS 204.7403(b), DFARS 212.301(f)(i)(F))

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE

TELECOMMUNICATIONS EQUIPMENT OR SERVICES (JAN 2023)

(IAW DFARS 204.2105(c))

252.204-7020 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (NOV 2023)

(IAW DFARS 204.7304(e))

252.204-7022 EXPEDITING CONTRACT CLOSEOUT (MAY 2021)

(IAW DFARS 204.804-70)

(a) At the conclusion of all applicable closeout requirements of Federal Acquisition Regulation 4.804, the Government and Contractor shall mutually agree on the residual dollar amount remaining on the contract. Both the Government and Contractor agree to waive payment of any residual dollar amount of $1,000 or less to which either party may be entitled at the time of contract closeout.

(b) A residual dollar amount includes all money owed to either party at the end of the contract and as a result of the contract, excluding amounts connected in any way with taxation or a violation of law or regulation.

(c) For purposes of determining residual dollar amounts, offsets (e.g., across multiple contracts or orders) may be considered only to the extent permitted by law.

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(OCT 2024)

(IAW DFARS 205.470)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR

VOLUNTARILY (JAN 2025)

(IAW FAR 9.409)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING

RESPONSIBILITY MATTERS (OCT 2018)

(IAW FAR 9.104-7(c))

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

(IAW FAR 9.108-5(b))

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(MAY 2019)

(IAW DFARS 209.409)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.302)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b))

This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(IAW DFARS 211.274-5(a), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

52.215-2 AUDIT AND RECORDS--NEGOTIATION (JUN 2020)

(IAW FAR 15.209(b)(1))

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h))

52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA

(AUG 2011)

(IAW FAR 15.408(b))

52.215-12 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA (DEVIATION 2022-O0001

(OCT 2021)

(IAW DEVIATION 2022-O0001 REV. 1)

(a) Before awarding any subcontract expected to exceed $2 million, on the date of agreement on price or the date of award, whichever is later; or before pricing any subcontract modification involving a pricing adjustment expected to exceed $2 million, the Contractor shall require the subcontractor to submit certified cost or pricing data (actually or by specific identification in writing), in accordance with Federal Acquisition Regulation (FAR) 15.408, Table 15-2 (to include any information reasonably required to explain the subcontractor’s estimating process such as the judgmental factors applied and the mathematical or other methods used in the estimate, including those used in projecting from known data, and the nature and amount of any contingencies included in the price), unless an exception under FAR 15.403-1(b) applies. If the $2 million threshold for submission of certified cost or pricing data is adjusted for inflation as set forth in FAR 1.109(a), then pursuant to FAR 1.109(d) the changed threshold applies throughout the remaining term of the contract, unless there is a subsequent threshold adjustment.

(b) The Contractor shall require the subcontractor to certify in substantially the form prescribed in FAR 15.406-2 that, to the best of its knowledge and belief, the data submitted under paragraph (a) of this clause were accurate, complete, and current as of the date of agreement on the negotiated price of the subcontract or subcontract modification.

(c) In each subcontract that, when entered into, exceeds $2 million, the Contractor shall insert either—

(1) The substance of this clause, including this paragraph (c), if paragraph (a) of this clause requires submission of certified cost or pricing data for the subcontract; or

(2) The substance of the clause at 52.215-13, Subcontractor Certified Cost or Pricing Data—Modifications (DEVIATION 2022-O0001).

52.215-15 PENSION ADJUSTMENTS AND ASSET REVERSIONS (OCT 2010)

(IAW FAR 15.408(g))

52.215-18 REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS

(PRB) OTHER THAN PENSIONS (JUL 2005)

(IAW FAR 15.408(j))

52.215-19 NOTIFICATION OF OWNERSHIP CHANGES (OCT 1997)

(IAW FAR 15.408(k))

252.215-7002 COST ESTIMATING SYSTEM REQUIREMENTS (JAN 2025)

(IAW DFARS 215.408(1))

252.215-7014 EXCEPTION FROM CERTIFIED COST OR PRICING DATA REQUIREMENTS FOR

FOREIGN MILITARY SALES INDIRECT OFFSETS (DEC 2022)

(IAW DFARS 215.408 (8))

252.217-7028 OVER AND ABOVE WORK (DEC 1991)

(IAW DFARS 217.7702)

(a) Definitions.

As used in this clause--

(1) "Over and above work" means work discovered during the course of performing overhaul, maintenance, and repair efforts that is--

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

(2) "Work request" means a document prepared by the Contractor which describes over and above work being proposed.

(b) The Contractor and Administrative Contracting Officer shall mutually agree to procedures for Government administration and Contractor performance of over and above work requests. If the parties cannot agree upon the procedures, the Administrative Contracting Officer has the unilateral right to direct the over and above work procedures to be followed. These procedures shall, as a minimum, cover--

(1) The format, content, and submission of work requests by the Contractor. Work requests shall contain data on the type of discrepancy disclosed, the specific location of the discrepancy, and the estimated labor hours and material required to correct the discrepancy. Data shall be sufficient to satisfy contract requirements and obtain the authorization of the Contracting Officer to perform the proposed work;

(2) Government review, verification, and authorization of the work; and

(3) Proposal pricing, submission, negotiation, and definitization.

(c) Upon discovery of the need for over and above work, the Contractor shall prepare and furnish to the Government a work request in accordance with the agreed-to procedures.

(d) The Government shall--

(1) Promptly review the work request;

(2) Verify that the proposed work is required and not covered under the basic contract line item(s);

(3) Verify that the proposed corrective action is appropriate; and

(4) Authorize over and above work as necessary.

(e) The Contractor shall promptly submit to the Contracting Officer, a proposal for the over and above work. The Government and Contractor will then negotiate a settlement for the over and above work. Contract modifications will be executed to definitize all over and above work.

(f) Failure to agree on the price of over and above work shall be a dispute within the meaning of the Disputes clause of this contract.

52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (JAN 2025)

(IAW FAR 19.708(a))

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN (JAN 2025)

(IAW FAR 19.708(b))

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN -- ALTERNATE II (NOV 2016)

(IAW FAR 19.708(b)(1)(ii))

52.219-16 LIQUIDATED DAMAGES--SUBCONTRACTING PLAN (SEP 2021)

(IAW FAR 19.708(b)(2))

52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JAN 2025)

(IAW FAR 19.309(c)(1))

(h) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code ________ assigned to contract number _______________.

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(3) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not a women-owned small business concern.

(4) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: _______.]

(5) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The Contractor represents that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) and through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: _______.]

(6) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not a veteran-owned small business concern.

(7) [Complete only if the Contractor represented itself as a veteran-owned small business concern in paragraph (h)(6) of this clause.] The Contractor represents that it [ ] is, [ ] is not a service-disabled veteran-owned small business concern.

(8) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that—

(i) It [ ] is, [ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (h)(8)(i) of this clause is accurate for each HUBZone small business concern participating in the HUBZone joint venture.

[The Contractor shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: _________________________________________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

[Contractor to sign and date and insert authorized signer’s name and title.]

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS) (DEC 2019) (IAW DFARS 219.708(b)(1)(A), DFARS 219.708(b)(1)(A)(1))

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS)--ALTERNATE I

(DEC 2019)

(IAW DFARS 219.708(b)(1)(A)(2), DFARS 219.708(b)(1)(A)(1))

252.219-7004 SMALL BUSINESS SUBCONTRACTING PLAN (TEST PROGRAM) (DEC 2022)

(IAW DFARS 219.708(b)(1)(B))

52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997)

(IAW FAR 22.103-5(a), DAFFARS 5322.101-1)

52.222-3 CONVICT LABOR (JUN 2003)

(IAW FAR 22.202)

52.222-20 CONTRACTS FOR MATERIALS, ARTICLES, AND EQUIPMENT (JUN 2020)

(IAW FAR 22.610)

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (JUN 2020)

(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1))

(a) Definitions. As used in this clause-- “Active duty wartime or campaign badge veteran,” “Armed Forces service medal veteran,” “disabled veteran,” “protected veteran,” “qualified disabled veteran,’ and “recently separated veteran” have the meanings given at Federal Acquisition Regulation (FAR) 22.1301.

(b) Equal opportunity clause. The Contractor shall abide by the requirements of the equal opportunity clause at 41 CFR 60- 300.5(a), as of March 24, 2014. This clause prohibits discrimination against qualified protected veterans, and requires affirmative action by the Contractor to employ and advance in employment qualified protected veterans.

(c) Subcontracts. The Contractor shall insert the terms of this clause in subcontracts valued at or above the threshold specified in FAR 22.1303(a) on the date of subcontract award, unless exempted by rules, regulations, or orders of the Secretary of Labor.

The Contractor shall act as specified by the Director, Office of Federal Contract Compliance Programs, to enforce the terms, including action for noncompliance. Such necessary changes in language may be made as shall be appropriate of identify properly the parties and their undertakings.

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUN 2020)

(IAW FAR 22.1408(a))

(a) Equal opportunity clause. The Contractor shall abide by the requirements of the equal opportunity clause at 41 CFR 60.741.5(a), as of March 24, 2014. This clause prohibits discrimination against qualified individuals on the basis of disability, and requires affirmative action by the Contractor to employ and advance in employment qualified individuals with disabilities.

(b) Subcontracts. The Contractor shall include the terms of this clause in every subcontract or purchase order in excess of the threshold specified in Federal Acquisition Regulation (FAR) 22.1408(a) on the date…