IWTP SCADA 90percent Design 12-12-11.pdf

This document is a 90% submittal of electrical design and SCADA system specifications for an Industrial Waste Treatment Plant at Hill Air Force Base in Ogden, Utah, dated December 12, 2011. The project is designated FA8201-09-D-0004-0005 and involves the Department of the Air Force's Ogden Air Logistics Center, 75th Civil Engineer Group.

The electrical design package encompasses comprehensive SCADA (Supervisory Control and Data Acquisition) system specifications including 120VAC and 24VDC power distribution panels, PLC (Programmable Logic Controller) power supplies, convenience receptacles, and an eight-port Ethernet switch for system connectivity. The electrical schematic drawings detail modular configurations for multiple I/O (input/output) terminals, field devices, and control circuits organized across numerous sheets (sheets 6-37 of the drawing set). Component specifications include terminal numbering conventions noted as preliminary, with actual terminal assignments to be confirmed during installation, and fuse specifications defaulting to 1 AMP fast-blow ratings unless otherwise specified. The drawings incorporate standardized electrical symbols, materials legends indicating concrete masonry units, face brick, insulation types, and various control elements. Engineering support was provided by Bowen, Collins and Associates (Draper, Utah) and Tetra Tech (Salt Lake City, Utah), with the design establishing the foundational electrical infrastructure required for automated waste treatment plant operations and monitoring.