DRAFT PWS_Pour Down Facility_20120612.docx

PERFORMANCE-BASED WORK STATEMENT (PWS)

FOR

Hazardous Material Pour-Down Facility Support

309th MAINTENANCE WING (309 MXW)

Ogden Air Logistics Center, Hill AFB UT 84056

12 June 2012

PERFORMANCE WORK STATEMENT

TABLE OF CONTENTS

SECTION PAGE

A – ACRONYMS AND ABBREVIATIONS LIST

B – PUBLICATIONS AND FORMS

C – SAFETY, FIRE PROTECTION AND HEALTH SPECIFICATION

INDUSTRIAL SAFETY REQUIREMENTS

D – B256 CONSTITUENT LIST

E – STANDARD OPERATING PROCEDURES

F – ESTIMATED WORKLOAD DATA

G– TRAINING TABLE

1. DESCRIPTION OF SERVICES: This Performance Work Statement (PWS) defines service requirements to support operation of the hazardous materials (HAZMAT) pour down facility (PDF) in building 256 and the 309th Maintenance Wing. The contractor shall provide all management, labor, and equipment necessary to minimize HAZMAT usage while ordering, receiving, handling, transporting, distributing, and disposing of HAZMAT. This shall be in accordance with all environmental regulations and Air Force Instructions listed in Appendix B.

This requirement is considered non-mission essential.

1.1 Basic Services: These services will serve to 'pour-down' the HAZMAT to size containers usable on aircraft and aircraft component maintenance lines, to distribute these products to the requiring cell activities, and to recycle or dispose of the products so as to minimize HAZMAT waste. These services require: manual lifting of over 50 lbs; operating contractor-furnished general/special purpose vehicles to include electric forklift and its charger, and delivery/pickup of material in depot supply or other outlying areas.

1.1.1 Ordering/Receiving/Tracking utilizing the Hill AFB Waste Inventory Tracking System (WITS), Enterprise Environment Safety & Occupational Health Management Information System (EESOH-MIS) and the Standardized Data System (SDS). The contractor shall perform all tasks at a minimum of 95% accuracy. The contractor shall:

1.1.1.1 Conduct and document monthly inventory on stored material, including hazardous items for various DMAG Shops at Hill AFB. (CDRL A001).

1.1.1.2 Receive orders from HAZMART or Hazardous Distribution Service Center (HDSC).

1.1.1.3 Assign document number for each order utilizing AF Form 2005 “Issue / Turn-In Request”.

1.1.1.4 Review and assign priorities to supply orders.

1.1.2 Pour down/Delivery: The contractor shall be exposed to and required to work with various chemicals listed in Appendix D, B256 Constituent List. The contractor shall:

1.1.2.1 Print, associate and provide OSHA-compliant hazardous chemical labels on pour-down containers. Print OSHA-compliant hazardous chemical labels for shop day-use containers and provide to customers as requested. The printing of OSHA-compliant hazardous chemical labels for shop day-use containers upon customer request adds an estimated 5-10% material and workload to the pour-down container OSHA-compliant chemical label print material and workload.

1.1.2.2 Deliver pour-downed chemicals to HAZMART, document deliveries and prepare material cost report. The contractor shall perform an electronic transfer of chemicals to HAZMART via EESOH-MIS.

1.1.3 PDF maintenance and management: The Contractor shall accomplish depot supply material functions IAW AFI 32-7086, AFMAN 23-110 Volume III – Part 2, AFMCI 21-129, AFMCI 21-130, AFMCI 21-133, AFI 48-106, and their applicable Hill and 309 MXW supplements. The contractor shall:

1.1.3.1 Provide maintenance material operations to include being proficient with and utilizing the Enterprise Environmental Safety and Occupational Health Management Information System (EESOH) to authorize, order, receive, issue and account for hazardous material.

1.1.3.2 Pick-up, inventory, and restock reusable containers.

1.1.3.3 Manage shelf life items to eliminate hazardous waste disposal in accordance with DODI 4140.27-M.

1.1.3.4 Keep the facility clean and safe according to installation facility requirements and OSHA 29CFR1910 Industrial Standards.

1.1.3.5 Coordinate with the Hill AFB hazardous materials and hazardous waste management programs. The contractor shall contact the Hazardous Waste Control Facility for the transportation and disposition of hazardous waste generated in the PDF.

2. SERVICES SUMMARY

Print, associate, and provide OSHA-compliant hazardous chemical labels on pour-down and shop day-use containers.

Deliver pour-downed chemicals to HAZMART, document deliveries and prepare material cost report. The contractor shall perform an electronic transfer of chemicals to HAZMART via EESOH-MIS.

Provide analysis of monthly workload trends (IAW CDRL A001, A002) providing charts and graphs on a quarterly basis.

Provide reports on internal and external inspections and reconciliation audits listing findings, root cause, and remedies for each finding (IAW CDRL A001). Reports for external inspections will be provided to COR the same day as the inspection. Other reports shall be submitted monthly.

Respond and take corrective action within five (5) calendar days to the quarterly Hazardous Materials Annual Inventory Reconciliation and Evaluation (HM-AIRE) performed by 75 CEG/CEVC. The Contractor shall meet 5% or less error rate. If contractor does not meet the 5% or less error rate, contractor must make correction within five (5) calendar days.

3. GOVERNMENT FURNISHED PROPERTY

3.1 Government Furnished Property (GFP). GFP is not applicable to the performance of this contract. Shared Property of the Government is applicable to the performance of this contract.

3.2 Shared Property of the Government (As Is Condition). Shared Property of the Government shall remain at all times Property of the Government. In accordance with Government procedures, the Contractor is authorized to share Property of the Government, without cost, with Government personnel in Government facilities at Hill AFB UT for the duration of this contract and only as needed for the performance of this contract. The Government maintains accountability for this Shared Property of the Government. This Shared Property of the Government is not considered Government Furnished Property (GFP) requiring property administration IAW FAR Parts 45 and 52.245 plus supplements. The Government Organization that is accountable for this Shared Property of the Government is also responsible for its Disposition. Shared Property of the Government includes engineering drawings and data packages associated with maintaining these systems.

Deliverables:

4. DATA DELIVERABLES: The contractor shall provide management reports on Hazardous Material identifying re-order materials, shelf life, inventory, and backorder status. The reports shall be due on the 5th calendar day of each month for services rendered for the previous month, and shall be 100% errors free (IAW CDRL A001). The error rate shall be based on number of findings divided by the number of possible errors, accomplished by COR surveillance on a random basis.

4.1 The contractor shall provide a quarterly month-to-month workload trend analysis (IAW CDRL A001, A002), with correlating charts and graphs, to be submitted by the 5th calendar day of each month following the calendar quarter.

4.2 The contractor shall provide a monthly cost report with each monthly billing (IAW CDRL A002), to be submitted by the 5th calendar day of each month.

4.3 The contractor shall provide reports on internal (contractor) and external (Government) inspections and reconciliation audits. The reports shall list findings, root causes, and remedies (IAW CDRL A003). External inspection reports shall be provided to the COR on the same day the inspection occurs. Internal inspection reports shall be provided to the COR monthly.

4.4 The Contractor shall provide from its OSHA 300 information the Total Case Incident Rate/Days Away Restricted or Transferred (TCIR/DART) rates by 15 January of each year to the CO (IAW CDRL A004) for submission as part of the installation’s annual OSHA Voluntary Protection Program (VPP) self evaluation report.

5. HAZARDOUS MATERIAL AND ENVIRONMENT CONTROLS

The contractor shall ensure their employees are made aware that the performance of these services will occur in industrial areas. The contractor shall ensure proper protective measures and training is taken to ensure contracted employees are protected from these hazards. Basic Hazardous Material Management Process (HMMP) training shall be completed prior to contractor personnel transporting or using any potentially hazardous materials on the installation. The Contractor shall provide employees with initial 40-hour Hazardous Waste Operations Emergency Response, annual 8-hour Hazardous Waste Operations Refresher per 29 CFR 1910.120 and 29 CFR 1910.1200. Contractor personnel shall obtain training specified in the contractor’s Health and Safety Plan.

5.1 Compliance with Laws and Regulations. The contractor shall be knowledgeable of and comply with all applicable Interstate, Federal, State, and Local laws, regulations, and requirements regarding environmental protection. In the event environmental laws/regulations change during the term of this contract, the contractor is required to comply as such laws come into effect. If there is an increase or decrease in cost as a result of the change, the contractor shall inform the Contracting Officer pursuant to notice requirements and negotiate a modification to the contract.

5.2 Notification of Environmental Spills. If the contractor spills or releases any hazardous chemical into the environment, the contractor or its agent shall immediately clean-up incidental spills in accordance with established procedures, or if spill is significant, report the incident to Hill AFB Fire Dept at 777-1911 and evacuate according to established emergency action plans. The liability for the spill or release of such substances rests solely with the contractor and its agent. A hazardous material control program shall be in effect to inform employees of potential hazards if and when chemicals are used. The Government will provide and maintain access to applicable Material Specification Data Sheets (MSDSs) in accordance with OSHA 29 CFR 1910.1200 and Hill AFB Instruction (HAFBI) 48-106 for review of safety and health information.

5.3 Material Storage and Use. The contractor shall store HM in the process and manner for which it is intended by the manufacturer and as authorized by the HAZMART. The contractor shall follow manufacturer’s guidelines for control of humidity, temperature, cleanliness, and materials handling. This includes the handling, tracking, and storage of hazardous materials, to include flammable and combustible liquids as identified in AFI 32-7086 and NFPA 30. The contractor shall maintain housekeeping /storage methods and procedures of material/work residue to ensure items do not migrate out of the immediate work area to become a potential FOD or fire hazard, and shall inventory all HM lockers for expired materials on a monthly basis. Expired materials shall be managed in accordance with the 309 MXS Hazardous Materials Shelf-Life Management Policy.

5.4 The contractor shall collect spent, used, and expired HM to a container that is managed in accordance with RCRA and the Hill AFB Hazardous Waste Management Plan. In this effort, the contractor shall comply with 40CFR hazardous waste management regulations as specified in the Resource Conservation and Recovery Act (RCRA).

5.5 The Contractor shall respond and take corrective action within ten (10) calendar days to the quarterly Hazardous Materials Annual Inventory Reconciliation and Evaluation (HM-AIRE) performed by 75 CEG/CEVC.

5.5.1 Identification of unauthorized materials and missing High Vapor Pressure Solvent (HVPS) materials, as well as HAZMAT management practices, will be audited.

5.5.2 The Contractor must meet 5% or less error rate. If contractor does not meet the initial 5% or less error rate, contractor must make corrections within five (5) calendar days. The error rate percentage (%) is calculated as follows:

5.5.2.1 The Initial Error Rate % is equal to the 'Total Number of Findings' divided by the 'Total Number of Possible Errors'.

5.5.2.2 The Total Number of Findings is the sum of the number of container errors from Finding 1 and Finding 2 (this does not include containers identified as EESOH-MIS errors).

5.5.2.3 Finding 1: Material handed-out physically, but not issued electronically as directed by AFI 32-7086 (i.e. material not issued properly).

5.5.2.4 Finding 2: Issued material was physically returned to Hazmart, but not electronically turned-in (i.e. material not turned-in properly).

5.5.2.5 The Total Number of Possible Errors is equal to the sum of the number of containers in the electronic and physical inventory of HDSC256.

5.6 The contractor shall implement procedures consistent with the 309 MXW Memorandum dated 24 February 2011, Hazardous Materials Shelf Life Management Policy.

6. CONTRACTOR BASE/NETWORK ACCESS SECURITY

6.1 Access to the Hill AFB computer network will be required.

6.2 Contractor personnel shall abide by all Government rules, procedures and standard of conduct. Contractors requiring access to Government Automated Information Systems (AIS) shall have background investigations and security awareness training completed, after task order award but prior to AIS access.

6.3 Interim access may be granted by Designated Approving Authorities only after submission for NAC and having a Favorable Local File

6.4 Check completed by the 75th Security Forces Squadron or possession of a valid security clearance.

6.5 The following must be completed to receive full access:

6.5.1 Favorable Local File Check completed by the 75th Security Forces Squadron

6.5.2 Submitted Personnel security investigations National Agency Check (NACLC) or Single Scope Background Investigation (SSBI) AFI 33-202, AFMC Supplement 1, Paragraph 3.5.1.1.1.1.

6.5.3 Completed Initial Network User Licensing Computer Based Training (CBT), AFI 33-115 Volume 2, paragraph 4.1 within five (5) working days as directed by the network security manager.

6.5.4 Contractors will complete all required training via TSS. This training is currently available at:

https://ooafmctss.hill.af.mil/TSSPortal/HDHome.aspx?sGuid=D9148323-B368-499C-933F-277127F4BA93

6.5.6. Contractors are required to report in a timely manner (3 days AFI33-202_AFMCS1) to the appropriate security manager & Functional System Administrator, personnel who no longer need network or AIS access.

7. PHYSICAL SECURITY, KEY CONTROL, AND OPERATIONS SECURITY

7.1 The contract officer shall complete a "Request for Identification Credential (AFMC Form 496)" for each employee of the contractor requiring access to Hill AFB. The requests shall be submitted to Pass and Registration (South or West Gate Visitors Center).

7.2 The contractor’s employees, at all times while on a military installation, shall wear visible contractor-provided identification either as a part of, or attached to, their outer clothing. The identification shall clearly identify the individual as being a contractor employee.

7.3 Contract personnel will be working in building 256 which is behind the flight line fence line. Therefore all contracted personnel will be required to obtain flight line badges.

7.4 During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel. At the completion of the contract or at the termination of any employee, the contractor shall return credentials to the Contracting Officer and Unit Security Manager.

7.5 The contractor shall be responsible for safeguarding all government shared property provided for contractor use. At the close of each work period, property and materials shall be secured.

7.6 Key Control. The contractor shall establish and implement methods of ensuring that all keys/key cards issued to the contractor by the government are not lost or misplaced and are not used by unauthorized persons. No keys issued to the contractor by the Government shall be duplicated. NOTE: All references to keys also include key cards.

7.7 The contractor shall immediately report the occurrences of a lost or duplicate key to the appropriate Security Managers. The contractor shall, upon written direction of the contracting officer, rekey or replace the affected lock or locks; however, the government, at its option, may replace the affected lock or locks or perform rekeying. When the replacement of locks or rekeying is performed by the government, the total cost of rekeying or the replacement of the lock or locks shall be deducted from the payment due the contractor.

7.8 The contractor shall prohibit the use of keys issued by the government by any persons other than the contractor’s employees. The contractor shall prohibit the opening of locked areas by contractor employees to permit entrance of persons other than contractor’s employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the Security Managers.

7.9 OPSEC: The contractor shall familiarize all new employees and conduct refresher sessions in the areas of Operations Security (DOD Contract Security Classification Specification) addendum. Operations Security (AFI 10-701 Operations Security as supplemented, and AFI 31-401 Information Security Program, Standards for Storage and Handling Classified Material as supplemented).

8. TRAINING

8.1 Contractor personnel shall attend, at contractor expense, all applicable training required by law, Office of Personnel Management, Department of Defense (DOD), and USAF policy (including AFMC and local policy). The Contractor shall have available for inspection to the COR a current roster of personnel trained.

8.2 The Government may provide training if determined to be in the best interest of the Government. Appendix G lists Government provided training applicable to this contract.

8.2.1 For mandatory training that is only available from the Government, the contractor shall request to attend training courses by submitting request no later than 30 days after the transition start date unless mandatory completion date requirement dictates otherwise. For contractor employees that have previously attended the training, the contractor shall provide documented evidence of attending subject training or equivalent training at start of performance. The Contractor shall ensure that contractor employees are trained in the following subject areas to include, but not limited to: Safety/Fire Prevention/Operational Risk Management (ORM), Security Awareness, Operations Security (OPSEC), Flight-Line Drivers Training, Information Assurance Awareness Training, and OSHA-driven training such as HAZCOM and HAZWOPER.

8.2.2 For specialized training that is only available from the Government, the Government may provide specialized training when available and in its best interest. Specialized training may include, but not limited to, EESOH-MIS.

9. HOURS OF OPERATION

9.1 The Contractor shall perform services required under this contract to a Monday thru Friday, 6:00 a.m. to 2:30 p.m., work schedule.

9.2 Recognized Holidays. The Contractor is not required to provide service on the following days: New Year’s Day, Martin Luther King Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Days, Thanksgiving Day and Christmas Day. If the holiday falls on Saturday, it is observed on Friday. If the holiday falls on a Sunday, it is observed on Monday. In the event that the contractor is prevented from performance as the result of an Executive Order or an Administrative leave determination that applies to the using activity, such time may not be charged to the contract.

10. CONSERVATION OF UTILITIES

The Contractor shall instruct employees in utilities conservation practices.

11. SAFETY REQUIREMENTS: While performing work under this contract, the Contractor shall follow Appendix C and adhere to the following:

11.1 The Air Force is part of the OSHA Voluntary Protection Program (VPP). The Contractor is required to attain familiarization with the requirements of VPP. Information on the VPP can be accessed at http://www.osha.gov/dcsp/vpp/index.html. VPP requirements apply to contractors whose employees work more than 1,000 hours per quarter. The contractor shall flow down these requirements to all subcontractors who qualify as applicable contractors under this contract. The Contractor shall provide from its OSHA 300 information the Total Case Incident Rate/Days Away Restricted or Transferred (TCIR/DART) rates (IAW CDRL A004) by 15 January of each year to the CO for submission as part of the installation’s annual OSHA Voluntary Protection Program (VPP) self evaluation report.

11.2 The contractor shall ensure their employees are made aware that the performance of these services will occur in industrial areas. The industrial complex at Hill AFB has the potential to expose workers to hazardous materials which may include, but is not limited to: hexavalent chrome, cadmium, beryllium, lead and others. While the contractor will not perform duties in a marked and signed regulated area (where exposures are expected to exceed the permissible exposure limits set by 29 CFR1910.10xx), there may be contact hazards with these materials during cleanup of dust, metal shavings, etc. The contractor shall ensure proper protective measures and training are taken to protect contracted employees from these hazards. The 75th Air Base Wing (ABW) Bioenvironmental Engineering Flight has produced industrial hygiene assessments of these areas which are attached.

12. FOREIGN OBJECT DAMAGE AND TOOL CONTROL

12.1 The contractor shall follow the applicable guidance in chapters/ paragraphs/ sections of AFI 21-101 and HQ AFMC supplement to the AFI 21-101 concerning base tool (chapter 10 section B), and Foreign Object Damage (FOD) control policies (chapter 14, and sub paragraphs designated as 41).

12.2 The contractor shall follow control/restrictions of cell phones and personal electronic devices within designated high potential FOD areas (reference chapter 1 sub paragraph 35, Communication) of AFI 21-101 and HQ AFMC, Hill AFB, and 309 MXW supplements.

12.3 If tools, and/or equipment are lost (rags are considered tools); the contractor shall report the loss to the project engineer no later than two hours after discovery. If tools are lost or not accounted for, then the contractor shall implement the lost tool procedures of AFMC supplement to AFI 21-101, chapter 10, section B.

13. PUBLICATIONS:

13.1 Compliance with all publications, regulations and operating instructions provided by the government is required when:

13.1.1 They pertain to the procedures for materials expediting herein and where the contractor is authorized by the PWS to accomplish the work specified in the publication, regulation or operating instructions.

13.1.2 The publications prescribe USAF policies, use of materials, procedures and processes applicable to the work requirements.

13.1.3 The contractor is required to acquire and work on the latest version of the publication.

14. APPENDICES

APPENDIX A

ACRONYMS AND ABBREVIATIONS LIST

EESOH MIS Enterprise Environment Safety & Occupational Health Management Information System

IAW In Accordance With

APPENDIX B

PUBLICATIONS, FORMS, AND STANDARDS

The contractor shall reference most current versions of the below forms and publications:

AF Form 3952 Chemical/Hazardous Material Request Authorization *AFI 10-701 (paragraphs 4.1-4.2) Operations Security (OPSEC) *AFI 21-101 Aircraft and Equipment Maintenance Management (Para. 1.35, Communications; Chapter 10, Tool and Equipment Management; Para. 14.41, Foreign Object Damage) *AFI 21-101 AFMC Supplement 1 Chapter 11, Maintenance Supply Support *AFI 21-101 HAFB Supplement Aircraft and Equipment Maintenance Management *AFI 24-301 Vehicle Operations *AFI 31-501 AFMC Supplement Personnel Security Program Management *AFI 32-7086 (section 2.5.5) HAZMAT Determination and Authorization Procedures for Contractors (1 November 2004 or most current version) *AFI 32-7086 AFMC Supplement 1 (10 April 2006, or most current version) *AFI 32-7086 Hill AFB Supplement Hazardous Materials Management (7 May 2009, or most current version) *AFI 33-115 Volume 2 paragraph 4.1, Licensing Network Users and Certifying Network Professionals *AFI 33-119 Air Force Messaging *AFI33-204 AFMCS1 Information Assurance Awareness Program *AFI 24-301 AFMC Supplement Vehicle Operations *AFMAN 23-110 USAF Supply Manual *AFMCI 21-130 Depot Maintenance Material Control *AFPD 24-3 Operation and Use of Ground Transportation Vehicles HILL AFB I 48-106, HAFB Hazard Communication Program, dated 17 June 2010 309 MXW Memo, Hazardous Materials Shelf-life Management Policy, dated 24 Feb 11 AMXGOI 21-7 Handling, Storage, Packing, Preservation and Delivery of Aircraft Parts/Components AMXGOI 21-12 Condition Tagging and Labeling of Air Force Material AMXGOI 24-5 Use of Low Speed Vehicles Within the 309th Aircraft Maint. Group AMXGOI 24-301 Vehicle Control AMXGOI 32-6 Hazardous Material Management AMXGOI 32-7 Spill Cleanup Policy AMXGOI 31-2 Securing Aircraft Classified Components AMXGOI 91-301 Maintenance Occ. Safety, Fire Prevention, and Health Program FED-STD-313D, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities *Follow web link to obtain direct access to these documents

OGDEN AIR LOGISTICS CENTER

UNITED STATES AIR FORCE

HILL AIR FORCE BASE, UTAH 84056

APPENDIX C

SAFETY, FIRE PROTECTION AND HEALTH SPECIFICATION

INDUSTRIAL SAFETY REQUIREMENTS

TYPE WORK: Pour-Down Facility PREPARED BY: Timothy Helms, 309 MXW/SE, DSN 777-9931

SECTION I - GENERAL REQUIREMENTS

A. Safety Program Requirements.

The Contractor shall conform to all applicable State and Federal and Occupational Safety and Health Act (OSHA) of 1970 as well as fire protection standards for the protection of DoD property and personnel entrusted by this contract. In addition, the contractor shall comply with the Government requirements, either stated or referenced within this Appendix, and/or all safety, fire prevention, traffic and environmental requirements of the installation where the work is being accomplished. Special safety requirements may be added to individual task orders by the requiring activity as the result of the specific work requirements not covered herein. Where Air Force or other standards are divergent, the Contractor shall comply with the most stringent unless waived in writing by the contracting ALC Safety Office.

In context with AFMC Acquisition Reform initiatives, contract language will now focus on ensuring safety objectives are met through contractor risk management rather than the traditional method of providing specific Government guidance for risk elimination. With this new “performance-based” language, the Government will provide the contractor with areas of concern (Protection of government personnel and property) and the contractor will be free to meet those objectives in a manner that is consistent with corporate standards. The contractor will implement a safety program plan that ensures protection of Government personnel and property. The program will consist of, as a minimum:

1. Mishap reporting, as defined in paragraph B1 below.

2. A Safety Plan and corresponding site specific checklist that addresses, as a minimum, the subjects listed in Section II –Specific Requirements, and will be used during the performance of the work described in the contract. The Safety Plan and checklist will be approved by 309 MXW/SE (Safety Office) prior to commencement of any work described in this contract.

3. Routine and recurring surveillance to ensure the safety requirements of this contract are enforced.

4. Competent personnel to provide surveillance of the Safety Plan.

5. Identification of segregated work site locations for operations that cannot be co-mingled with general industrial operations and the process for ACO approval of operations and changes at these specific sites.

6. All contractor personnel shall be trained and qualified to perform their duties safely.

7. The contractor shall include a clause in all subcontracts requiring the subcontractors to comply with the safety provisions of this contract, as applicable.

B. Mishap Notification

1. The contractor shall notify 309 MXW Safety (Phone (801) 586-4176) who in turn will notify 75 ABW/SEG ((801) 777-3333) or 309 Wing Operations Center ( (801) 777-3238), or the Hill AFB Command Post (777-3007) after normal duty hours, and the designated Government Representative, i.e., the ACO, PCO, or COR within one (1) hour of all mishaps or incidents at or exceeding $2,000 (material + labor) in damage to DOD property entrusted by this contract, even if the government is wholly or partially reimbursed. This notification requirement shall also include physiological mishaps/incidents. A written or email copy of the mishap/incident notification shall be sent within three calendar days to the GR, who will forward it to 309 MXW Safety. For information not available at the time of initial notification, the contractor shall provide the remaining information no later than 20 calendar days after the mishap, unless extended by the ACO.

Mishap notifications shall contain, as a minimum, the following information:

(a) Contract, Contract Number, Name and Title of Person(s) Reporting

(b) Date, Time and exact location of accident/incident

(c) Brief Narrative of accident/incident (Events leading to accident/incident)

(d) Cause of accident/incident, if known

(e) Estimated cost of accident/incident (material and labor to repair/replace)

(f) Nomenclature of equipment and personnel involved in accident/incident

(g) Corrective actions (taken or proposed)

(h) Other pertinent information

2. Ensure government contract lease agreements determine convening authority prior to executing the contract/lease agreements, and that all contracts ensure the following, IAW AFI 91-204, paragraph 2.4.6:

· The contractor will support and comply with the safety investigation and report requirements of AFI 91-204

· A record of all mishaps involving Air Force resources will be entered into the Air Force reporting system

· A record of mishaps involving other DoD resources will be forwarded to the involved agencies

· When a mishap involves a contract managed by DCMA, DCMA safety personnel will review the final safety report and send their response to HQ AFSC

3. Ensure contract/lease agreements for aerospace vehicles state: The Air Force is responsible for the investigation of mishaps involving aerospace vehicles. The Air Force is authorized to investigate mishaps involving non-accepted Air Force aerospace vehicles (Non-delivered vehicles for which the government has accepted responsibility; DD Form 250. Material Inspection and Receiving Report, HAS NOT been executed).

4. If requested by authorized government personnel (ACO, PCO, COR, safety representative, Fire Department, and Security Forces), the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records, until released by safety investigators.

C. General Safety Requirements:

If the safety plan is modified, the contractor shall submit the proposed modification, in writing, to the Contract Administration Office safety representative.

Follow all applicable Federal, USAF, state, and local safety directives outlined in Section II below.

SECTION II – SPECIFIC REQUIREMENTS

The contractor’s prepared Safety Plan shall:

· Demonstrate a management commitment to employee safety and health

· Identify applicable rules and regulations

· Identify the roles and responsibilities of Management, Supervisors, Employees and Safety Coordinator

· Identify work to be performed and location of expected operations

· Provide a description of safety program, safety monitoring responsibilities, organizational structure, and contact information for on-site personnel

· Include a work hazard analysis of the worksite and operations to be performed to include baseline hazard identification and required control measures

· Identify employee safety and health training requirements and the documentation process

· Include emergency response plans and procedures that relate to protection of government personnel and property

· Include a workplace inspection frequency, to include the identity of the individual responsible for conducting the inspection

· Include hazard reporting procedures and identify individual(s) responsible for the correcting identified hazards

· Identify first aid and injury procedures

· Identify procedures for accident reporting and investigation

· Identify the process for tracking controlled hazards in contractors work area

· Provide a facility description to include the electrical wiring and fire protection systems (i.e., fire suppression, fire detection, fire extinguishers, fire walls, etc.), required equipment and any other items necessary to fulfill the elements referenced below for the protection of government personnel and property. The contractor’s safety plan shall meet or exceed the referenced standards below.

The authorized Government Representative (309 MXW Safety Office) shall approve the contractor’s procedures within the Health and Safety Plan as meeting the intent of the below referenced standards, with the exception of Mishap Notification / Reporting Procedures, which are outlined in Section I, paragraph B of this Appendix C.

Element/Requirement Referenced Benchmark

Contract Safety *AFPAM 91-210 Para. 6

NFPA 409/410

*AFOSH STD 91-501 Para. 6.2.4.5, 6.2.9, 6.2.10, 6.2.11, and 6.2.17

Para. 22.1 through 22.4 Storage and Materials Handling DoD 4145.19-R-1

Hazardous Material Management *AFI 32-7086 Hill AFB Sup

*Follow web link to obtain direct access to these documents

APPENDIX D

B256 CONSTITUENT LIST

APPENDIX E

STANDARD OPERATING PROCEDURES

APPENDIX F

ESTIMATED WORKLOAD DATA

APPENDIX G

GOVERNMENT PROVIDED TRAINING

image2.emf

Microsoft Office Excel Worksheet PDF_Constituents

EESOH_CHEMICAL_SYNONYM_NM EESOH_INGREDIENT_NM CAS_NO

BUTANONE BUTANONE 78933

ETHYL METHYL KETONE ETHYL METHYL KETONE 78933

METHYL ETHYL KETONE METHYL ETHYL KETONE 78933

2-PROPANOL 2-PROPANOL 67630

ACETONE ACETONE 67641

ISOPROPANOL ISOPROPANOL 67630

ISOPROPANOL ISOPROPANOL (DOT) 67630

ISOPROPYL ALCOHOL ISOPROPYL ALCOHOL 67630

WATER WATER 7732185

2,4-IMIDAZOLIDINEDIONE, 1,3-BIS(HYDROXYMETHYL)-5,5-DIMETHYL- 2,4-IMIDAZOLIDINEDIONE, 1,3-BIS(HYDROXYMETHYL)-5,5-DIMETHYL- 6440580

CARBAMIC ACID, BUTYL-, 3-IODO-2-PROPYNYL ESTER CARBAMIC ACID, BUTYL-, 3-IODO-2-PROPYNYL ESTER 55406536

DIETHANOLAMINE DIETHANOLAMINE 111422

ETHANOL, 2,2'-IMINOBIS- ETHANOL, 2,2'-IMINOBIS- 111422

MONOMETHYLOL -5-DIMETHYLHYDANTION MONOMETHYLOL -5-DIMETHYLHYDANTION 27636824

PHOSPHORIC ACID PHOSPHORIC ACID 7664382

PHOSPHORIC ACID, TRISODIUM SALT, DODECAHYDRATE PHOSPHORIC ACID, TRISODIUM SALT, DODECAHYDRATE 10101890

SODIUM LAURYL SULFATE SODIUM LAURYL SULFATE 151213

SODIUM LAURYL SULPHATE SODIUM LAURYL SULPHATE 151213

SODIUM PHOSPHATE, TRIBASIC SODIUM PHOSPHATE, TRIBASIC 10101890

SULFURIC ACID MONODODECYL ESTER SODIUM SALT SULFURIC ACID MONODODECYL ESTER SODIUM SALT 151213

ACETIC ACID ETHYL ESTER ACETIC ACID ETHYL ESTER 141786

ETHYL ACETATE ETHYL ACETATE 141786

SOLVENT NAPHTHA, PETROLEUM, LIGHT ALIPH. SOLVENT NAPHTHA, PETROLEUM, LIGHT ALIPH. 64742898

TOLUENE TOLUENE 108883

(COCPD) COBALT CARBOXYLATE MIXTURE (COCPD) COBALT CARBOXYLATE MIXTURE 27253312

BARIUM SULFATE BARIUM SULFATE 7727437

BENTONE BENTONE 71011251

BENZENE, ETHYL- BENZENE, ETHYL- 100414

BUTYL ACETATE BUTYL ACETATE 123864

CALCIUM CARBONATE CALCIUM CARBONATE 471341

COBALT COBALT 7440484

CRYSTALLINE SILICA CRYSTALLINE SILICA (QUARTZ) 14808607

DISTILLATES, PETROLEUM, HYDROTREATED LIGHT DISTILLATES, PETROLEUM, HYDROTREATED LIGHT 64742478

FERRIC OXIDE FERRIC OXIDE 1309371

KAOLIN KAOLIN 1332587

LIGHT AROMATIC SOLVENT NAPHTHA (PETROLEUM) LIGHT AROMATIC SOLVENT NAPHTHA (PETROLEUM) 64742956

MINERAL SPIRITS MINERAL SPIRITS 8052413

NAPHTHA (PETROLEUM) HEAVY ALKYLATE NAPHTHA (PETROLEUM) HEAVY ALKYLATE 64741657

N-BUTYL ACETATE N-BUTYL ACETATE 123864

NEODECANOIC ACID, COBALT SALT NEODECANOIC ACID, COBALT SALT 27253312

RED IRON OXIDE PIGMENT RED IRON OXIDE PIGMENT 1309371

SOLVENT NAPHTHA, PETROLEUM, MEDIUM ALIPH. SOLVENT NAPHTHA, PETROLEUM, MEDIUM ALIPH. 64742887

SPECIAL ALKYD EMULSION SPECIAL ALKYD EMULSION 64741419

STODDARD SOLVENT STODDARD SOLVENT 8052413

TITANIUM DIOXIDE TITANIUM DIOXIDE 13463677

XYLENE XYLENE 1330207

XYLENES XYLENES 1330207

1,2,4-TRIMETHYLBENZENE 1,2,4-TRIMETHYLBENZENE 95636

1,3,5-TRIMETHYLBENEZENE 1,3,5-TRIMETHYLBENEZENE 108678

ALUMINIUM FLAKE ALUMINIUM FLAKE 7429905

ALUMINUM ALUMINUM 7429905

BENZENE, 1,2,4-TRIMETHYL- BENZENE, 1,2,4-TRIMETHYL- 95636

BENZENE, 1,3,5-TRIMETHYL- BENZENE, 1,3,5-TRIMETHYL- 108678

BENZENE, 1-CHLORO-4-(TRIFLUOROMETHYL)- BENZENE, 1-CHLORO-4-(TRIFLUOROMETHYL)- 98566

C10-13 ISOPARAFFIN C10-13 ISOPARAFFIN 68551177

COBALT 2- ETHYLHEXANOATE COBALT 2- ETHYLHEXANOATE 136527

CUMENE CUMENE 98828

ETHYL BENZENE ETHYL BENZENE 100414

ETHYLBENZENE ETHYLBENZENE 100414

LIGHT AROMATIC SOLVENT NAPHTHA (PETROLEUM) AROMATIC HYDROCARBON 64742956

LIGHT AROMATIC SOLVENT NAPTHA LIGHT AROMATIC SOLVENT NAPTHA 64742956

MEDIUM MINERAL SPIRITS MEDIUM MINERAL SPIRITS 64742887

METHYL N-AMYL KETONE METHYL N-AMYL KETONE 110430

NAPHTHA NAPHTHA 64742821

NAPHTHA, STODDARD SOLVENT NAPHTHA, STODDARD SOLVENT 8052413

PARA-CHLOROBENZOTRIFLUORIDE PARA-CHLOROBENZOTRIFLUORIDE 98566

P-CHLOROBENZOTRIFLUORIDE P-CHLOROBENZOTRIFLUORIDE 98566

PHENYL, PROPYL SILICONE RESIN PHENYL, PROPYL SILICONE RESIN 68037901

PROPYLENE GLYCOL ISOBUTYL ETHER PROPYLENE GLYCOL ISOBUTYL ETHER 23436193

SOLVENT NAPHTHA SOLVENT NAPHTHA 8030306

SOLVENT NAPHTHA, (PETROLEUM), LIGHT AROM. SOLVENT NAPHTHA, (PETROLEUM), LIGHT AROM. 64742956

VM&P NAPHTHA VM&P NAPHTHA 64742898

1,2,4 TRIMETHYLBENZENE 1,2,4 TRIMETHYLBENZENE 95636

1,3,5-TRIMETHYLBENZENE 1,3,5-TRIMETHYLBENZENE 108678

1,3-BENZENEDICARBOXYLIC ACID, POLYMER WITH 1,3-BIS(2-HYDROXYETHYL)-5,5-DIMETHYL-2,4-IMIDAZOLIDINEDIONE, 2-ETHYL-2-(HYDROXYMETHYL)-1,3-PROPANEDIOL, HEXANEDIOIC ACID AND 1,6-HEXANEDIOL 1,3-BENZENEDICARBOXYLIC ACID, POLYMER WITH 1,3-BIS(2-HYDROXYETHYL)-5,5-DIMETHYL-2,4-IMIDAZOLIDINEDIONE, 2-ETHYL-2-(HYDROXYMETHYL)-1,3-PROPANEDIOL, HEXANEDIOIC ACID AND 1,6-HEXANEDIOL 85959882

1,3-BENZENEDICARBOXYLIC ACID, POLYMER WITH 1,3-DIHYDRO-1,3-DIOXO-5-ISOBENZOFURANCARBOXYLIC ACID, 2,2-DIMETHYL-1,3-PROPANEDIOL, HEXANEDIOIC ACID AND 2-(HYDROXYMETHYL)-2-METHYL-1,3-PROPANEDIOL POLYESTER RESIN 68715924

1,6-HEXAMETHYLENE DIISOCYANATE 1,6-HEXAMETHYLENE DIISOCYANATE 822060

1-METHOXY-2-PROPYL ACETATE 1-METHOXY-2-PROPYL ACETATE 108656

1-PROPANOL, 2-METHYL- 1-PROPANOL, 2-METHYL- 78831

2,4-PENTANEDIONE 2,4-PENTANEDIONE 123546

2-BUTANONE 2-BUTANONE 78933

2-BUTOXYETHANOL 2-BUTOXYETHANOL 111762

2-HEPTANONE 2-HEPTANONE 110430

2-PROPANOL, 1-METHOXY-, ACETATE 2-PROPANOL, 1-METHOXY-, ACETATE 108656

2-PROPENOIC ACID, ETHYL ESTER 2-PROPENOIC ACID, ETHYL ESTER 140885

2-PYRROLIDINONE, 1-METHYL- 2-PYRROLIDINONE, 1-METHYL- 872504

ALIPHATIC ISOCYANTE ALIPHATIC ISOCYANTE 3779633

ALIPHATIC POLYISOCYANATE RESIN ALIPHATIC POLYISOCYANATE RESIN 28182812

ALUMINUM HYDROXIDE ALUMINUM HYDROXIDE 21645512

AMORPHOUS SILICA AMORPHOUS SILICA 7631869

AROMATIC NAPHTHA AROMATIC NAPHTHA 64742956

BENZENE BENZENE 71432

BENZENEPROPANOIC ACID, 3-(2H-BENZOTRIAZOL-2-YL)-5-(1,1-DIMETHYLETHYL)-4-HYDROXY-, C7-9-BRANCHED AND LINEAR ALKYL ESTERS BENZENEPROPANOIC ACID, 3-(2H-BENZOTRIAZOL-2-YL)-5-(1,1-DIMETHYLETHYL)-4-HYDROXY-, C7-9-BRANCHED AND LINEAR ALKYL ESTERS 127519179

BIS(1,2,2,6,6-PENTAMETHYL-4-PIPERIDINYL SEBACATE) BIS(1,2,2,6,6-PENTAMETHYL-4-PIPERIDINYL SEBACATE) 41556267

BUTANEDIOIC ACID, DIMETHYL ESTER BUTANEDIOIC ACID, DIMETHYL ESTER 106650

CYCLOHEXANONE CYCLOHEXANONE 108941

DIBUTYLSTANNIUM DILAURATE DIBUTYLSTANNIUM DILAURATE 77587

DIBUTYLTIN DILAURATE DIBUTYLTIN DILAURATE 77587

DIETHYLBENZENE DIETHYLBENZENE 25340174

DIMETHYL ADIPATE DIMETHYL ADIPATE 627930

DIMETHYL GLUTARATE DIMETHYL GLUTARATE 1119400

DIMETHYL PENTANEDIOATE DIMETHYL PENTANEDIOATE 1119400

DIMETHYL SUCCINATE DIMETHYL SUCCINATE 106650

ETHENE OXIDE ETHENE OXIDE 75218

ETHYL 3 ETHOXYPROPIONATE ETHYL 3 ETHOXYPROPIONATE 763699

ETHYL 3-ETHOXYPROPIONATE ETHYL 3-ETHOXYPROPIONATE 763699

ETHYL ACRYLATE ETHYL ACRYLATE 140885

ETHYL ACRYLATE 2-ETHYLHEXYL ACRYLATE POLYMER FLOW AGENT 26376863

ETHYL-3-ETHOXYPROPIONATE ETHYL-3-ETHOXYPROPIONATE 763699

FORMALDEHYDE FORMALDEHYDE 50000

GLUTARIC ACID, DIMETHYL ESTER GLUTARIC ACID, DIMETHYL ESTER 1119400

HEXAMETHYLENE DIISOCYANATE POLYMER HEXAMETHYLENE DIISOCYANATE POLYMER 28182812

HEXANE, 1,6-DIISOCYANATO- HEXANE, 1,6-DIISOCYANATO- 822060

HEXANE, 1,6-DIISOCYANATO-, HOMOPOLYMER HEXANE, 1,6-DIISOCYANATO-, HOMOPOLYMER 28182812

HEXANEDIOIC ACID, DIMETHYL ESTER HEXANEDIOIC ACID, DIMETHYL ESTER 627930

HEXANETHYLENEDIISOCYANATE POLYMER HEXANETHYLENEDIISOCYANATE POLYMER 28182812

LIGHT AROMATIC SOLVENT NAPHTHA (PETROLEUM) SOLVENT NAPHTHA, PETROLEUM, LIGHT AROM. 64742956

METHYL AMYL KETONE METHYL AMYL KETONE 110430

METHYL GLUTARATE DIBASIC ESTER 1119400

METHYL ISOBUTYL KETONE METHYL ISOBUTYL KETONE 108101

METHYL N-PROPYL KETONE METHYL N-PROPYL KETONE 107879

METHYL PROPYL KETONE METHYL PROPYL KETONE 107879

METHYL-N-PROPYL KETONE METHYL-N-PROPYL KETONE 107879

METHYLPYRROLIDONE, N- METHYLPYRROLIDONE, N- 872504

NAPHTHA, (PETROLEUM), HEAVY ALKYLATE NAPHTHA, (PETROLEUM), HEAVY ALKYLATE 64741657

N-METHYL-2-PYRROLIDINONE N-METHYL-2-PYRROLIDINONE 872504

N-METHYLPYRROLIDINONE N-METHYLPYRROLIDINONE 872504

N-METHYLPYRROLIDONE N-METHYLPYRROLIDONE 872504

PENTANEDIOIC ACID, DIMETHYL ESTER PENTANEDIOIC ACID, DIMETHYL ESTER 1119400

POLYMERIC HEXAMETHYLENE DIISOCYANATE HOMOPOLYMER OF HEXAMETHYLENE DIISOCYANATE 28182812

POLYMERIC HEXAMETHYLENE DIISOCYANATE POLYMERIC HEXAMETHYLENE DIISOCYANATE 28182812

PROPYLENE GLYCOL METHYL ETHER ACETATE PROPYLENE GLYCOL METHYL ETHER ACETATE 108656

PROPYLENE OXIDE ETHYLENE OXIDE POLYMER MONOBUTYL ETHER NON-IONIC SURFACTANT 9038953

PROPYLENE OXIDE ETHYLENE OXIDE POLYMER MONOBUTYL ETHER PROPYLENE OXIDE ETHYLENE OXIDE POLYMER MONOBUTYL ETHER 9038953

P-XYLENE P-XYLENE 106423

SILICA SILICA 7631869

SILICONE FLUID ACRYLIC COPOLYMER 68957051

SOLVENT NAPHTHA, PETROLEUM, HEAVY AROM. SOLVENT NAPHTHA, PETROLEUM, HEAVY AROM. 64742945

STANNANE, DIBUTYLBIS[(1-OXODODECYL)OXY]- STANNANE, DIBUTYLBIS[(1-OXODODECYL)OXY]- 77587

1,3-BENZENEDICARBOXYLIC ACID, POLYMER WITH 1,3-DIHYDRO-1,3-DIOXO-5-ISOBENZOFURANCARBOXYLIC ACID, 2,2-DIMETHYL-1,3-PROPANEDIOL, HEXANEDIOIC ACID AND 2-(HYDROXYMETHYL)-2-METHYL-1,3-PROPANEDIOL 1,3-BENZENEDICARBOXYLIC ACID, POLYMER WITH 1,3-DIHYDRO-1,3-DIOXO-5-ISOBENZOFURANCARBOXYLIC ACID, 2,2 68715924

BENZENE, 1-CHLORO-4-(TRIFLUOROMETHYL)- (9CI) BENZENE, 1-CHLORO-4-(TRIFLUOROMETHYL)- (9CI) 98566

BUTOXYETHOXYETHYL ACETATE BUTOXYETHOXYETHYL ACETATE 124174

BUTYL CARBITOL ACETATE BUTYL CARBITOL ACETATE 124174

CARBON BLACK CARBON BLACK 1333864

ETHANOL, 2-(2-BUTOXYETHOXY)-, ACETATE ETHANOL, 2-(2-BUTOXYETHOXY)-, ACETATE 124174

ETHYL ACRYLATE 2-ETHYLHEXYL ACRYLATE POLYMER ETHYL ACRYLATE 2-ETHYLHEXYL ACRYLATE POLYMER 26376863

HEXAMETHYLENE DIISOCYANATE HEXAMETHYLENE DIISOCYANATE 822060

LIMESTONE LIMESTONE 1317653

N,N-DIALKYLTOLUIDINES N,N-DIALKYLTOLUIDINES 613489

SILICONE FLUID ACRYLIC COPOLYMER 68957051

WOLLASTONITE WOLLASTONITE 13983170

2-(2-BUTOXYETHOXY)ETHYL ACETATE 2-(2-BUTOXYETHOXY)ETHYL ACETATE 124174

2-PROPENOIC ACID, ETHYL ESTER, POLYMER WITH 2-ETHYLHEXYL 2-PROPENOATE 2-PROPENOIC ACID, ETHYL ESTER, POLYMER WITH 2-ETHYLHEXYL 2-PROPENOATE 26376863

IMIDODICARBONIC DIAMIDE, N,N',2-TRIS(6-ISOCYANATOHEXYL)- IMIDODICARBONIC DIAMIDE, N,N',2-TRIS(6-ISOCYANATOHEXYL)- 4035896

ORTHO-CHLOROBENZOTRIFLUORIDE ORTHO-CHLOROBENZOTRIFLUORIDE 88164

SILICA GEL SILICA GEL 63231674

QUARTZ QUARTZ 14808607

SILICA, AMORPHOUS, PRECIPITATED AND GEL SILICA, AMORPHOUS, PRECIPITATED AND GEL 112926008

SILICONE FLUID SILICONE FLUID 68957051

ISOBUTYL ALCOHOL ISOBUTYL ALCOHOL 78831

1,3-BENZENEDICARBOXYLIC ACID, POLYMER WITH 1,3-DIHYDRO-1,3-DIOXO-5-ISOBENZOFURANCARBOXYLIC ACID, 2,2-DIMETHYL-1,3-PROPANEDIOL, HEXANEDIOIC ACID AND 2-(HYDROXYMETHYL)-2-METHYL-1,3-PROPANEDIOL 1,3-BENZENEDICARBOXYLIC ACID, POLYMER WITH 1,3-DIHYDRO-1,3-DIOXO-5-ISOBENZOFURANCARBOXYLIC ACID, 2,2-DIMETHYL-1,3-PROPANEDIOL, HEXANEDIOIC ACID AND 2-(HYDROXYMETHYL)-2-METHYL-1,3-PROPANEDIOL 68715924

1-BUTANOL 1-BUTANOL 71363

1-METHOXY-2-2PROPYL ACETATE 1-METHOXY-2-2PROPYL ACETATE 108656

ETHANOL ETHANOL 64175

GLYCOLS, POLYETHYLENEPOLYPROPYLENE, MONOBUTYL ETHER (NONIONIC) GLYCOLS, POLYETHYLENEPOLYPROPYLENE, MONOBUTYL ETHER (NONIONIC) 9038953

IRON OXIDE YELLOW IRON OXIDE YELLOW 51274001

PHOSPHORIC ACID, DIBUTYL ESTER PHOSPHORIC ACID, DIBUTYL ESTER 107664

PHOSPHORIC ACID, MONOPHENYL ESTER PHOSPHORIC ACID, MONOPHENYL ESTER 701644

PRECIPITATED AMORPHOUS SILICA PRECIPITATED AMORPHOUS SILICA 112926008

1,2-ETHANEDIAMINE, N-[3-(TRIMETHOXYSILYL)PROPYL]- 1,2-ETHANEDIAMINE, N-[3-(TRIMETHOXYSILYL)PROPYL]- 1760243

1,3-BENZENEDIMETHANAMINE 1,3-BENZENEDIMETHANAMINE 1477550

1,3-PROPANEDIAMINE, N-[3-(TRIDECYLOXY)PROPYL]-, BRANCHED 1,3-PROPANEDIAMINE, N-3[-(TRIDECYLOXY)PROPYL]-,BRANCHED 68479049

1-CHLORO-4-(TRIFLUOROMETHYL)BENZENE 1-CHLORO-4-(TRIFLUOROMETHYL)BENZENE 98566

1-CHLORO-4-(TRIMETHYL)BENZENE 1-CHLORO-4-(TRIMETHYL)BENZENE 98566

2,4,6,TRI(DIMETHYLAMINOMETHYL PHENOL) 2,4,6,TRI(DIMETHYLAMINOMETHYL PHENOL) 90722

2-BUTANOL 2-BUTANOL 78922

ALKYLATED PHENOLIC POLYAMINE ALKYLATED PHENOLIC POLYAMINE 868765939

AMINO SILANE ESTER AMINO SILANE ESTER 1760243

AMINOETHYLPIPERAZINE (1-10%) AMINOETHYLPIPERAZINE (1-10%) 140318

AMORPHOUS PRECIPITATED SILICA AMORPHOUS PRECIPITATED SILICA 112926008

AMYL METHYL KETONE AMYL METHYL KETONE 110430

AMYL METHYL KETONE, N- AMYL METHYL KETONE, N- 110430

AROMATIC PETROLEUM DISTILLATES AROMATIC PETROLEUM DISTILLATES 64742956

BENZAL ALCOHOL BENZAL ALCOHOL 100516

BENZENE, (1-METHYLETHYL)- BENZENE, (1-METHYLETHYL)- 98828

BENZENE, 1-CHLORO-2-(TRIFLUOROMETHYL)- BENZENE, 1-CHLORO-2-(TRIFLUOROMETHYL)- 88164

BENZENEMETHANOL BENZENEMETHANOL 100516

BENZYL ALCOHOL BENZYL ALCOHOL 100516

BENZYLDIMETHYLAMINE BENZYLDIMETHYLAMINE 103833

BISPHENOL A BISPHENOL A 80057

BISPHENOL A, (CHLOROMETHYL)OXIRANE POLYMER BISPHENOL A, (CHLOROMETHYL)OXIRANE POLYMER 25068386

BISPHENOL A, EPICHLOROHYDRIN POLYMER BISPHENOL A, EPICHLOROHYDRIN POLYMER 25068386

BISPHENOL…