QALI_CLEA_FD2020-20-50151.pdf
PDF 117 KB Posted
- Attached to
- CHARGE ASSEMBLY Federal contract opportunity
- Solicitation number
- FA8213-20-R-3016
About this file
This document summarizes a federal contract solicitation for the procurement of charge assemblies and associated test plans and reports. The solicitation involves line items for first article test plans and reports to be delivered within 30 days of award, low-rate initial production charge assemblies to be delivered within 120 days of award, and higher-rate full production charge assemblies to be delivered in batches over a 12-month period following approval of the first article. The solicitation also provides pricing and delivery information for the line items. The solicitation is being issued by the Department of the Air Force Materiel Command Lifecycle Management Center and involves an incumbent contractor and another potential offeror. The solicitation includes requirements for charge assemblies as well as associated testing and reporting deliverables.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821320R3016-0002.pdf | ||
| FA821320R3016-0001.pdf | ||
| CDRLS_PR.pdf | ||
| ADC_SOW_Jan2018Final.pdf | ||
| Engineering_Data_List.pdf | ||
| Packaging_Statement_of_Work.pdf | ||
| CADPAD_Item_Marking_Instruction.pdf | ||
| Rework_and_Repair_of_Nonconforming_Material.pdf | ||
| GFPFA821320R3016_1.pdf | ||
| First_Article_CDRLs_FD2020-20-50151.pdf | ||
| REPSHIP.pdf | ||
| AIR_SPEC_FD2020-20-50151_REVISED_02.pdf | ||
| JFQR_ShapeChargeAssembly_009313590ES.pdf | ||
| FA821320R3016.RTF | RTF text file | |
| SPI.pdf | ||
| Item_Description_009313590ES.pdf |
Show all 16
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Contractor Name CAGE code
DCMA QAR Reviewer
Date Review Completed
Date Issued to Contractor
PR No. FD2020-
Date Contract Awarded
Final Delivery Date (FDD)
Program Name
DODIC
Part Number
The contractor is required to impose the listed below DCMA Inspection Points into the appropriate Work Orders.
All Work Orders pertaining to CRITICAL FLIGHT ITEMS must be identified on folders.
Mandatory - M: Stamp and/ or Signature on original documentation (i.e., Mfg. Planning, ATP, FAT Report, etc.)
Witness - W: GSI required to attend, may reduce level of effort after 50% of production lots found acceptable
Verification - V: Stamp and/or Signature required unless noted otherwise (may be done by written verification)
Monitor - R: Will monitor testing, may reduce to verification
Notify - N: By phone or email
Additional requirements: (DCMA reserves the right to impose additional inspection points as deemed necessary.)
Prepared by:
Date
THIS PLANNING SHEET WILL BE UPDATED IF NECESSARY.
QUALITY ASSURANCE LETTER OF INSTRUCTION
Planning Requirements
COMMENTS
NOTICE
Engineer
Noun
Sheet1
| Contract No: 20-50151 |
| Date Contract Awarded: |
| Final Delivery Date FDD: |
| Program Name: LGM30 |
| DODIC: 995-4999-2 |
| undefined: V |
| undefined_2: V |
| undefined_3: W |
| undefined_4: V |
| undefined_5: V |
| undefined_6: V |
| undefined_7: N |
| Text19: Ensign Bickford, Pacific Scientific |
| Text20: 96336, 06331 |
| Text21: |
| Text22: |
| Text23: |
| Text24: 1.Inspection |
| Text25: 2. X-Ray/N-Ray |
| Text26: 3. LAT |
| Text27: 4. Preparation for Shipment |
| Text28: 5. AMMO Data Card Review |
| Text29: 6. Shippers (DD250, DD1149, Reports) |
| Text30: 7. Additional Requirements |
| Text36: 1. Verify that the Explosive Weight is identified and meets drawing and hazard classification requirements. |
2. Ensure film labeling correct. Ensure radiographic film readable / well-defined. DCMA not required to interpret film.
3. Prior to LAT ensure proper calibration and validation of all test equipment. Testing should occur in accordance with latest government approved ATP.
4. Ensure Paperwork is correct.
5. Verify all energetic materials: list original manufacturer, original lot no., and latest certification/recertification date < 24 months.
6. Ensure Paperwork is correct. Verify Packaging, Packing, Preservation & Marking (PPP&M)
7. Notify and obtain approval from the Project Engineer for any additional requirements imposed by DCMA.
| 2020-04-06T14:47:13-0600 | |
| JOHNSON.AVERY.STEVEN.1457505112 |
| Text46: 6 Apr 2020 |
| Type name_1: |
| Part Number: KY69 |
| Noun: CLEA |
File details come from the government source that posted it. Updated .