PackagingRequirements.pdf

PACKAGING REQUIREMENTS

PRo MIPR, OR DOCUMENT 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate FD20201350444 c1ause(s) into Section 0 for applicable item(s) as indicated below.

1. PACKAGING REQUIREMENTS: Block 1 shall always be completed and rurther defined in Blocks 2, 3, or 4. The term ~Ilem 10M refers 10 line AFMC FARS 5352.247-9005, SHIPPING CONTAINER MARKING.

item number, item name, NSNfMMAC, pari number. or any other way of identifying a particular item. MIL-STD-2073-1 represents MiHlary ::::J NAME(s) OR NSN/MMAC

Preservation (PRES) and Packing (PACK). Military packing consists of levels A, B, and Minimum (M). ASTM 03951 could be substituted by another document il specified in Block 2_ Quantity Per Unit (aUP) and Commercial Best Practice (CBP) are abbreviated. The reverse side of AFMCFARS 5352.247-9006, MARKING OF WARRANTED ITEMS.

this form has the European Union environmental requirements. ITEM NAME(s) OR NSN/MMAC

COMMERCIAL SPECIAL PACKAGING

OUP MIL·STO-2073·1 ATSM 03951 cap INSTRUCTION AFMCFARS 5352,247-9007, SPECIFICATION COMMERCIAL

ITEM 10 PRES PACK PRES PACK NUMBER PACKAGING (ASTM 03951). ITEM NAME(s) OR NSN/MMAC

(#) (XI (AiB/M) (X) (XI (XI

AFMCFARS 5352.247-9008, CONTRACTOR COMMERCIAL

OOI-A.-\ - 004·AA 001 X X PACKAGING (Commercial Best Practice). ITEM NAME(s) OR

NSN/MMAC

AFMCFARS 5352.247-9009, MILITARY PACKAGING AND MARKING.

- ITEM NAME(s) OR NSNfMMAC

AFMCFARS 5352.247-9010. ENGINEERED OR SPECIALIZED

CONTAINERS (CDRS). ITEM NAME(s) OR NSN/MMAC

2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates of required specifications)

INTERNATIONAL STANDARDS for PHYTOSANITARY MEASURES IlSPM NO. 15) REOUIREMENTS ARE SHOWN ON THE BACK OF THIS DOCUMENT. AFMCFARS 5352.247-901'. PACKAGING AND MARKING OF

HAZARDOUS MATERIAL ITEM NAME(s) OR NSN/MMAC

AFMCFARS 5352.247-9013, PACKAGING DATA (Coded and/or/Special Packaging Instructions). ITEM NAME(s) OR NSN/MMAC

4. COOED DATA: Coded requirements shall be interpreted in accordance wilh MIL-STD-2073-1

QUANTITY PRES C PRES WRAP CUSH C UNIT INT ~ SPEC UNIT PACK WEIGHT UNIT PACK SIZE UNIT PACK CUBE P

QUP Ica METH 0 MTl MTl DUNN T CONT CONT l MKG 10 LENGTH 10 WIDTH 10 DEPTH 10 WHOLE CUBE 1000TH I

ORGANIZATION PACKAGING SPECIALIST (Typed Name) PACKAGING SPECIALIST SIGNATURE DATE

418 SCMS/GULAAA RICK MCCLOY 20121121

AFMC IMT 158, 20041210, V-1 PREVIOUSEDITIONIS OBSOLETE SEE REVERSE SIDE

THE FOLLOWING STATEMENTS ARE IN COMPLIANCE WITH THE UNITED NATIONS IMPLEMENTED RESTRICTIONS ON SOLID WOOD PACKING MATERIAL (SWPM). THESE REQUIREMENTS ARE SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. THE STATEMENTS BELOW CITE THE REQUIREMENTS IN DETAIL AND COVER LUMBER USED TO BUILD CONTAINERS, AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, THOUGH AIR LOGISTICS CENTERS (ALC's), CONTAINER CONSOLIDATION POINTS (CCPs), OR THROUGH OTHER BASES.

LUMBER AND PACKAGING/CONTAINER STATEMENT:

"ALL WOODEN LUMBER AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF SOLID WOOD PACKING MATERIAL (SWPM) SHALL BE CONTRUCTED FROM HEAT TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC)." FOR RE;FERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES I$PM NO. 15. THIS DOCUMENT CAN BE FOUND AT www.ippc.int.

WOODEN PALLET STATEMENT:

"ALL WOODEN PALLETS PRODUCED ENTIRELY OR IN PART OF SOLID WOOD PACKING MATERIAL (SWPM) SHALL BE CONSTRUCTED FROM HEAT TREATED (HT) MATERIAL (HT TO 56 DREGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC)," FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES ISPM NO. 15. THIS DOCUMENT CAN BE FOUND AT www.ippc.int.

AFMC IMT 158, 20041210 (Reverse) http://www.ippc.int.

http://www.ippc.int.